Materials Science and Mechanical Engineering
Heftet /
2014
/ Engelsk
Produktdetaljer
ISBN
9783037859490
Publisert
2014-02-20
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1330 gr
Høyde
240 mm
Bredde
170 mm
Dybde
33 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
660
Collection of selected, peer reviewed papers from the 2013 International Conference on Materials Science and Mechanical Engineering (ICSME 2013), October 27-28, 2013, Kuala Lumpur, Malaysia.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 113 papers are grouped as follows:
Chapter 1: Materials Science and Materials Processing;
Chapter 2: Building Materials and Construction Technologies;
Chapter 3: Applied Mechanics;
Chapter 4: Mechanical and Electronic Engineering;
Chapter 5: Computer Technologies Application and Data Processing
Les mer
<p>Selected, peer reviewed paper from the 2013 International Conference on Materials Science and Mechanical Engineering (ICSME 2013), October 27-28, 2013, Kuala Lumpur, Malaysia</p>
- Preface and Organizing Committee
- Chapter 1: Materials Science and Materials Processing
- Effect of Anthracite on Preparation of Ceramsite Using Red Mud
- Study of Natural Bitumen Extracted from Oil Sands
- The Study of Biodegradation of Diesel Fuels by Different Strains of Pseudomonas
- On the Modification of Hypereutectic Al-15Si Alloy Using Rare Earth Ce
- Evaluation on Thermo-Mechanical Fatigue Life of IN738LC Using Finite Element Analysis
- Evaluation of Influence of Cracks on DVC Coating Using Finite Element Analysis
- Durability Evaluation of Thermal Barrier Coating (TBC) at High Temperature
- Prediction of Toughness through Evaluation of Alloying Elements Distribution Pattern at Heat-Affected Zone in Submerged-Arc Welding Process of API X70 Steel
- Novel Thermoplastic Materials from Wastes of the Leather Industry
- Applications of Activated Carbon Sorbents Based on Greek Walnut
- The Impact of Ion Exchange on Nature of Polyacrylic Acid and Nonionic Polymer Complex Formation
- Hydrophilic Interpolymer Associates as a Satellite Product of Reactions of Formation of Interpolymer Complexes
- Synthesis, Characterization and In Vitro Evaluation of Strontium-Containing Sol-Gel Derived Bioactive Glass/ Biphasic Calcium Phosphate Nanocomposite
- Effect of Titanium Depletion of High Temperature Treated NiTi Shape Memory Alloy Wire
- Applied Model of Magnetization of a Granulated Material
- Arc Behavior and Droplet Transfer Process of VP CMT
- Review on Optimization of Advanced Micro-Controlled Blending Composite Material Properties on LDPE/ CaCO3
- Structuring in Systems on the Basis of Calcium Sulfate Dihydrate
- Preparation of Magnetic Compositions of Diatomite
- Analyses of P-S-N Curve and Fracture Morphology of Die-Casting Magnesium Alloy AZ91D Containing Mischmetal
- Morphological Comparison of PLGA/Gelatin Scaffolds Produced by Freeze Casting and Freeze Drying Methods
- Study of Metal Solidification Model Based on Dissipative Structure
- Properties of Boride Layer on Boridesae 1035 Steel by Molten Salt
- Corrosion Characteristics of Copper in Malaysian Bioethanol and Gasoline Blends
- Catalyst Activity on Landfill Leachate Treatment with CWAO Method
- Influence Factors of Cu-Fe-La/FSC Catalyst Applications in CWAO Technology
- Research on Boron Extraction Rate of Boron-Containing Slag and its Industrial Experimental Conditions
- Study on Shape-Memory Mechanism and Properties of NR/TPI Blends
- Experimental Tooling Design of the Jet Erosion
- Influence of the Waveform and DC Offset on the Asymmetric Hysteresis Loop in Au/PZT/Pt/Al2O3/SiO2/Si Thin Films Prepared by MOCVD Method
- Effects of PCBM Loading and Thermal Annealing on Nanomorphology of Blend of Polymer/Fullerene Thin Films Solar Cells: Impact on Charge Carrier Mobility and Efficiency
- A Study on PHA/PLA/Talc Ternary Composites
- Synthesis of Sandwich-Like Carbon@SnO2@Carbon Composite Hollow Microspheres with High Rate Capability and Stability for Lithium-Ion Batteries
- Properties, Peculiarities and Applications of Powder Coatings Formed by Multi-Chamber Detonation Sprayer
- Study on Diallyl Phthalate Modified Phenol-Formaldehyde Resin
- Sintered Compacts of Titanium-Hydroxyapatite Used in Medicine
- An Investigation of Mechanical Properties of Recycled EVA/Commingled Plastics
- Creep Behavior Prediction Research of T92 Steel Based on BP Neural Network
- The Effect of Fiber Treatment on the Mechanical Properties of Christmas Palm Fiber-Polyester Composites
- Synthesis of Hollow and Hierarchical NiO Nanosheets Nanotubes and their Application as Supercapacitor Electrodes
- Analysis of Surface Topography under Varied Conditions of Energy Input Rate in Ultrasonic Machining of Pure Titanium
- Effect of Laser Beam Diameter on Cut Edge of Steel Plates Obtained by Laser Machining
- Chapter 2: Building Materials and Construction Technologies
- Using Mud as a Building Material in Building Affordable Houses in Hot Climate
- Use of Tannery Sludge Ash as Filler in Waterproofing Membranes
- Light-Weight Masonry Mortarswith Hollow Glass Microspheres for Winter Conditions
- Interlocking Tactile Concrete Paver with Addition of Steel Fibers
- Study of Density and Modulus of Elasticity of Lightweight Concrete with Brazilian Aggregate
- Temperature Cracks Controlling Technology for the Mass Concrete in Solid Sections of Lower Pylon Column
- Seasonal Thermal Energy Storage - A Size Selection
- Planning and Control in Construction of LW3-1 Jacket
- Joint Analysis of the Power Generation Construction Project Schedule, Cost and Quality Based on DEA
- Environmental and Economic Model Life Cycle of Buildings Based on the Concept of "Green Building”
- Chapter 3: Applied Mechanics
- Estimation of the Induced Hydrodynamic Periodic Forces of Marine Propeller under Non-Uniform Inflow via CFD
- Free Vibration Analysis of Single and Multilayered Sandwich FGM Plates-Assessment of Higher Order Refined Theories
- Experimental and Finite Element Analysis of Natural Modes and Frequencies of Hollow Fan Blades
- Low Cycle Fatigue and Crack Grow in Powder Nickel Alloy under Turbine Disk Wave Form Loading: Validation of Damage Accumulation Model
- Deformation Analysis and Fracture Mechanism of Steel Casing in Oil Wells
- Comparison of the Performance of the Calibration Algorithm of Wide-Angle Lens
- Shear Stress Distributions in a Bonded Joint under Tension
- Stress Analysis of Bonded Joint Using Solid Element Combinations
- Experimental Free Vibration Analysis of Clinched Beams
- Verification of Analytical Solution for a Problem of High-Velocity Transversal Impact on a Prismatic Beam
- The Force Analysis of Landing Stage and Transportation Terminal of Large Module with SPMT Trolley
- Interpolation-Element for Beam on Winkler Elastic Foundation
- About Some Misunderstandings in the Modern Theory of the Sound Isolation and Discrete Models of Sound Transmission
- An Inlet Area for Particle Mixing in a Two-Dimensional Fluidized Bed Using a CFD-DEM Model
- Finite Element Modeling of External Inversion and Comparison of Results with Existed Experimental and Theoretical Results
- The Analysis of Water Movement and Heat Transfer Modeling
- Heat Modeling for Friction Stir Welding
- Studies on Process Parameters for Aluminum Extrusion of Slide Rails
- A Finite Element Analysis of Cold-Formed Z-Purlins Supported by Sandwich Panels
- Searching Method of Optimization of Bending Reinforced Concrete Slabs with Simultaneous Assessment of Criterion Function and the Boundary Conditions
- Probability Analysis of Precision Equipment Vibration Isolation System
- The Thermo-Mechanical Couple Analysis Base on Assembly
- Numerical Simulation of Erosion and Flow Behaviour in Nozzle
- Lateral Torsional Buckling of Thin-Walled Cold-Formed Steel Beams with Web Holes - Finite Element Analysis
- Prediction of Fatigue Crack Initiation in Complete Contact Fretting Fatigue
- Early Degradation of Resurfacing Prostheses
- A Failed Tibial Osteotomy - The Influence of Bone Mineral Substituent
- Chapter 4: Mechanical and Electronic Engineering
- Theoretical Research on Ideal Brake Force Distribution of Tractor-Semitrailer Cornering Braking
- Enhanced Response Turbocharger Using Motor/Generator
- Hydrodynamic Efficiency Improvement of High-Specific-Speed Centrifugal Pump Impeller
- Selected 5-Axis Strategies for High-Speed Milling of Thin-Walled Parts
- Study on Characteristics of Passive Wheel Typed Robot
- New Approach for Mobile Robot Path Planning
- The Study of Vibration for Motor-Compressors
- Software Design of Reconfigurable Hydraulic Test System
- Application of Order Analysis in the Analysis of Noise in Automobile Alternator
- Secondary Developing and Finite Element Analysis on Screw Compressor of Automotive Air Conditioning
- A Mobile Robot Obstacle Avoidance Method Based on Improved Potential Field Method
- The Design and Research of the New Energy Efficient Combustion Stove
- Modeling the Dynamics of Robot Motor Drive Control System
- Package of Programs for the Synthesis of Space Gear Mechanism in the MAPLE Environment
- Performance Analysis of the Photovoltaic/Thermal Collector (PV/T) System for Different Malaysian Climatic Conditions
- A Working of Eddy Current Transducers under Control of Ferromagnetic Pipes in Condition of Insufficient Magnetic Saturation
- Ripple Carry Adder Using Two XOR Gates in QCA
- Optimization Design of Auxiliary Grooves on Rotor of Permanent Magnet Synchronous Motor for Electric Vehicles
- Chapter 5: Computer Technologies Application and Data Processing
- Discrete Construction of Compoundly Weighted Voronoi Diagram
- Research on Comprehensive Optimizing for Special Vehicle Handling and Riding Based on Multi-Objective Optimization Theory
- The Visual Modeling of the Intelligent Monitoring in the Production Line Based on UML Modeling
- The Evaluation of Internal Control System of Power Supply Enterprises in ERP Environment
- Ride Comfort Simulation of Minibus under Road Pulse Input
- Campus Card Information Query System Design and Implementation
- User Information Security Context-Aware Services in a Cloud Environment
- Simulaion on Strap-Down Inertial Navigation System Based on Simulink/M Programming Language
- Development of Multimedia Environment for Viewing the State of Stress in a Differential Element
- Digital Maintenance and Training of Digital Manufacturing - Reliability Theory and Principle of Modern Maintenance and Monitoring Technique
- The Mathematical Morphology Image Edge Detection Based on FPGA
- Multi-Focus Image Fusion Method via Multiple Wavelet Bases
- A Model and Decomposition Mechanism of Complex Task in MAS
- Security and Reliability Research of Remote Access for Subsea Blowout Preventer System
- State Feedback Robust H∞ Control for Generalized Discrete System and Simulation
- Analysis of Stability for Generalized Discrete Large-Scale Systems
Les mer
Produktdetaljer
ISBN
9783037859490
Publisert
2014-02-20
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1330 gr
Høyde
240 mm
Bredde
170 mm
Dybde
33 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
660