Produktdetaljer
ISBN
9783037856512
Publisert
2013-05-03
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
3300 gr
Høyde
240 mm
Bredde
170 mm
Dybde
90 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1800
The peer reviewed papers in this 2 volumes set show the latest developments in the field of Mechatronics and Applied Mechanics. In particular, they cover topics of Manufacturing Technology and Processing, Mechatronics and Automation, Mechatronics and Embedded System Applications and Applied Mechanics and Other topics.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The papers are grouped as follows:
Chapter 1: Manufacturing Technology and Processes, Design, Modelling, Simulation and Mechanical Engineering;
Chapter 2: Robotic, Automation, Sensors, Detection and Monitoring Technologies;
Chapter 3: Development Elecrtonics, Networks, Information Technology and Algorithms in Systems Applications;
Chapter 4: Mechanics, Thermal and Dynamics Systems, Vibration, Noise, Applied Mechanics and Numerical Simulation Applications;
Chapter 5: Materials Science and Technology, Material Manufacturing Processes;
Chapter 6: Control System Modeling and Applications;
Chapter 7: Developments in Medical Technologies and Images Processing Technologies.
Les mer
<p>Selected, peer reviewed papers from the 2nd International Conference on Mechatronics and Applied Mechanics (ICMAM 2012), December 6 – 7, 2012, Honkong, December 8–9, 2012, Taipei</p>
- Preface, Committees and Sponsors
- Chapter 1: Manufacturing Technology and Processes, Design, Modelling, Simulation and Mechanical Engineering
- Simulation of Microbubbles Drag Reduction on Nonsmooth Surface with Hydrophobic Property
- The Research on Rake-Car’s Driving System of Ore Reclaimer
- The Sequence Injection Analysis of Automobile Air Inlet Grille Plastic Part
- Research on the Simulation of Self-Synchronization of Dual Mass for Vibrating System with Two-Motor Drives
- Current Situation of and Development Strategy for Non-Road Multi-Cylinder Diesel Engine with a Small Power
- Effect of End of Injection Angle on Performance and Emission Formation for a Gasoline Engine
- Mechanical Performance Simulation Model Based on PDM
- Hierarchical Pipe System Disassembly Sequence Planning by Dynamic Self-Adaptive Tree Based Motion Planning
- Development of Hydraulic Oil-Fired Deicing System for Aircraft Deicing Vehicle
- Architecture Design and Realization for Virtual Manufacturing Oriented CAPP System
- AGV Scheduling Optimizing Research of Collaborative Manufacturing System Based on Improved Genetic Algorithm
- Aerodynamic Characteristics Analysis of High-Speed Train on Cutting under Crosswinds
- Investigation on the Simulation of Nonlinear Switch Load in Three Phase Coordinate System
- Research of Chaotic Phenomenon for a Synchronous Reluctance Motor
- CMMI Based System Software Process for Industrial Manufacturing System
- A Knowledge Based Approach for Product Variant Design
- The Dynamic Software Development Process for Industrial Manufacturing System
- Developing an Audio News System Based on Android
- Dynamics Analysis and Power Allocation Strategy Research for a New Hybrid Electric Urban Rail Vehicle
- Multidisplinary Optimization of Crank-Link Mechanism of HCPE Based on iSIGHT
- Experimental Study on Combustor Outlet Temperature Field of Gas Turbine
- Research on Low Voltage Ride-Through Technique in DD-PMSG Wind Power Generator System
- 3D Reconstruction Method of Bent Tube with NURBS Curve
- Comparison of LES and RANS Models in Compartment Fires Simulation
- WSN System Based on Weight Adjust for Machinery Manufacturing Machine Monitoring
- Blanking of Plastic Forming Simulation and Analysis Based on the DEFORM
- Study on Simulation of Ocean Wave Generation System Based on SIMULINK
- Single-Row Facility Layout Based on Manufacturing Costs
- Ship Cabin Layout Optimization Design Based on the Improved Genetic Algorithm Method
- Experiment Research and Model on Drilling Force of CFRP
- Retrieval and Clustering for Multiple Disciplines Design Knowledge Based on Ontology and Semantic
- The Simulation Study for Energy-Absorbing Properties of the Railway Vehicle’s Anti-Climber with Different Vertical Offsets
- The Study of Marine Gas Turbine Power System Simulation Software Development
- Fault Tree Analysis of Vehicle Engine Lubricating Oil’s Failure
- Instantaneous Storage Availability Model: Considering Spare Parts Degradation before Replacement
- Experimental Research on Parameters Identification of Dynamic Characteristic for Parallel Machine Tool
- Experimental Study of Atomization Characteristic of Air Blast Atomizer
- Short-Term Wind Speed Forecasting Based on Optimizated Support Vector Machine
- Simulation of Toothpaste Flavor Transportation in Oral and Nasal Cavity during Respiration
- Theory and Technique on Design of Extended Range in Solar Powered Intellective Vehicles
- A CO2 Laser Camera
- The Simulation Analysis of a Micro Electromagnetic Harvester Based on Vibration Energy
- Optimal Channel Choice under Stochastic Demand with Multiplicative and Additive Shocks
- Study of V/H/J of Pointing-Lapping for Hypoid Gears
- Finite Element Analysis and Optimal Design of Frictional Roller
- Optimization of Loss Models for Centrifugal Compressor Performance Prediction Based on Numerical Analysis Results
- Conversion CL Data to NC Data Using an Instinctive Method for Non-Orthogonal Table-Type 5 Axis Machines
- The Evaluation for Technological Innovation Capability during Product Development of Auto Parts Enterprises
- Finite Element Simulation of the Artificial Knee-Joints of Similar Type Pairing
- Modeling Methods of Cylindrical Surface Form Error by Precision Turning for Assembly
- Analysis on Milling Force Based on AdvantEdge FEM
- Discussion on Modeling Approach of 3-Dimensional Models Based on Web3D
- Simulation of Two Dimensional Nanoscale Cutting Copper by Quasi-Steady Molecular Statics Method
- Research on the Starting Characteristics of the Linear Engine System Using the Eccentric-Slider Starting System
- New Collaboration between Engineer and Product Feature Generation in Industrial PLM Systems
- Vertical Tail Topology Optimization Design Based on the Variable Density Method with Constraint Factor
- Structural Drag Reduction in Taylor-Couette Flow
- Simulation Research on Vibration of Valve Mechanism for Diesel Engine Based on AMESim
- Simulation of Deployment Process of Junction Box
- The Research and Development of VB and Solidworks-Based 3D Fixture Component Library
- Design and Optimization of Electromagnetic Structures for Linear ISG Used in Range-Extended Electric Vehicle
- Multiple Momentum Term BP Algorithm and its Application in Hot Rolling AGC System
- Variant Design Method of Series Products Based on Skeleton
- Construction of the Information Model of Ancient Architecture Components Based on BIM - A Case Study of Bracket Sets
- The Research on Traction Simulation for a New Hybrid Power Train
- Design of Hybrid Electric Bus on Regenerative Braking System
- Design of 3D Modeling for the New Wave Power Generation Device and Test
- The Rolling Bearing Fault Diagnosis Research Based on Improved Hilbert-Huang Transformation
- Chapter 2: Robotic, Automation, Sensors, Detection and Monitoring Technologies
- Biomimically Leg-Kinematics on Walking Robots
- The Design and Implementation of Hexa-Rotor Aerial Robot
- A Low-Cost Stewart Platform for a Radio Telescope
- Electro-Mechanical Maximum Power Point Tracking of Photovoltaic System
- Analysis on Energy Efficiency of a Rolling-Jumping Robot
- Implementation of a High-Precision Ultrasonic Rain Gauge
- Development of the Escaping Programming System for Fire Environment
- Design of Small Laser Tracking System Based on Four-Quadrant Detector
- Design and Implementation Based on ADXL213 of the Digital Inclinometer
- Adaptive Interacting Multiple Model Unscented Particle Filter for Dynamic Acoustic Array
- Exquisite Design of a CCD Analog Front End Module
- Approximate Analytical Solutions of the Pull-In Behavior of an Electrostatically Actuated Clamped-Clamped Micro-Beam
- Three-Dimensional Structure Trajectory Guiding Scan and Points Cloud Registration
- Digital Closed Loop Fiber-Optic Current Sensor Based on Integrated Optical Phase Modulator
- Dynamic Analysis of Eyeball Mechanism on Android Robots
- Vision Sensor Application for Intelligent Polishing Robotic Cell
- Development of Intelligent Fire Detection Module Using Optic-Sensors
- Highway Mechanical and Electrical Engineering Quality Evaluation Methods Discussion
- Motion Planning of Lineclimber, a Robot for Inspection of Transmission Lines
- Design of Temperature and Humidity Monitoring System for Marine Working Platform
- Lower Distortion in Trajectory Planning for a Rigid-Flexible Manipulator Based on PSO Algorithm
- Shielding Method for the Capacitive Touch-Sensor
- Study on Fault-Tolerant Method of Mobile Robot Integrated Navigation
- A Study of Robot Car Positioning System in Small Area Based on Optical Mouse Sensor
- Modeling and Development of a Robotized Hand-Hold Bone Cutting Device
- Research on Real-Time Vision Detection Method for Sanitary Labels
- Monitoring System with Wireless Sensor Network: A Survey
- The Indoor Automatic Guided Vehicle with an IR Positioning and Low-Cost Inertial Navigation System
- Analysis of Underwater Wet Welding Seam Forming Based on Arc Sensor Information
- Research of Facular Energy Distribution for Pulsed Laser Tracking System
- Robot Fish with Novel Wire-Driven Continuum Flapping Propulsor
- The Summary on Robot Moving Platform
- Target Searching of Mobile Robots Using Improved A* Searching Algorithm
- Fast and Accurate Event Detection Based on Wireless Sensor Networks Using Fuzzy Logic Method
- The Unbalance Current Effect Caused by Non-Uniform Inductors in the Multi Phase Converter with a Single Current Sensor
- The Design of Permanent Magnetic Adhesion System for Wall-Climbing Robot
- Comparison of the On-Line Power Detection and Prediction System
- The Modeling and Simulation of Hexa-Rotor Aerial Robot
- Application of Conductive Rubber Filled by Carbon Black for 3-D Force Measurement
- An On-Line Monitoring System of Temperature Field in Tire
- The Best Path Planning of Home Care Robot by Building a Conceptual CBR Framework
- Design and Analysis of a Non-Vision-Based System for Detecting Unstable Gait
- Application of Mobile Robot System for Cell Production
- Implementation of Sun Tracking for Solar Cell with Maximum Power Point Tracking
- Construct Small-Scale Vertical Axis Wind Turbine Monitoring System by Wireless Sensor Networks
- Battlefield Awareness Network Research Based on Intelligence Role Division and Wireless Sensor Network
- Design and Fabrication of Micro-Coil Sensor Array by Using UV-LIGA Process
- Monitoring of Human Driver Behavior by Vehicle Trajectory Reconstruction for Transportation Safety Management
- Structural Optimization of MEMS-Based Hydrophones with Perforated Active Membrane
- Fault Detection of Robot Control Systems Based on Available Wireless Network Measurements
- The Research And Design of Wireless Coal Mine Safety Network Monitoring System On The Basis of ZigBee
- Wireless Power and Information Synchronous Transmission Technology Based on Magnetic Resonance
- Chapter 3: Development Elecrtonics, Networks, Information Technology and Algorithms in Systems Applications
- A New Adaptive Square-Root Unscented Kalman Filter for Nonlinear Systems
- Near-Optimality in Stochastic Control of an Capital Accumulation System with Markovian Switching and Poisson Jumps
- The Study on the Calculation Method of Bin Actual Coverage Based on the GPU Acceleration
- Fault Diagnosis Method of Time Domain and Time-Frequency Domain Based on Information Fusion
- Comprehensive Evaluation of Regional Grid Development Level of China under the Smart Grid Construction
- A Mixed-Integer Memetic Algorithm Applied to Batch Process Optimization
- Method of Data Transmission for Penetration Information Based on Flexible Connecting Cable
- A Method to Ascertain Parameters of Samples and their Feature Weights in the Weighted Fuzzy Clustering
- The Research of Particle Swarm Algorithm Based on Heuristic Rules for the Layout of Airplane Equipment Cabin
- The Web Service Framework for SaaS in Cloud Computing Environment
- Porting RT-Thread to Cortex-M3 Processor
- Identification of Precision Positioning Stage Based on ARX Model
- A New Approach to Flat Form Error and Contact Error Analysis
- Hydraulic Balance Optimization Calculation and Experimental Research on Model of Fluid Network System
- The Identification of Quality Attributes for SaaS in Cloud Computing
- Design and Implementation of Virtual Maintenance Training System Based on Ngrain Aviation Equipment
- Simulation Test System of CCD Signal Processor Based on FPGA
- The Supplier Management Problems and Analyses of The Mechatronic Manufacturing Enterprises
- Optimization of Flapper Compliant Mechanism Using Fuzzy Logic Combined Taguchi Method
- Fault Diagnosis Method of Rolling Bearing Based on Ensemble Local Mean Decomposition and Neural Network
- A Robust P300-Speller Brain-Computer Interface Based on Kernel PCA
- A Novel Improved Algorithm of Radial Feature Code Extraction
- Embedded Machine Vision System Design Based on Davinci DM355
- A Novel Fuzzy Clustering Method with No Outliers Influence
- Dynamic License Plate Localization for Vehicles on Multi-lane Using Single Camera
- Application of Weighted Projection PM Algorithm in Estimation of DOA
- Chapter 4: Mechanics, Thermal and Dynamics Systems, Vibration, Noise, Applied Mechanics and Numerical Simulation Applications
- Research on Wavelet Compression and Reconstruction of Wind Turbine Vibration Signal
- System-Reliability Evaluation Based on Series Chain Model under Exponential Distribution
- A New Method for the Eigenvalue Problem of Structures with Uncertain-but-Non-Random Parameters
- Numerical Investigation on the Effects of Sample Wire Motion in a Tube Furnace
- Application of Ghost Body-Cell Method on Adaptively Refined Cartesian Grid in Computational Fluid Dynamics
- The Study of Blockages Effect at Leading Edge on Rectangular Cavity in Subsonic Flow Using Particle Image Velocimetry (PIV)
- Axial Deformation of Ball Screw Considering Contact Angle
- A Study of Experimental Method for Mechanical Properties of Solid Propellant under Hydrostatic Compressive Loading
- Thermal Analysis of Heating System in Thermosonic Bonding Process
- Analysis of Incidence of Rail Failure and Track Composite Irregularity State Forecast
- Symmetrical Dynamic Propagation Problems of Mode III Interface Crack
- Applications of Statistical Energy Analysis in Influencing Factors Analysis of Aircraft Vibro-Acoustic Response Characteristics
- Finite Proximate Method for Simulating Flood Propagation in Complicated River Channel and Flood Detention Area
- Tool Orientation Planning for Four-Axis CNC Machines
- Optimum Design of Rubber Isolator Based on Nonlinear Finite Element Method
- Influence of Liquid Paraffins in Crude Oil on the Friction and Wear Behaviors of the Progressing Cavity Pump`s Stator Rubber
- The Beauty of Molecule Motion
- Short-Term Wind Speed Forecasting by Using Chaotic Theory and SVM
- A Research on Gaussian Process Based Feature Extraction
- An Experiment Based Reach Model for Fighter Cockpit Design
- Using DOProC Method in Structural Reliability Assessment
- Fatigue Analysis for the Aircraft Landing Gear Connecting Parts
- Research on the Pressure-Measuring Uncertainty of Standard Internal Crusher Gauge
- Mechanical Property Parameters Prediction of Tube Based on RBF Neural Network
- Size Effect on Pull-In Behaviors of Electrostatically Actuated Cantilever Micro-Beams
- Numerical Analysis of Bubble Motion Characteristics within Vertical Rectangular Micro Channels
- The Noise Source Localization of Industrial Sewing Machine by NAH Method
- Structural Design of Primary Mirror Subassembly for Space Telescope
- Finite Element Numerical Simulation Computation of Kitchen Units under the Condition of Stacking and Horizontal Controlled Impact
- PZT Acoustic Energy Harvester Arrays with Dual Top Electrodes
- Real-Time Monitoring for Vehicle Brake Temperature Rise in Continuous Long Downhill
- Multi-Physical Analysis of Eddy Current Damper (ECD) for Reaction Force Compensation Device
- Mobility Deposition Effect of Aerosol Particles in the Boundary Layer
- Research on the Theories of Self-Synchronization of Dual Mass for Vibrating System with Two-Motor Drives
- Study of Thermal Management System for a Series-Parallel Hybrid Electric Vehicle Using Numerical Simulation
- Investigation of the Magnetic Signals for the Ferromagnetic Components after Tensile Fatigue under Weak Magnetic Excitation
- The Over-Range Collocation Method for Nonlinear Analyses
- Foundation Pit Excavation on Surrounding Buildings Effect Analysis
- Experimental Estimation of Shear Wave Velocity Profile Using MASW Method and Inversion Technique
- Rough Road Identification Method Based on Engine Speed Variation Rate
- Independent Velocity Measurement of Small Underwater High-Speed Moving Body Based on External Turbine
- Harmonic Analysis of the High-Speed Winder with Unbalance Masses
- Analysis of Modal Properties of Spur Planetary Gears
- The Field Inspection and Research of Related Problems about a Kind of Non-API Thread Connections
- Analysis of Bifurcations for a Functionally Graded Materials Plate
- Research on the Random Vibration Cumulative Fatigue Damage Life Based on the Finite Element Analysis
- Simulation Research on Motion Law of Arresting Hook during Landing
- Novel Equivalent Circuit Model for Spiral Inductors on Lossy Silicon Substrate
- Analysis for the Syngas Composition of Gasifier
- Design of Amplifying Circuit for Receiving Weak Signal for Laser Fuze
- Determination of Stator Temperature Distribution for a Synchronous Machine
- Research on Heat Transfer Regulation of Power-Split Hybrid Electric Vehicle under Silent Watch Operation
- Wind Tunnel Experiment and Numerical Simulation of the Pressure Distribution on a Sedan Exterior Surface
- Aerodynamic Design and Numerical Simulation Analysis of a Passenger Car’s Defrosting Duct
- The Research of Impeller Used in Wave Energy Power Generate Equipment
- Free Torsional Vibration Characteristics of a Closed-Form Planetary Gear Set
- Experimental Study of Capillary Radiant Cooling System with Parameters Changing
- The Influence of Wheel Rotating to FSAE Racing Car Aerodynamic Characteristics
- Spectral Clustering Algorithm of Uncertain Objects
- An Improved Single-Phase Free-Surface Lattice Boltzmann Model with Surface Tension and Wall Adhesion
- The Fatigue Simulation Analysis of Customized Implanted Titanium Plate for Human Mandible Bone Reconstruction
- Influence Analysis of Blade Fracture on Hydrodynamic Performance of Ducted Propellers Based on CFD
- Experimental Study on the Durability Performance of PPS Filter Media
- Settlement Deformation Evaluation Method of High-Speed Railway Cutting under Rebound Effect
- Effect of Sample Size of Needle Felt on its Strength Measurement
- Effect of Bolt Hole Residual Stresses on Fatigue Performance of Truck Frame Rail Structures
- Study on the Temperature Field of U75V Rail in the Cooling Process Based on ANSYS
- Shaft Vibration Signal Denoising Based on Wavelet Analysis
- XFEM Based Analysis of the Crack Tip Stress Fields on a Three-Point Bending Specimen
- P-SS Algorithm for Solving the Eigenvalue Problem of Finite Element System
- Comparative Study of the Flow in a Differentially Heated Cavity Using Thermal Lattice Boltzmann Method
- Accuracy of Stress Analysis Using Numerical Integration of Elastic Half-Space
- Continuum Aeroelastic Model and Flutter Analysis for a Variable-Span Morphing Wing
- Meshing Method of Calculating Water-Entry Flow Field at High Speed
- Design Method of Dynamic Similarity of the Rotor-Bearing System
- Influence of Passive Joint Damping on Modal Space Decoupling for a Class of Symmetric Spatial Parallel Mechanisms
- Size Effect on Buckling Behaviors of Gradient Elastic Slender Columns
- A Comparison of Two Accelerated Degradation Models with Temperature and Humidity as Accelerating Stresses
- Research on Thermal Degradation Kinetics of Polyphenylene Sulfide Filter Media
- Sensitivity and Linearity Measuring of Micro-Gyroscope Based on Dynamic Analysis
- The Research on the Influences of Exhaust Noise and Engine Performances by Using Cracking Sound Attenuation Coupler
- Study on Viscoelastic Plastic Damage Model for Mica-Quartzose Schist
- Magnetism and Solid Coupling Vibration of Stator Double-Shell System of Asynchronous Machine
- Study and Simulation of Dead-Time Compensation for the Voltage Source SVPWM Inverter
- Existence of Solutions for Elliptic Equation with Critical Sobolev Exponent
- Design of Improved Disturbance Observer for Stabilized Platform Servo System
- Research of Socket Welds Vibration Fatigue Resistance and Application of Wavelet Transform Method in Damage Detection
- Reliability Study about the Approximation Methods of Censored Data in Fatigue
- Analysis of Non-Standard Gear Contact Fatigue Life
- Nonlinear Dynamic Analysis for the New Whole-Spacecraft Passive Vibration Isolator
- Study on the Influence of Gravity Factor on Parametric Resonance of Pipe Conveying Fluid
- Chapter 5: Materials Science and Technology, Material Manufacturing Processes
- A Precision CNC Turn-Mill Machining Center with Gear Hobbing Capability
- Improvement in Elastic Modulus of MWCNT/Epoxy Nanocomposites
- Research on Friction and Wear Behavior of Rubber in the Mixture of Crude Oil with Water
- Effect of (NaPO3)6 on Sea Water Corrosion Resistance of Micro-Arc Oxidation Ceramic Coatings Formed on Pure Aluminum
- Approach to Steel-Bamboo Composite Structure System
- The Analysis of the Experiment of Polarized Light in Uniaxial Dichroism Crystal
- Cloning and Expression of β-Glucosidase Gene from Bacillus pumilus
- The Application and Analysis of the Risk Assessment Model about BLEVE Accident
- Influence of Pattern Coating Thickness on Porosity and Mechanical Properties of Lost Foam Casting of Al-Si (LM6) Alloy
- Current Characteristics of AlGaN/AlN Ultraviolet Photodetector with Metal-Semiconductor-Metal Structure
- Study on the Mechanical Properties of ABS Enhanced by Magnesium Hydroxide Whiskers
- Research on Fine Particles Capture of Baghouse Filter Media
- Influence of Repeated Quenching-Tempering on Fisheye Cracks around Tin and Al2O3 Inclusions in SAE 52100 Steel
- Discrete Element Method Simulation of Residual Stresses in Grinding of Granite with Single Diamond Grain
- Characteristics of Stress Distribution of Micro-Cantilever of Polycrystalline Copper at the Pull-in Voltage
- The Effect of the Stirring with a Large Size of Stirrer on Formation of the Composite Joint Reinforced with SiC Particle
- Analysis of Application of New Photochromic Materials in Design of Kindergarten
- Reinforcement of Polypropylene Using Micro-Fillers
- Evaluation of Gamma Radiation on NR/PHBV Blends
- Effect of Lanthanum Nitrate on Titanium Alloys Ceramic Membrane Formed by Micro-Arc Oxidation
- Evaluation of Cadmium Contamination in the Sediments of Northern Kaohsiung Harbor, Taiwan
- Experiment Investigation on Two Filter Medias for Air Filtration
- Selective Glycine Polymorph Crystallization by Using Silver Nanoparticles
- Experimental Study of Bamboo Fiber Cushion Packaging Materials for the Express Packaging
- Polypyrrole Actuator Operating Characteristicsin Electrolyte Solution Mixed with Methanol
- Electroosmotic Flow Pump on Transparent Polyimide Substrate Fabricated Using Hot Embossing
- Improved Performances of All-Polyimide Fluidic Devices Using Thermal Nanoimprinting
- Valveless Micropumps with Dual Polyimide Diaphragms
- Fabrication of Au Micro-Electrodes on Polyimide Films Using Transfer Printing Techniques
- Single-Ball Rolling Contact Fatigue of 13Cr-2Ni-2Mo Stainless Steels Quenched by Induction Heating Method
- Experimental Study on the Fatigue Properties and Reliability for the Steel of Elastic Oil Sump
- Evaluation of the Status of Copper Contamination of Surface Sediments of Jen-Gen River Estuary, Taiwan
- Ordered Melanin Film Fabricated by the Self-Assembly Technique
- An Interpolation Algorithm Based on S-Curve Feedrate Profile and Look-Ahead Function
- Research on Compensation Method of Coupled Error in High-Precision Micro-Machining Process
- Chapter 6: Control System Modeling and Applications
- An Intelligent Cruise Controller for High-Speed Train Operation Based on Fuzzy Neural Network Theory
- Adaptive Backstepping Stopping Control of Urban Rail Vehicle
- A Digital Peak Current-Mode Control PFC with Bifurcation Control
- Robust Control Design and Analysis Using SCILAB
- Spacecraft Attitude Tracking Using Second-Order Sliding Mode Control via Backstepping
- Quasi-Sliding Mode Control for Impulsive Delayed Vehicle Longitudinal Following System with Bounded and Varying Parameters
- Design and Implementation of Adaptive Fuzzy Cerebellar Model Articulation Controller for Direct Torque Control System
- Physical Modeling of Magneto Hydrodynamic Explosive Munition and Detonation Control
- Multidisciplinary Design Optimization of a High-Flow Control Valve
- Research on Hydraulic Pitch-Control System of Wind Turbine
- Design of Five Axis Cooperation Machine Based on Motion Control Board
- Design on the Bearing Forging Spray Cooling Control Device
- A Touch-Based Wheelchair Control Interface: Concept and Implementation
- Study on Predictive Control Technology Based on Disturbance of Electrically Heated Boiler
- Precise Angle Control of Electromechanical Actuator with Fuzzy PID and Genetic Algorithm
- Design and Simulation of Fuzzy-PID Vector Control System Based on Mine Hoist
- The Speed Control of Immune-Fuzzy Sliding Mode Controller for a Synchronous Reluctance Motor
- Engineering Objective Controls Knowledge Driven Product Definition in Industrial Product Development
- Research on Improvement Algorithm of Model Free Learning Adaptive Controller
- Robust Fixed Point Transformations in the Model Reference Adaptive Control of a Three DoF Aeroelastic Wing
- Research on Modeling and Control Characteristics for Electric Power Steering System of Logistics Machine
- Stationary Response of Duffing-van der Pol Oscillator with Delayed Feedback Control under Wide-Band Noise Excitation
- Driving Performance Advancement for SRM Using a Novel Adaptive Learning Control on Dominant Parameters
- Application of DEA-DA Model and Method on Quality Control in Production Process
- PID Neural Network Smith Predictive Control for a Control System with Time Delay
- An EEG Based Control System for Intelligent Wheelchair
- The Research of Digital Display Pump Test Stand Based on IPC
- Adaptive Controller Designed for High-Speed Train ATO System with Nonlinear and Uncertain Resistance
- Intelligent Power Management of Electric Vehicle with Li-Ion Battery
- Robust Controller of Self-Powered Vehicle Active Suspension Based on LMI Design
- Influence of Parameters in Coupled Adaptive Self-Organizing Sliding-Mode Fuzzy Controller Using Volumetric Type Bending Machine
- Hybrid Projective Synchronization for the Fractional-Order Chen-Lee System and its Circuit Realization
- Control Platform for Tubular Permanent-Magnet Linear Synchronous Motor
- New Planning of Pipe Cooling in Temperature Control for Mass Concrete
- Robust Backstepping Control for Longitudinal Flight Dynamics
- Iterative Adaptive Control of a Three Degrees-of-Freedom Aeroelastic Wing Model
- A Kind of Design for Intelligent Photoelectric Tracing Trolley
- LABTM Control System Based on FPGA
- Receding Horizon Control on Automatic Landing Lateral Loop of Carrier-Based Aircraft
- Research on Data Reports Based on Experimentation & Test of Traffic Engineering
- Chapter 7: Developments in Medical Technologies and Images Processing Technologies
- The Effects of Production Performance Model and Competitive Environment of Hospital Systems
- The Viscoelasticity of Intestines by Dynamical Mechanical Analysis
- Development of a CCD-Based Optical Computed Tomography Scanner Used in 3D Gel Dosimetry
- Finite Deformation Analysis and Numerical Simulation of Arterial Wall
- The Research of Applying Parallel Streaming Technology on Developing Cloud Computing Platform for Delivering Medical Images
- The Illumination of a Electrical Non-Fiberoptic Endoscope of Surgery
- Cell Separation Through Ascending and Descending Curvilinear Microchannels
- The Influence of Suture Density on Bioprosthetic Heart Valve
- Computer Simulation for New Theoretical Model Constructed with Tuberculosis
- Color Image Enhancement Methods Based on Matlab
- Design and Implementation of Seismic Data Digital Filter
- Realization of Car’s Frontal Projected Area Based on OpenCV
- Audio-Video Synchronization Method Based on Playback Time
- Comparative Analysis of Image Measurement Accuracy in High Temperature Based on Visible and Infrared Vision
Les mer
Produktdetaljer
ISBN
9783037856512
Publisert
2013-05-03
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
3300 gr
Høyde
240 mm
Bredde
170 mm
Dybde
90 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1800