International Russian Conference on Materials Science and Metallurgical Technology (RusMetalCon 2018)

Selected, peer reviewed papers from the International Russian Conference on Materials Science and Metallurgical Technology (RusMetalCon 2018), October 1-4, 2018, Chelyabinsk, Russian Federation

• Preface
• Chapter 1: Synthesis, Processing and Characterization of Materials
• Effect of Micro-Alloying with Boron and Niobium on Properties of Cr-Mn-Mo Steels
• Analysis of Thermal Stresses in Layered Composite AD1 + Cr20Ni80 + M1 after Heat Treatment
• Effect of Explosive Processing on the Structure and Properties of Polyarylate
• Destruction Patterns of X70 Steel Sample, Possessing Cracks of Corrosion-Mechanical Origin, under Cyclic Loading
• The Usage of Hydroextrusion for Plastic Deformation of Magnetostrictive Iron-Gallium Alloys
• Analysis of the External Conditions Affecting on the Cavitation Resistance of a Steel
• Improving the Durability of Machine Parts Using a Combined Method
• Determination of Polymorphic Transformation Temperature for Alloy VT8
• Medium-Carbon Free-Cutting Steel
• SiAlON-TiN Ceramic Composites by Electric Current Assisted Sintering
• Improving Strength of Structural Steels by Preheating in an Oxygen-Containing Medium
• Structural Transformations Influence on Mechanical-and-Physical and Chemical Properties of Fe-Cr-Co Alloys in Heating
• Shot Blasting of the Cemented Gear Parts
• Corrosion Resistance of Medical Stainless Steel Obtained by Non-Vacuum Electron Beam Cladding
• Methodology and Installation of the Etching of the Surface Layer from Pipes, Rods and Profiles for the Aim of the Analysis of Residual Stresses
• Porous Material Production and Material Properties
• Structure and Characteristics of the Metal of the Cr-Ni-Mo-Mn-Si-Ti-Nb System Obtained by Surfacing with a Flux-Cored Wire Alloyed by Boron Carbide
• Technology and Properties of Composite Materials with Modifier of Chloride Aluminum
• Research of Polyethylene in Products of Autocomponents
• Nanostructured Yttrium Oxide Obtained by Hydrolysis of Yttrium Sulfate
• Modeling and Calculation of Thermochemical Characteristics of Crystalline Vanadium Oxides under Standard Conditions
• Effect of Cerium and Lanthanum Additives on the Phase Composition of the Copper-Nickel Alloys
• Measurement of Complex Dielectric Permittivity of Quartz Systems
• Investigation of NiO-Al₂O₃-SiO₂ Properties via XRD, FTIR Techniques and Thermal Analysis
• The Structure of Multi-Layer Composite Material Obtained by the Method of Diffusion Welding
• Features of the Formation of Structure and Phases in Single-Crystal High-Temperature Alloys and their Effect on Mechanical Properties
• Influence of pH and Synthesis Duration on the Composition and Thermal Behavior of Hydrolysis Products of Lanthanum Nitrate
• Optimization of the Composition and Structure of Deformable Heat Resistant Aluminum Alloy
• Thermodynamic Modeling of the Processes of Interaction of Calcium, Magnesium, Aluminum and Boron with Oxygen in Metallic Melts
• Ceramic Proppants Based on Ultrabasic Rocks of Kazakhstan Chromite Ore Deposits
• Assessment of the Structural State of the Amorphous Alloys Thin Surface Layers
• Doping Titanium Dioxide by Fluoride Ion
• The Poly-Substituted M-Type Hexaferrite Crystals Growth
• Investigation of Physical and Chemical Processes of Formation of Composite Materials with Specified Structural Phase Characteristics
• Features of Technological Materials Application in Thermal Manufacturing
• Ni-Fe Alloys as Perspective Materials for Highly Efficient Magnetostatic Shielding
• Austenite to Ferrite Transformation Kinetics in Fe-9 %Cr Alloys - I. General Kinetic Analysis
• Methods for Improving the Efficiency of Steel Modifying
• Influence of the Glassfiber Filaments Distribution on Quality and Performance of Hole Processing on Printboards
• Influence of Surface Energy on Ni-Fe Thin Films Formation Process
• Template Assisted Ni Nanowires Fabrication
• Peculiarities of Microstructure Changing on Outer Surface of Carbon Steel Wire at Combined Deformational Processing by Drawing with Torsion
• Reasons for Breakage of Welding Rod and Wire
• Investigation of Grain Anisotropy on Surface Area between Carbon Steel Wire and Die at Drawing
• Solution to Technological Problems of Raising the Reliability and Quality of Castings Based on Titanium Alloys
• Components of the GdOCl - GdCl₃ • 6H₂O System Identification and Determination by the Raman Spectroscopy
• On-Line Registration of Damages in Composite Materials with Fiber-Optic Acoustic Emission Sensors
• Experimental Study of Strain-Softening Stage in Materials
• Differential Thermal Analysis of Complex Alloyed Brass
• Characterization of Ti-xNb (x = 25 – 35) Alloys in as Melt and Annealed States
• Particle Size Distribution and Structural State Analysis of Mechanically Milled Strontium Hexaferrite
• Influence of Thermal Exposure on the Structure and Phase Composition of Aluminized Layer Obtained by Explosion Welding and Hot-Dipping Process
• Features of Martensitic Transformation in Steel during Quenching in a Constant Magnetic Field
• Effect of the Quenching Temperature on the Phase Composition and Youngʹs Modulus of Corrosion-Resistant and Biocompatible Titanium Alloys
• Change of a State of the Optical Parts Surfaces made of K8 Glass after Polishing Completion
• Efficiency of Thermocycling Treatment Application for Hardening Casing Pipes from Steel 09G2S to Strength Group Q125
• Experimental Studies of Wear Resistance of Anti-Friction Coatings of Bimetal Fluid-Film Bearings
• Regression Model of TCLE of Low Melting Glass of System MgSO₄-KPO₃-Na₂B₄O₇
• Powder Diffraction and Dilatometric Study of SrFe₁₂O₁₉
• Hardenability of Medium Carbon Cr-Mn-Mo Alloyed Steels
• Numerical and Experimental Investigation of the Heat Treated Steel Part Microstructure and Hardness
• Ball-Milling Stimulated Mechanochemical Processes in the System “Titanium-Toluene”
• Effect of Mesostructural Elements on Radiation-Induced Porosity in 16Cr-19Ni-2Mo-2Mn-Nb-Ti-V-P-B Austenitic Steel
• Development of Capillary Tube Production Technology
• Effect of Grain Boundaries Type on Carbides Precipitates in Tempered Martensite
• Effect of Boron on the Microstructure and Mechanical Properties of Low-Carbon Tube Steel
• Improving the Strength of Abrasive Wheels and Optimizing the Control over the Strength of Composite Abrasive Materials
• Chapter 2: Technologies of Pyrometallurgical Processes
• Technology and Equipment for Plasma Electric Arc Granulation of Fused Welding Flux
• The Analysis of the Influence of Manufacturing Practice of Anode Paste on its Consumption
• Promising Directions for the Stabilization of Ferroalloy Production Slags
• The Time and Heat Dependence of the Nitrogen Distribution upon Steel Alloying with Nitrided Manganese
• Modeling of Material and Heat Balance of Ferromanganese Blast Furnace Smelting Using Computer Environment Lazarus
• Non-Equilibrium Crystallization of a Eutectic Alloy - Mathematical Model
• Тhe Study of the Process of Metal-Thermal Reduction of Boron from the Slag of the System CaO-SiO₂-MgO-Al₂O₃-B₂O₃
• New Possibilities of ESR for Modern Machine Engineering
• Iron Oxidation State Analysis in ESR Slag
• Efficiency of Application of Evaporative Cooling of Graphite Electrodes to Reduce their Consumption in Arc Furnaces
• Development of the Process for Obtaining Iron-Ore Pellets with Required Metallurgical Properties
• Kinetics of Siderite Ore Roasting in the Shaft Furnace
• Research on the Thermal Work of the Drum-Type Chamber Furnace with a Constant Temperature of the Working Space
• Study on Thermal Operation and Design of Ring Furnace of the Pipe Rolling Plant
• Zinc Ferrite Decomposition by Sodium Carbonate and Calcium Oxide at Roasting of Steelmaking Dust
• Development Features of Thermal and Gas-Dynamic Performance of Mineral Wool Cupola Furnace
• Particular Oxydation Features of Various Mechanical Strength Cokes
• Fundamental Research as a Basis for the Creation of New Technologies in Steel Ladle Metallurgy
• Improvement of Agglomeration Technology by a Sinter Mix Preheating
• Direct Reduction of Iron from Crystal Lattice of a Complex Oxide
• Solid-Phase Reduction of Iron from Suroyam Titanomagnetite Ore during Metallization in Rotary Kiln
• Mathematical Model of the Reduction of Metals from Complex Polymetallic Types of Ore Applicable to the Electron Mechanism
• Metallographic Estimation of the Number of Forming Metallic Particles Obtained during Direct and Indirect Reduction of Metals from Complex Oxides
• Survey of Methods of Refining Catalysts for the Extraction of Platinum Group Metals
• Chapter 3: Technologies of Hydrometallurgical Processes
• Hydrochemical Investigation of Dissolving Sulfide Gold-Bearing Raw Material of Uderey Deposit
• Nitric Acid Treatment of Olympiada Deposit Refractory Gold-Bearing Concentrate
• Studying Kinetics of Arsenic Recovery from Copper Dross by Alkaline Sulfide Leaching
• Study of Influence of Parameters of Leaching Fluorine from Spent Pot Lining
• Choice of Efficient Technology for Aged Enrichment Tailings Processing
• The Ways of Development of Combined Hydrometallurgical Technology for Processing of Complex Ores’ Beneficiation Tailings
• Complete Processing of the High-Iron Content Red Mud
• Quality Increase in the Gold-Containing Cathode Sediment
• Complex Rare Earth Minerals Sulfate Decomposition Techniques Investigation
• Theory of Copper-Electrolyte Slimes Decoppering in the Presence of Hydrogen Peroxide
• Leaching of Non-Ferrous Metals from Galvanic Sludges
• Improvement of Stirred Tank for Aluminum Hydroxide Seeded Precipitation
• Application of Inorganic Fe(III)-Based Sorbent for Arsenic Sorption
• Investigating of a Low-Grade Copper Concentrate Desilication by Alkali Pressure Leaching
• Copper Smelting Fine Dust Autoclave Leaching
• Sorption and Membrane Technologies for Mine Water Purification
• Chapter 4: Modern Problems of Foundry Production
• To the Question of Casting Alloys of Non-Ferrous Metals in the Metal Mold
• Prospects of Using Titanium Dioxide as a Component of Modifying Composition for Aluminum Casting Alloys
• Position Control and Alignment of the CCM Equipment
• Perspective Methods of Graphite Quality Improving
• Physical Methods of Melt Processing at Production of Aluminum Alloys and Composites: Opportunities and Prospects of Application
• Forecasting the Structure and the Hindered Contraction of Casts by Using the ProCAST System of Engineering Analysis
• Nanostructured Materials in Preparation Casting Alloys
• Acceleration of the Formation on the Sodium Silicate Binder in Investment Casting
• Evaluating Heat Resistance of Mold Shells in Investment Casting
• Application of Numerical Model of Continuous Cast Bloom Crystallization to Improve the Efficiency of Mechanical Soft Reduction Technology
• An Experience of a Liquid Glass Mixture Using for AlpHaset Process in Russia
• Specialty of Сarbon-Carbid-Silicic Mixture Using (UKKS) as Substitute of Re-Carburizing Agent and Ferrosilicon for Grey Iron Melting
• Model for Solidification of the Working Layer of the Roll in the Chill of the Centrifugal Machine
• Influence of the Intensity of Electromagnetic Mixing in Continuous Casting Machine Crystallizer on the Formation of Grade Blanks
• Chapter 5: Technologies of Metal Forming Processes
• Investigation of the Flanging Process for the Parts with High Conical Angles
• Procedure for Evaluating Competitiveness of Production Processes
• Elastohydrodynamic Friction Mode as a Method of Surface Finishing Excluding Burnishing
• Fuel Pipes Coil Drawing Line Production for Diesel Engines
• Surface Pressure Treatment of Titanium Alloy Bars by Transverse Rolling
• Development and Research of the Billet Forging Technology in the Newly Designed Step-Wedge Dies
• Development and Application of Tube End Forming Process with Combined Swaging and Local Differential Pre-Heating
• Generalized Model of Section Two-Roll Rolling - Geometry of the Zone of Deformation
• Stress-Strain State of a Plastic Layer under Compression by Two Rigid Parallel Rough Plates
• Numerical Analysis and Simulation of the Straightening Process of Heavy Rails on a Horizontal Roller-Straightening Machine
• Development of a Method of Forging Long-Length Blanks with Intensification of Shear Deformation
• Study of the Tubular Billets Geometric Characteristics during Computer Simulation of the Rotary Piercing Process
• Development and Optimization of Flat Products Manufacturing at Rolling Mill 3200
• Influence of the Profile Radius of the Deforming Roller on the Limit Degree of Deformation in the Process of Flow Forming
• Studies on Technological Features of Obtaining Thin Bimetallic Brass-Aluminum-Brass Strips
• Influence of Deformation Conditions on the Power Regimes of the Process of Cold Crimping of a Pipe Billet in a Conical Die
• The Study of Deformability of Heat-Resistant Alloy Named “Inconel Alloy 625” for Estimation of Plates Production Possibility at Wide-Strip Rolling “Mill 2300”
• Study of Force and Kinematic Parameters of the Low-Waste, Zero-Draft Hot Forging of Welding Neck Flanges on the Basis of a Combined Expansion-Extrusion Deforming Procedure
• Studies of Influence of Process Parameters on the Strain Rate at High-Speed Wire Drawing
• Management of Rolls Handling Facilities of Long Products Shop
• Structure and Mechanical Properties of Electrical Copper Wire Processed by Coarse and Medium Drawing
• Experimental Study of Energy Force Parameters of Combined Process "Rolling - ECA-Pressing"
• Texture Evolution during Hot Deformation of Al-Cu-Li-Mg-Zn-Zr-Sc Alloy
• Residual Stresses in Elastoplastic Bending of Round Bar
• Tubes’ Rupture at Faulty Fusion of Welding Seam
• Chapter 6: Technologies of Welding Production
• Evaluation of the Effectiveness of Plasma Torches Design for Metal Cutting by Qualimetric Method
• Conditions of Possible Application of Vibration Processing in the Course of Welding
• Calculation of Modes of Arc Welding under the Flux of Double-Sided Butt Joints
• The Influence of the Electrode Extension on the Welding-Technological Characteristics of Pulsed Arc Welding Using Cored Wire
• Research of Laser Welding of Thin-Sheet Structural Steels by Pulsed Laser Radiation
• The Comparison Research of Plasma Surface Hardening of 34CrNiMo6 Steel Produced on Direct and Reversed Polarity Current
• Research on Welding and Processing Behavior of Electrodes and Features of their Application in "Wet" Underwater Arc Welding
• Kinetics of Residual Stresses in a Welded Frameless Tubular Node
• Effect Study of Thermal Cutting Methods on the Edge’s Microstructure of High-Strength Steel Grade S700MC
• Dependence of Cold Cracks Formation from the Heat Input when Welding of High Strength Steel with Yield Strength of 500 MPa
• Welding of Valve Steels of Different-Sized Cross Sections
• Research on Plasma Electric Arc Granulation Processes of the Ural Region Mineral Raw Materials to Welding Materials for Submerged Arc Welding
• Austenite Decomposition Kinetics in Laser-Hybrid Welding of Steel of Strength Class K52
• Chapter 7: Additive Manufacturing
• Efficiency of Hybrid Cyclic Processing with the Use of Additive Technologies on CNC Machines for the Manufacture of Composite Aviation Parts due to the Reduction of Processing Errors
• Selective Laser Melting of Mixed EP648-Alumina Powder
• The Energy Density as a Reliable Parameter for Characterization of Selective Laser Melting of Various Alloys
• Single Track Formation during Selective Laser Melting of Ti-6Al-4V Alloy
• Properties Anisotropy of Additive Manufactured High-Porous Titanium Alloy with Non-Equiaxial Cellular Structure
• Formation of Structure in Titanium Lightweight Structures Made by Selective Laser Melting