Produktdetaljer
ISBN
9783037856970
Publisert
2013-07-29
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
43 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
860
Redaktør
Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Manufacture Engineering, Quality and Production System (ICMEQP 2013), February 27-28, 2013, Hong Kong, China.
The papers are grouped as follows:
Chapter 1: New Materials and Advanced Materials;
Chapter 2: Steels and Alloys;
Chapter 3: Material Processing Technology;
Chapter 4: Engineering Solutions in Mechanical Engineering and Construction;
Chapter 5: Mechatronics and Automation;
Chapter 6: Applied Computing and Information Technology in Industry and Communication;
Chapter 7: Product Design and Engineering Management.
Les mer
<p>Selected, peer reviewed papers from the 2013 2nd International Conference on Manufacture Engineering, Quality and Production System (ICMEQP 2013), February 27-28, 2013, Hong Kong, China</p>
- Preface and Organizing Committee
- Chapter 1: New Materials and Advanced Materials
- Synthesis of Rutile Titanium Dioxide Whiskers by Flux Method
- Comparison of Current-Voltage Characteristics of Bulk Polyaniline and Nano Dimensional Polyaniline Particles in Nanoporous Dielectric Matrix of MIL-101
- Drug Release from a pH/Temperature Sensitive Hydrogel Bead of Poly(Lysine Methyl Ester-Diacetoxy Tartaric Acid) and Sodium Alginate
- Preparation and Drug Release Behavior from a Temperature-Sensitive Poly(aspartic Acid) Derivatives Hydrogel
- Preparation and Characterization of Dioxanone and Poly(dioxanone)
- The Role of Oxygen Ambience on the Optical Characteristics of ZnO Films
- Antifreeze Compounds to Allow Survival at Temperatures below 0 C Deg.
- Anode Buffer Layer of Organic Solar Cells and Recent Developments
- Tensile Behavior Stability of Basalt and Polysulfonamide Composites in High-Temperature Flue Gas Purification
- The Measurement of Dielectric Constant and Electrical Conductivity of ER Fluids
- Isomer Spectrum and Evolution Spectrum of C36 Isomers in Buffer Gas
- Effects of Organic Matters/Inorganic Matters Ratios (OM/IM) on Porosity and Expansibility of Ultra-Light Sewage Sludge Ceramsite (ULSC)
- Adsorption of BP-A onto Modified Zeolite and Main Influencing Factors
- 5-Methyl-Benzofuro[3,2-b]quinoline Derivatives as DNA Binders
- Chapter 2: Steels and Alloys
- Effects of Heat Treatment on the Creep Crack Growth Behavior in Al/Al-4wt%Cu Functionally Graded Material
- Microstructure Evolution and σ-Phase Precipitation Kinetics of 2507 Duplex Stainless Steel Aging at 850°C
- Thermodynamic Analysis and Observation of Inclusions in 10PCuRE Weathering Steel
- Effect of Ce on Microstructure and Mechanical Properties of 21Cr-11Ni Austenitic Stainless Steel
- Effects of Rare Earth on the Inclusions and Mechanical Properties of Austenitic Stainless Steel
- Influence of Heat Treatment on Microstructure and Mechanical Properties of Cr8Mo2SiV Cold Work Die Steel: A Comparison with Cr12MoV Steel
- Specimen's Short Fatigue Crack Fabrication Test for Q420qE
- Effect of RE Addition on Microstructure and Properties of As-Cast Mg-6Zn-Zr Alloy
- Developing 1-D MM of Transient Industrial Quenched Chromium Steel-5147H to Study the Effect of Radius on Temperature History
- Hot Corrosion of T122 and 347HFG Steels in Na2SO4 Salts at 800 and 900 °C
- Chapter 3: Material Processing Technology
- A Study of Chatter Stability Domain in Different Phases of Milling Process of Thin-Wall Component
- A Study of the Sensitivity of Parameters Affecting Surface Roughness in High Speed Milling Superalloy GH4169
- Prehistoric Effect of the Stamping Process on the Crash Analysis of an Automobile under Frontal Impact
- Research on Coal Tar Pitch Based Needle Coke Production Quality
- Effects of ELID on High Efficiency Deep Grinding of Y-TZP
- Optimization of Injection Process Parameters Based on Grey Theory
- Monosaccharides in Sulfuric Acid Hydrolysate of Corn Stalk
- Application of Full Factorial Design for Post Weld Heat Treatment Parameters on Duplex Stainless Steel UNS31803
- Experiment Design with Full Factorial in Gas Tungsten Arc Welding Parameters on Aluminium Alloy 5083
- Designing Experiments to Affect Post Weld Heat Treatment Parameters: Using the Full Factorial Design in Inconel X-750 Welds
- Synthesis of Closed Cell Aluminum Foam Using the Compression Method
- Research on Dyeing Process of Cotton Fabric Modified with Color Media
- Study on Compound Processing of Oil Tube Inner Wall Ion-Nitriding and the PCVD
- Numerical Simulation Analysis on the Temperature Field in Indirect Selective Laser Sintering of 316L
- ST14 Material Stamping Process Applications of Finite Element Analysis
- Research Progress of Three Kinds of Enhanced Heat Transfer Structures
- Effect of Increasing Wick Evaporation Area on Heat Transfer Performance for Loop Heat Pipes
- Improving of Energy Density in Welding Arc and its Mechanism Study
- The Study of Technology on Co-Carbonization for Biomass and Coal
- Tool Wear Monitoring Using Microphone Signals and Recurrence Quantification Analysis when Drilling Composites
- Numerical Simulation and Analysis to the Behavior of Inner Hole Defect of Integral Top Cover for Pressure Vessel
- Study on Improvement of Surface Temperature Uniformity by Bubble Stabilization in Flat-Plate Heat Pipe Hot Chuck
- Investigation on the Electrochemical Delignification of Pulp with Syringaldehyde
- Research of Element Segregation to Large Wheel Hub Hardness and Mechanical Properties
- Cutting Force, Temperature and Wear Behavior in Dry Machining of Nodular Cast Iron with Si3N4/TiC Micro-Nano-Composite Ceramic Tool
- Experimental Monitoring of HB Hardness and Ultimate Tensile Strength UTS of Pressure of Al-Si Castings Depending on the Increase Pressure Changes
- Chapter 4: Engineering Solutions in Mechanical Engineering and Construction
- Weld Penetration in Orthotropic Steel Bridges
- Experimental Study on Instability Behavior of Thermosyphon and Grooved Heat Pipe with TiO2-Nanofluid
- Paper Machine Boots Type Press Control System Analysis
- The Study of Monitoring and Control in the Urban Traffic Noise
- Development of a Molded Case Circuit Breaker with a Spring-Actuated Linkage Based on Multi-Body Dynamics Analysis
- Dynamic Response and Vibration of a Cantilevered Beam under an Accelerated Moving Mass
- Study on Formation Rule of Seismic Wavelet in Kelvin Medium
- Computerized Generation Simulation of Straight Bevel Gears with Tangear
- Fatigue Research on Welding Joint of the Main Girder in Bridge Crane
- Experimental Study of the Influencing Factors of Elevator Cable Magnetic Flux Leakage Detection Signal
- Analysis of Rock Slope Stability on the Basis of Limit Equilibrium Method
- CFD Study on Inner Fluid Flow of Novel Hydrocyclone
- The Selection of the Difference Scheme in Numerical Simulation of Low-Rise Gable Roof Surface Pressure
- The Effect of the Numerical Wind Tunnel Simulation Results of Arched Roof for Different Turbulence Models
- The Research on the Methodology of Diagnosing the Fault of Bearing in Warships Based on NS-EMD
- Power Quality Monitoring System Based on LabVIEW
- Experimental Modal and Vibration Analysis of High-Speed Industrial Sewing Machine
- Modeling and Design of High Power Half-Bridge LLC Resonant Converter
- Harmonic Gear Reducer Transmission Error Analysis and Detection
- The Research and Design of a New Shield Cutter Wear Detection System
- Numerical Analysis on Concrete Filled Steel Tube Supports Support Technology of III-Level South Roadway in Yangzhuang Mine
- The Use of Recycled Aggregates in Continuously Reinforced Concrete Pavements (CRCP)
- Natural Frequency and Vibration Modal Analysis of Composite Laminated Plate
- Chapter 5: Mechatronics and Automation
- Heterogeneous Sensor Data Fusion Method for Temperature Monitoring in Carbon Fiber Carbonization Process
- Reactive-Power Optimization Research Based on Load Fluctuation and Distributed Control
- Modeling and Simulation of Servo-Hydraulic Cylinder Systems for Multi Axis Test Control
- Study on NURBS Surface Tool Trajectory Planning of 6R Engraving Robot
- Based on Sliding Mode Variable Structure Current Controller for Induction Motor Vector Control Technology
- Neuro-Fuzzy Sliding Mode Control of Inverted Pendulum
- An Improved Greedy Algorithm for Coverage in Directional Sensor Networks
- The Government Subsidy Research of New Energy Sedan Industry Based on the Consumer Demand
- Applied Research of Composite Weights – TOPSIS Method in Real Estate Investment Decision
- On-Board Training System Design and Research on Related Technologies
- Design of Micro-Computer Controlling System for Batch Asphalt Mixing Equipment in Measurement and Gradation
- Discrete Manufacturing Plant Quality Control System Based on SPC
- Study of Positioning Technology in Sonobuoy Networks Based on DV-Hop Algorithm
- A Compact Mechanical Gripper System for Meso-Scale Parts Using a Ball-Roller Joint
- Research on a Hub Hydraulic Motor Driving System of Electric Vehicle
- Fiber Bragg Grating Force Sensing System with Temperature Compensation Scheme
- Non-Traditional Controllers: Composite ABS/TCS for Wheeled Vehicle
- Study on Fuzzy Semantic Controlling for Machinery and Equipment Manufacturing
- A Virtual Human's Driving Method Based on Motion Capture Data
- Design and Analysis of Cam Mechanisms with a Flat-Faced Follower by the Application of Support Function
- An Application Study of DPSSL Multi-Line Scanning on Teeth Model
- Energy Efficient Temperature Control with Particle Swarm Optimization for Smart Buildings
- The Human-Robot Interaction: An Investigation of Rescue Robot
- Design of Real-Time Detection Software System Oriented Press Mounting
- General Cartridge Shape Detection System Design
- Vibration Influence of Artillery Autoloader Analysis and Testing
- Based on the Derivative and Retrieved Development of CAPP Tools System
- MEMS: Its Distinct Advantages and some New Applications
- Dynamics Modeling and Resonance Analysis of Anti-Backlash Gear Transmission System Based on Harmonic Balance Method
- An Energy Saving Train Operation Control Model Based on Time-Space Network Formulation
- Chapter 6: Applied Computingand Information Technology in Industry and Communication
- Research of Reconfigurable Virtual Instrument Technology
- Visualization Engineering Simulation Based on HTML5 and Cloud Computing
- Research and Implementation of Search Engine Based on Lucene
- Construct Concept Structure for Abstract Algebra
- Quality Assurance by the Error Cause Detecting Function in a Packet Switching System
- Liquid Crystal Display Digital Clock Based on SCM
- Execution Process Monitoring for Ship Curved Block Construction Based on Task Package and Workload Distribution Sheet
- Virtual Reality Simulation of High Firing Rate Weapon
- Automobile Virtual Display System Design Method Based on Web
- Three-Dimensional Modeling of Virtual City: Taking MultiGenCreator for Example
- Development of Automatic Reinforcement Bar Placement for RC Walls Based on Structural Building Information Modeling (S-BIM)
- Manufacturing Systems Integration Using Real Time QoS-Aware Middleware
- A Computer Aided System to Discriminate Enhanced Colon Images by Three Data Mining Methods
- New Digital Predistortion Technique with RLS Method for Wide-Band OFDM Signals
- Research on Cloud Computing Industrial Cluster Innovation Evaluation Model
- 3D Reconstruction of Solid Rocket Motor Based on CT Images
- The Swarm Intelligence Optimization Algorithm and its Application
- Laboratory Management Based on Internet of Things
- Human Identification Using One Lead ECG Signal
- Chapter 7: Product Design and Engineering Management
- Research on the Cost Sharing of Customer Collaborative Product Innovation
- Designing Economic Inspection Sampling Procedure with Bayesian Approach
- An Investigation Report Ondigital Manufacturing of Orthoses
- Research on Social-Technical System for Project Oriented Collaborative Product Design
- Study on the Influence of Government Incentive Measures on Product Recovery Based on System Dynamics Simulation
- Simulation and Optimization for Household Electrical Appliances Production Logistics Based on Remanufacturing
- A Determination of the Engineering Characteristics in QFD Based on Sensory Quality Evaluation
- Modeling Approach to the Elements of TQM Practice
- Research on the Optimization of Operation Mode Based on Investment and Financing Platform in the Western China
- Chinese Industrialization Process - Take Creative Industries for Example
- A Product Innovation Study of the White Cane Engineering Creativity
- Product Innovative Development for the Toilet Seat Cover
- A Study of the Innovative Produce Design with the Laser Engraving Technology
- A Literature Review on the Optimization Method of Emergency Transportation and Logistics System
- Research on Bottleneck of Emergency Logistics Capability Based on Emergency Logistics Network
- Application of Heuristic Genetic Algorithm for Parameters Optimization of a Solar Cell Manufacturing Process
- Inventory-Up-Level Joint Replenishment Model for Re-Working Materials and New Materials
- Humanizing Design Research on Automatic Watering Machine
- A System Framework of Dynamic Coupled Quality Control Based on Complex Network
- Governance Mechanism of Relational Risks in Supply Chain
- Strategies for Construction Quality Control in Colleges and Universities of China
- Research on the Elements of Cost Management in the Engineering Project Construction
- Challenges Posed by Multi Variety and Small Batch Production Mode and Countermeasures Acted by Chinese Small and Medium Enterprises
- The Bullwhip Effect in Supply Chain and Countermeasures
- Research on the Multi-Project Management of IT Enterprises
- Inspiration of Food Packaging Design from Environmental Protection Materials
- A Methodology and Modelling Technique for Taxi Path Optimization
- Relationship between Energy Consumption Structure and Environmental Pollution
Les mer
Produktdetaljer
ISBN
9783037856970
Publisert
2013-07-29
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
43 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
860
Redaktør