Produktdetaljer
ISBN
9783038354109
Publisert
2015-04-23
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1940 gr
Høyde
240 mm
Bredde
170 mm
Dybde
54 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1070
Redaktør
Collection of selected, peer reviewed papers from the 3rd International Conference on Mechanical, Information and Industrial Engineering, November 21-22, 2014, Weihai, China.
The 219 papers are grouped as follows:
Chapter 1: Materials Science and Processing Technologies;
Chapter 2: General Mechanical Engineering, Applied Mechanics and Dynamics;
Chapter 3: Mechatronics, Robotics and Vehicle Engineering;
Chapter 4: Control Technologies, Automation, Design and Simulation of Manufacturing;
Chapter 5: Electrical Engineering and Electric Power Machines;
Chapter 6: Power System and Energy Engineering, its Applications;
Chapter 7: Electronics and Integrated Circuits, Embedded Technology and Applications;
Chapter 8: Measurements, Testing, Monitoring, Identification and Detection, Analysis and Methodology;
Chapter 9: Signal and Image, Video Processing, Data Mining and Acquisition, Computational Mathematics and Algorithms;
Chapter 10: Communication, Networks and Information Technologies;
Chapter 11: Traffic, Transportation and Logistics; Chapter 12: Product Design, Planning, Projects Management and Industrial Engineering.
Les mer
<p>Selected, peer reviewed papers from the 3rd International Conference on Mechanical, Information and Industrial Engineering, November 21-22, 2014, Weihai, China</p>
- Preface, Committees and Sponsors
- Chapter 1: Materials Science and Processing Technologies
- KNN-BF Lead-Free Piezoelectric Ceramics Synthesized by Sol-Gel Method
- Preparation Process of KNN-0.008BF Lead-Free Piezoelectric Ceramics
- Research on Expanded Graphite/Nitrate High-Temperature Composite Phase Change Materials
- Study on Properties of EPS Insulation Mortar
- The Performance of Cement-Based Self-Leveling Mortars Affected by Mineral Admixtures
- Morphology Evolution and Mechanical Properties of HNBR Composites Reinforced by HZMMA/Carbon Black during Curing Process
- Dielectric Properties of Mn, Co, and Ni-Doped LaSrFeO3 Films with Different Annealing Atmosphere
- Effect of Grain Size on Erosion Wear of B4C/TiC/Al2O3 Ceramic Nozzles
- Effect of Heat Treatment on Microstructure and Mechanical Properties of Cr31 Hypereutectic Cast Iron
- Influence of Polymer on Properties of Sulphoaluminate Cement Waterproof Mortar
- Study on the Performance on Some Admixture of Sulphoaluminate Cement Waterproof Mortar
- Synthesis of Lignin-Based Epoxy Resin in Ionic Liquid [BMIm]Cl
- FE Modeling of the Inertia Friction Welding with a Modified Friction Law
- Simulation of Mass Transfer in Anode Flow Field of a Passive Direct Methanol Fuel Cell
- Chapter 2: General Mechanical Engineering, Applied Mechanics and Dynamics
- Analysis and Calculation of a Gravity Turbine Torque, Speed
- Contact between Logarithmic Crowned Teeth of Spur Gear Transmission
- Remanufacturing Technology in Application of Imported Electro-Discharge Texturing Roll Machine
- Design and Simulation of Hybrid Braking System Collaborative ABS
- Application on Programming and Simulation of the Fan Blade NC Machining Based on UG
- Design and Implementation of Measurement Instrument for Non-Cylinder Pinhole of Piston
- Design of Spindle Dynamic Balancing Basing on Discal Work
- Design Optimization of Opposite Tape-Spring Flexure Hinges
- Finite Element Analysis of Large Mining Height Hydraulic Support Top Beam
- Finite Element Analysis of the Car Steering Knuckle Based on ANSYS
- Modal Analysis of Axial Vibration of Long Pipeline Delivering Coal Slime in Power Plant
- Numerical Analysis of Tension Force Subjected by Flexible Mattress
- Prediction of Machine Tool Thermal Error Compensation Based on SVMR and ARM11
- Research on Opening Holes in Cylindrical Shell Based on ANSYS Simulation
- Structure and Fluid Dynamic Characteristics Analysis of Enclosed Nuclear Electric Valve
- Study of the Vibratory Stress Relief for Large-Scale Parallel Welded Steel Truss
- The Finite Element Analysis of the Floor Damper of High Speed Train
- Study on Optimizing the Parameters of Floor Absorber of High Speed Train Floor
- Thinking about the Calculating Formula of Degree of Freedom of Plane Mechanism
- Algorithm of Transition Curve of Shaped Piston Cylindrical Cross Section
- Chapter 3: Mechatronics, Robotics and Vehicle Engineering
- Design and Implementation of ZigBee Based Wireless Sensor and Actuator Networks in Service Robot Intelligent Space
- Fast Communication and Efficient Architecture of Intelligent Vehicle
- The Structure Design of Gait Pole Climbing Robot
- The Control Strategy of Yaw Moment for Rear Electric Motor Drive Vehicle
- A Control Strategy of Regenerative Braking System with Motor ABS for In-Wheel-Motor Vehicle
- A New Approach for 3D Environment Measurement in Mobile Robot Applications
- Hierarchical Control Algorithm for Stability Enhancement of 4WD Electric Vehicle with In-Wheel Motors
- Research on Electro-Mechanical Braking System Control of EV Based on Maximum Energy Recovery Strategy
- Simulation and Validation about Control Strategy to Improve Fuel Consumption for an Extended Range Electric Vehicle
- Stability Control of 4WD Electric Vehicle with In-Wheel Motors Based on Integrated Control of Electro-Mechanical Braking System
- An Optimization Method for Solution Selection Based on the Inverse Kinematics Problem of a Mechanical Arm
- Research on the Impact of DPF Resistance Characteristics on Diesel Performance
- Chapter 4: Control Technologies, Automation, Design and Simulation of Manufacturing
- PID Temperature Control Systems of Greenhouse Based on FSM Methodology
- Sensor-Based Filtering of Stochastic Distributed Parameter Systems
- Delay-Dependent Criteria for Absolute Stability of Time-Varying Delay Lurie Control Systems
- Synchronization of Memristor-Based Competitive Neural Networks with Different Time Scales
- A Novel Electromagnetic Navigation Control Approach of Intelligent Car
- An Improved Multi-Level Adaptive Control Algorithm Based on Parameters Self-Tuning for a Class of SISO Nonlinear Systems
- Design of Extended-Range Electric Vehicle Integrated Control System Based on Rapid Prototype Technology
- Fuzzy Observer Design for a Class of Uncertain Nonlinear System
- Improvement Strategy of Load Regulation of Boosting Power Supply Based on PID Algorithm
- Research on Automatic Control Technology of Tobacco Manufacturing Process Based on IDEF Method
- Research on High Precision Temperature Control System of Strap-Down North-Seeking
- Sliding Mode Control for Discrete Uncertain System with Time Delay
- Sliding Mode Control for Uncertain Markov Switched Systems
- The Design of the Loss-in-Weight Weighing Controller
- The PID Flow Control System Based on PLC
- 6-DOF Virtual Flight Control Simulation of Wire-Driven Parallel Manipulator
- A Simplified CNC System Based on PLC and Position Controller
- Fault Diagnosis for Level Control System Based on SPC
- An Intelligent Household Electricity Load Control Method Based on Demand Response
- Application of SIEMENS Software Redundancy in Hazard-Free Household Disposal System
- Chapter 5: Electrical Engineering and Electric Power Machines
- A New Sliding-Mode Observer for Sensorless Control of Permanent Magnet Synchronous Motor
- A Novel Method for Modeling and Simulation of BLDCM Based on Modular Design
- A Multi-Objective Assessment for Primary Frequency of Generator
- Implementation of DSP Based on Vector Control Model of AC Excitation Control System for a New Hybrid Excitation Synchronous Generator
- Modified Power Compensation Control Strategy of Three-Phase Grid-Connected Inverter under Unbalanced Grid Voltage Conditions
- Research on the Large Disturbance Characteristics of the Pumped Storage Motor with the Time-Stepping FEM Consequently
- Space Vector Control of Permanent Magnet Synchronous Motor Based on 60o Coordinate System
- The Analytical Simulation of Squirrel Cage Induction Generator-Rectifier System Based on SPWM
- The Applications of Real-Time Data Mining Technology in Fault Prediction of Power Plant Generator
- The Control System for Three-Phase Induction Motors Based on Stator Flux Orientation
- The Research on Main Circuit Parameters and its Control Law of TCR Single-Phase to Three-Phase Power Converter
- Thermal Overload Protection for AC Asynchronous Motor Based on Complex Morlet Wavelet
- Load Identification Modeling with Improved Model Structure
- Chapter 6: Power System and Energy Engineering, its Applications
- Research and Development of FPGA Solar MPPT Algorithm
- The Research of Multi-Wave Impedance Model Based on Different Tower Structures
- An Improved L Index for the Static Voltage Stability Assessment of Power System with ZIP Loads
- Available Transmission Capacity Analysis for the Receiving-End Grid of UHV-DC Transmission System
- Research on Transient Stability of Wind Farms Based on Coordinated System of SVS and STATCOM
- A Novel Reactive Power Compensation Approach Based on Particle Swarm Optimization
- Calculation of Capacitance Variation in Corona Cage
- Common Models Comparison and Conversion between PSASP and PSS/E
- Dynamic Load Model Parameter Identification Based on Genetic Simulated Annealing Hybrid Algorithm
- Grading Ring Parameters' Design for Y-Type Insulator String of 1000kV AC Double-Circuit Transmission Line
- Matpower CPF Program Improvement and Steady-State Voltage Stability Analysis
- Probabilistic Interval Prediction of Wind Power
- Research on Black-Start of Optimal Operation of Hydropower, Wind Power, Energy Storage in Regional Grid
- Research on Fast Decoupled Load Flow Method of Power System
- Research on Switching Technology of Aviation 270V DC System
- Security Mechanism of Distribution Automation System Based on ECC
- Study on Improving Consumption Capability of Wind Power by Installing Thermal Storage in Ningxia Province
- Study on the Line Overload Harmonization and Optimization Control
- Study on Thermal Storage Device Model and Control Strategy for Cogeneration and Wind Power Heating System
- Fault Diagnosis Simulation of Light High Voltage Direct Current Transmission System
- Voltage Sag Detection Method Based on Wavelet Information
- PEMFC Parameter Simulation Based on MATLAB/SIMULINK
- Research of PWM Rectifier System Based on Infineon XMC4500
- Chapter 7: Electronics and Integrated Circuits, Embedded Technology and Applications
- Design of Global Positioning System Based on Single Chip Computer
- A Single-Phase AC/DC Conversion Circuit with APFC
- Hysteretic Control Technology in New Flexible HVDC
- On the Research of Identification Methods for Supercapacitor Model Parameters
- Study on a New Type of HVDC Flexible Digital Pulse Width Modulated Carrier Frequency Selection
- Design of Frequency Selection Circuit of Advanced Detector Receiving Device in Coal Mine Roadway
- Study and Design of the Control System for Crop Growth Cabinet
- Chapter 8: Measurements, Testing, Monitoring, Identification and Detection, Analysis and Methodology
- Aerial Robot-Based System for Monitoring Environmental Nuclear Radiation
- An Integrated Fault Diagnosis Method Based on the ICA-SVM
- Dynamic Modeling and Calibration of the Acceleration Sensor Based on System Identification Theory
- A Study of 3d Coordinate Measuring Based on Binocular Stereo Vision
- Headlight Detection and Error Correction of Measurement Data
- Measuring Method on the Relative Position between the Rack and the Missile with T-Drawbar
- Review of Vision Inspection Technology for Surface Defect of Steel Bar
- Study on Data Fusion Algorithms of Hot-Pressing Measurement Process of Wood-Based Panels
- Study on Examination Method of Striation Marks Based on Fractal Theory
- Exciting Force Source Identification Technology for Underwater Elastic Structure by MFP
- An Improved l1 Tracker for Transportation Vehicle Tracking
- Development of New Temperature Sensing Cable and Wireless Data Acquisition System
- Identification Methods of Modified Prandtl-Ishlinskii Model for Giant Magnetostrictive Actuator
- Chapter 9: Signal and Image, Video Processing, Data Mining and Acquisition, Computational Mathematics and Algorithms
- The Research of Video Quality Evaluating Based on MATLAB
- Binarization Segmentation Based on Fuzzy Clustering Theory
- A New Real-Time Video Watermarking Scheme Based on Mutative Area
- Face Classification and Recognition Based on Contour and Local Texture Feature
- The Study of Kalman Filtering Algorithm in the Initial Alignment of Strapdown Inertial Navigation System
- Coke Rate Prediction Model Based on Genetic Algorithm Optimized Support Vector Machine
- UV Signal Detection and Analysis of China Bank Check
- An Image Segmentation Algorithm Based on Watershed Transform
- An Overview and Analysis of Electronic Stabilization for Cameras on Moving Vehicles
- Approximate Merging of Two Adjacent B-Spline Surfaces Using Least Square Approximation
- Brief Survey of K-Means Clustering Algorithms
- B-Spline Surface Reconstruction from Cloudy Data Using Weighted Least Square Fitting
- Cataclysmic Variable Star Spectra Data Mining Engineering in SDSS Archive
- Combination of SVD and Wavelet Transform for Oil Discrimination on 3-D Fluorescence Spectra
- Comparison and Improvements of Image Denoising Based on Wavelet Transform
- Endada: An Efficient Network Design Algorithm Based on Weighted Graph for Data Aggregation in Internet of Things on Marine Ships
- Fast Text Processing for Interlaced Sports or News Videos
- Flower Bud Detection Based on Saliency Map and SURF Feature-Points
- Image Acquisition and Processing for Laser Autocollimator
- Impact Localization System by Using FBG Sensors and Extreme Learning Machine Algorithm
- Multi-Object Tracking with Single Camera
- Numerical Investigation of Nonlinear Filtration Problems of High-Viscosity Fluids in Porous Media
- Recognition of Working Condition in Cement Rotary Kiln Based on Generalized Dimensions
- Research and Realization on Image Preprocessing Technology Based on Improved Median Filter
- Research of the PCB Quality Detection for IC Mount Base on the Digital Image Recognition
- Research on the Anti-Collision Techniques of Radio Frequency Network of Pasture
- Research on the Technique of Blind Recognition for Convolutional Code
- Study of Particle Swarm Inertia Weight Adjustment Method Based on Fitness Changes after Multi-Step Iteration
- Study on Matching of Image Topology Structure and Application
- Textile Processing Anomaly Detection Based on Time Domain Features and GA-SVM
- The Dynamic Multi-Angle Video Capture System Study Based on Glass-Free 3D
- The Technology of Digital Image Hiding Based on Discrete Wavelet Transform
- Design of Soil-Granularity Analysis System Based on MATLAB
- Testing System Reliability with Exponential Distribution Testing System Reliability
- 4D Approaching Trajectory Design in Terminal Area Based on Radar Data
- The Application of Multi-Hypothesis Targets Algorithm in Track Association
- Method of Suppressing Noise AM Jamming with EMD for Combined Modulation Radio Ranging System
- Studies to Determine the Wind Profile Radar SNR Threshold Method
- Study of Flexible Waterproof Layer Thickness Measuring Based on B-Mode Ultrasound Image
- The Solutions for a Kind of Engineering Equation
- Chapter 10: Communication, Networks and Information Technologies
- A Method of Indoor Localization Based on BLE4.0 Protocol of Using Beacons
- An Inclusion Measure between Fuzzy Sets
- Manufacturing Cloud Service Model Based on Adaptive Mechanism
- A Load-Balanced Coding-Aware Multicast Routing in Cognitive Wireless Mesh Networks
- Customizing Dynamic Libraries of Qt Based on the Embedded Linux
- A Kind of Fuzzy Set for Rough Fuzzy Sorting Method
- Application Study of Efficient Modulation Technique to DVB-RCS Based Aeronautical Satellite High Data Rates Transmission System
- Control Model of Software Engineering Risk Based on Hidden Markov Model
- Design of Task Workflow Based on Activiti Technology
- Incentive Mechanism Research for Media Streaming Base on Social Norms and Taxation Mechanism
- RETRACTED: SQL Injection-Database Attack Revolution and Prevention
- Instant Communication Method of Design and Development Based on Local Area Network in Linux
- Reconfigurable Antenna Beamforming in Device to Device Communication
- A Localization Algorithm for Wireless Sensor Network Based on the Weighted Correction in Geometric Measurement
- An Adapted Intra and Inter Prediction Algorithm for H.264
- Integrating Cloud Computing and IoT for Community Health Service
- Modeling for Reputation Computing Research Base on C2C Communities
- Research of Energy Optimization Strategy for WSN
- Research on Design and Implementation of Automotive ECUs Software Remote Update
- The Design of High Speed LVDS Parallel Port Communication Protocol
- Three-Party Simultaneous Quantum Secure Communication with Unidirectional Qubit Transmission
- Timeslot Management’s Design and Implementation of AIS Terminal Equipment
- Topic Detection Research Based on Multi-Models
- Sunlight Greenhouse Temperature Prediction Model Based on Bayesian Regularization BP Neural Network
- Detecting and Normalizing Formulas in Electronic Literature Resources
- Detecting Multi-Scale Community Structure in Complex Networks
- Security Analysis of Two Chaotic Maps-Based Authentication Scheme
- A Combined Method for Spatial Join Selectivity Estimation
- Chapter 11: Traffic, Transportation and Logistics
- Traffic Accident Analysis of Novice Drivers
- Urban Transport GSPN Model of Cyber-Physical Systems
- Military Logistics and Transport Model Design Based on Maritime Engineering
- Research on Analysis and Algorithm of Freeway Network
- A Conflict Detection Method for Runway Incursion
- Coal Transportation Network Optimization Model Based on Power Source Distribution
- Analysis on the Development of China’s Environmental Logistics
- Chapter 12: Product Design, Planning, Projects Management and Industrial Engineering
- The Engineering Application of Improved Alternating Direction Method for Solving Power Systems Multi-Area Dispatch Problem
- Resource Selection Method Process Based on Mechanisms of Tax in Grid Dependent Tasks Rescheduling
- Application of Modeling and Simulation Based on Agent
- Investment Benefit Evaluation of China Grid Communication Resources Based on DEA and Grey Relational Analysis
- The Application of Random Forest in Finance
- Design and Application of the Similarity Measure Simulation Applied in Project Portfolio Allocating
- A CPN Based Model for a Typical Product Development Process
- Assessment of Investment Capacity of Power Companies Based on TOPSIS Method
- Empirical Study on Intelligent Systems Coordination – A Case Study of Intelligent Tourism
- Financial Management Risk Identification and Measurement in UHV Project
- Research on Integrated Management and Distribution Based on GIS Business Information Platform
- Research on the Conceptual Modeling Frame of Mission Reliability of Materiel System Based on Agent Simulation
- Research on the Development Strategies of New Energy Automotive Industry Based on Car Charging Stations
- Study on the Algorithm of Electricity Coal Inventory Based on the Balance of Power Supply and Demand
- The Study of Household Electricity Planning Based on User Behavior
- Design and Realization of the Reconfigurable Functional Unit Adaptive to General Spacecraft
- Research on the Resource Scheduling in Emergency Response Based on ACA
- Application of AHP Method in Hydraulic Engineering
- The Establishment of IOT Based System in Conservation and Utilization of Mogao Grottoes
- Discussion and Analysis on Electric Energy
- Order Parameters and Operation Modeling of Modularity Logistics Systems
- Integrated Water Resources Management (IWRM) in the Yellow River Basin
Les mer
Produktdetaljer
ISBN
9783038354109
Publisert
2015-04-23
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1940 gr
Høyde
240 mm
Bredde
170 mm
Dybde
54 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1070
Redaktør