Collection of selected, peer reviewed papers from the 2013 International Conference on Application of Materials Science and Environmental Materials, (AMSEM 2013), July 5-7, 2013, Zhangjia Jie, China.
The 125 paper are grouped as follows:
Chapter 1: Environmental, Ecologic Materials and Technologies, Health Applications;
Chapter 2: Materials Engineering Research, Materials in Manufacturing Processes;
Chapter 3: Chemistry Materials and Environmental Chemistry;
Chapter 4: Energy, Fuel Materials and Engineering;
Chapter 5: Prevention of Water Environment Pollution.

Les mer
<p>Selected, peer reviewed papers from the 2013 International Conference on Application of Materials Science and Environmental Materials, (AMSEM 2013), July 5-7, 2013, Zhangjia Jie, China</p>
  • Preface and Organizing Committee
  • Chapter 1: Environmental, Ecologic Materials and Technologies, Health Applications
  • Study on Optimization Quartz Mine for Removal Gas-Liquid Inclusions in Quartz Sand under Microwave and Acid Corrosion
  • Development of the Tunnel Wet Dust Precipitator and Testing
  • Preparation of Floating TiO2/EP by Hydrothermal Method
  • The Research on the Heat Transfer Process of Low Temperature Hot Water Radiant Heating Phase Change Wallboard
  • Determination of the Competitive Ion Exchange Isotherms of Taurine and Glycine on D290 Resin by Inverse Method
  • A New Type of Self-Assembled Fluorescent Chemosensor
  • A Preliminary Study on Influence of Anion Created by Anion-Fiber Used for Decorative Material on People's Physiology and Psychology
  • The Environmental Effect of Radioactive Particles in the Contaminated Sites with Resuspended Plutonium Aerosols
  • Study on Application of Artificial Sand in Ready-Mixed Concrete
  • Preparation and Characterization of Composite TiO2/Natural Cotton Nanofiber Material
  • Based on Molecular Distillation Waste Organic Matter Reduction Processing Technology Research
  • Application of Priority Analysis and Algorithm Topsis in the Optimization of Ambient PM2.5 Monitoring Sites – Taking Beijing as an Example
  • The Best Culture Conditions of Rhodopseudomonas spp. by Orthogonal Experiment
  • Experimental Study on Regularities of Carbonation for CO2 Capture Using Ammonia Solution
  • Research on Recycling and Utilization of Waste Ink
  • Removal of Methylene Blue from Aqueous Solution by Adsorption on Low-Grade Green Coffee Beans
  • Review on the Unbroken Three-Dimensional Network Modification Methods of Waste Rubber Powder
  • The Investigation of the Deicing Salt Effect on Soil in Beijing
  • Study of Reborn Concrete Block Using Construction Wastes
  • Comparative Study on the Different Coagulants for Mine Water
  • The Activity and Characterization of Pd/Ce0.5Zr0.5O2 Catalyst for the Reduction of NO
  • Oxidation Treatment of Phenol Contaminated Soil Using Potassium Ferrate (K2FeO4)
  • Research and Discussion of the Low-Salt Dyeing of Reactive Dyes
  • Structure and Thermal Stability of Sugarcane Bagasse Cellulose Regenerated from Dialkylphosphate Ionic Liquids
  • Performance Analysis of the Domestic and Imported Portable SO2 Gas Analyzers for Stationary Pollution Source
  • Study of the Microstructure of Industrial Residues and its Application in High Performance Concrete
  • Study on the Infrared Property and the Structure of Schorl Calcined at the High Temperature
  • Source Apportionment of Heavy Metals in Sediment Using CMB Model
  • Experimental Research on Fly Ash Modified Adsorption of Mercury Removal Efficiency of Flue Gas
  • Difference Analysis of the Organic Acids Content of the Different Leaf Position in Flue-Cured Tobacco
  • The Factors Affecting the Stem Water Potential of Tamarix ramosissima Lbd. in the Extremely Arid Regions
  • Study on Experimental System for High Temperature Ceramic Filter
  • Effects of Sepiolite and Mycorrhizals on Nutrient Element Absorptions of Maize in Heavy Metals Contaminated Soil
  • Desorption of Anthracene from Soil in Presence of Surfactant and Nanomaterial
  • Research on a Technique of Eco-Friendly Chemical Conversion Coating
  • Preparation of Adsorbents Based on Dendrimer Modified Silica Gel and its Adsorption Performances for Lead
  • Optimization of Enzyme-Assisted Lycopene Extraction from Tomato Processing Waste
  • Research of Heavy Metal Particle and Ions Absorption Mechanism of Ordinary Portland Cement Materials
  • The Research on the Mechanical Properties of the same Curing Agent of Different Soil Dredged Mud
  • Chapter 2: Materials Engineering Research, Materials in Manufacturing Processes
  • Research Progress of Slicing Method for Solar Silicon Wafer
  • Dynamic Buckling Behaviors of Steel Cylindrical Shell Subjected to Conventional Explosion Impact Loading
  • Porosity Formation after the Irradiation Termination of Laser
  • Study of High-Power White LED's Lifetime Based on Accelerated Life Test
  • Molecular Dynamics Simulation of Thermal Conductivity of 3C-SiC Nanowire
  • Study on Ultrasonic Measurement for Non-Uniform Stress Field
  • Mechanical Structure Strength Analysis of Field Refueling Tank Based on ANSYS
  • Study on the Influences on Microstructure and Properties of High-Strength Grey Cast Iron in Addition to Alloying Elements Nb
  • Effects of Y, Gd on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy
  • SVM Based Seismic Fragility Analysis for RC Isolated Continuous Girder Bridge
  • Finite Element Analysis on Connecting Rod Fracture Splitting with Abaqus
  • Experimental Research on Shape-Stabilized Phase Change Materials Applied in the Phase Change Wall
  • Preparation of Coherent La0.85Sr0.15MnO3 Thin Films on La0.6Sr0.4Co0.2Fe0.8O3 Substrates
  • Electroless Silver Plating Process on Al-Ag Alloy Powder
  • A Novel Green-Emitting Phosphor: LiLa2BO5:Ce3+,Tb3+ with High Luminescence Efficiency
  • The Effects of Small Additions Ga and Al on the Microstructure and Tensile Properties of Sn-Zn Based Lead-Free Solders
  • Constitutive Equation of Mg-3.5Zn-0.6Y-0.5Zr Alloy under Hot Compression Deformation
  • Preparation and Photocatalytic Property of Zinc Oxide Nanoparticle
  • The Basic Research and Application on Hot Forming of High Strength Steel
  • Research on High Ductility Cementitious Composites Improved by Water-Soluble Polymer and Micro-Fibers
  • Study on the Welding Process and Application of Al/Cu Materials
  • Free-Template Synthesis of Cu2O Nanocubes via Hydrothermal Route
  • Artificially Induced Defects in Photonic Crystals and their Optical Properties
  • The Magnetic Properties of Fe-6.5wt.%Si Alloy Powders Produced by High Pressure Gas Atomization
  • A Review on Engineering Application of FRP Material: Case Study and Practice
  • Fabrication of Strong Photoluminescent Carbon Nanodots and its Preliminary Application in Cell Imaging
  • Study on the Run-in Process between the Contact Line and Saddle of High-Speed Rail
  • Effect of Technical Factors on the Quality of Surface Composite Layer
  • Analysis on the Contact Mechanics between Tip and Sample in Atomic Force Acoustic Microscope Method
  • Effect of Hydraulic Classification on Iron Ore Tailings Preparing High Strength Construction Materials
  • Entity Simulation of Rectangle Preform for 3D Braided Composite Based on ANSYS
  • Assessment of Heat Resistant Concrete of Magnesia-Phosphate
  • Force Analysis of Steel Column Base Plate Base on the Interaction Principle
  • Preparation and Friction Performance of the Nano Ag-APS Single Molecular Self-Assembled Film
  • Weibull Analysis of the Effect of Modified Aging Treatments on Fatigue Life of Cast Aluminium Alloy 354
  • Durability of Concrete Containing Wollastonite and Fly Ash
  • Effect of Cathodic Protection Systems with Zn-Mesh Sacrificial Anodes on Reinforced Concrete Structures in an Accelerated Marine Environment
  • Influence of Heat Treatment on the Microstructures and Properties of Mg-12Li-3Gd-3Y-0.6Zr Alloy
  • Microstructures and Mechanical Properties of Magnesium-Lithium Alloys by Homogenizing Treatment and Thermal Process
  • Study on Short Basalt Fiber Reinforced Silicone Rubber Composites
  • Chapter 3: Chemistry Materials and Environmental Chemistry
  • Factors Evalution of Particle Size Distribution of Heavy Oil Emulsion
  • Low-Temperature Hydrothermal Synthesis and Electrochemical Properties of Birnessit-Type Manganese Dioxide Nanosheets
  • Structural, Magnetic, and Transport Properties of La0.62Sb0.38MnO3 Ceramic
  • Optical Properties of Water-Soluble Er-Doped ZnS Quantum Dots Synthesized by a Hydrothermal Process
  • Preparation of PANI Nanotubes by Template Electrosynthesis
  • Degradation of Polyacrylamide: A Review
  • Thermochemical Properties of Dissolution of Nitroguanidine in Dimethyl Sulfoxide and N,N-Dimethylformamide
  • Selective Oxidation of Glycerol with O2 Catalyzed by Fluorine-Modified CuNiAl Hydrotalcite
  • The Effect of Chain Length on Polyelectrolyte Brushes Formed from Adsorption of Diblock Copolymers
  • The π Bond of C2H4 and 2HX(X=F,Cl,Br,I) Interaction
  • Sub-Micrometer SiO2@ZnMoO4:Tb3+ Core-Shell Phosphors: Sol-Gel Synthesis and Characterization
  • Study on Adhering Technology of Silicone Foam Surface
  • Synthesis and Properties of P2O5-SnO2-ZnO Penetrated into Silica Aerogel Matrix by Sol-Gel Technique
  • One Based Magnetic Oxygen Carrier Solid Fuel Chemical Looping Combustion System Simulation
  • The Influence of Interactions between Polyethylene Glycol and Graphene Oxide in Shape-Stabilized PCMs on their Phase Change Behaviors
  • Preparation and Photocatalytic Activity of TiO2/Tourmaline Composite Catalyst
  • The Preparation and Research of Microcapsules in Self-Healing Coatings
  • Study on the Adsorption of O-Aminobenzoic Acid (OABA) with the Adsorption Resins Modified Chemically
  • Chapter 4: Energy, Fuel Materials and Engineering
  • Output Voltage Control of PEM Fuel Cell Based on Neural Network
  • The Research of Electrochemical Properties of Al-Mg-Sn-Ga-Bi Alloys in Alkaline Electrolyte
  • Effects of Solid Solution Treatment and Rolling Treatment on Electrochemical Properties of Al Anode Alloy
  • Influence of Temperature Distribution on Products Quality in 3KA Rare Earth Electrolytic Cell
  • The Effect of CTAB Additive on Performance of Layered Cathode Material Li0.96Na0.04Ni1/3Co1/3Mn1/3O2
  • Hybrid Supercapacitors Based on Polyaniline/Activated Carbon Fiber Composite Electrode Materials
  • Thermo-Gravimetric Analysis and Kinetic Study of Biomass Pyrolysis
  • Kinetic Investigation of Thermal Decomposition Reactions of 4'-Demethypodophyllotoxin and Podophyllotoxin
  • Facile Synthesis of Graphene Nanosheets and their Anode Electrochemical Performances in Lithium Ion Batteries
  • Platinum Nanoparticles Supported on Noncovalent Functionalized Graphene as Cathode Catalysts for Aluminum-Air Batteries
  • Electro-Copolymerization of Poly(N-Vinylcarbazole) and 3-Methylthiophene
  • Chapter 5: Prevention of Water Environment Pollution
  • The Optimization of Pb(II),Cu(II),Zn(II) and Cd(II) Ions Removal by Micro-Electrolysis Using Response Surface Methodology
  • Recovery of Polyvinyl Alcohol Wastewater with Sodium Polyphosphate
  • Application of the Intelligent Control System of Biological Aerated Filter Wastewater Treatment
  • Destruction of EDTA by Bimetallic Al-Fe/O2 Process under Aqueous Room Temperature and Pressure Conditions
  • Research on a New Method of Treating Organic Wastewater and Equipment
  • Chloramphenicol Removal from Wastewater by UV/H2O2 Advanced Oxidation Process
  • Experimental Study of the Porous Plate Hydrodynamic Cavitation Device and Removal the Algae in Water
  • Humic Acids Degradation and Membrane Fouling in Photocatalytic MF Systems for Drinking Water Treatment
  • Study on the Treatment of Oil Shale Retort Wastewater by High Performance Compact Reactor
  • Preparation of Carboxymethyl Cellulose Sodium/PEI Nanofiltration Membrane
  • Polluted River Water Treatment Using Multi-Soil-Layering System (MSL) in Different Surface Loads
  • Application of CRBD to Reducing Pollution of Leather Tanning Wastewater
  • Preparation of Mn-Fe Binary Oxide for Arsenic Removal from Aqueous Solution
  • Degradation of Ammonium butyl-dithiophosphate by Fe2+/NaClO Process
  • Surface Modification of PS Super-Filtration Membranes with Low Temperature Plasma
  • Solar Biogas Digester and Wetland-Pond System for Rural Wastewater Treatment
  • Experimental Research on Adsorption Treatment of Military Agent Contaminated Water Using Activated Carbon
Les mer

Produktdetaljer

ISBN
9783037858509
Publisert
2013-12-06
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
33 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
650

Redaktør