Produktdetaljer
ISBN
9783038351801
Publisert
2014-10-08
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1750 gr
Høyde
240 mm
Bredde
170 mm
Dybde
48 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
962
Redaktør
Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Machine Design and Manufacturing Engineering (3rd ICMDME 2014), May 24-25, 2014, Jeju Island, South Korea.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 187 papers are grouped as follows:
Chapter 1: Materials Science,
Chapter 2: Manufacturing, Forming and Processing Technologies,
Chapter 3: Applied Mechanics and Mechanical Engineering: Experiment, Design and Simulation,
Chapter 4: Testing, Detection and Monitoring Technologies,
Chapter 5: Robotics, Control System and Applications,
Chapter 6: Product Design, Computation and Information Technologies
Les mer
<p>Selected, peer reviewed papers from the 2014 3rd International Conference on Machine Design and Manufacturing Engineering (3rd ICMDME 2014), May 24-25, 2014, Jeju Island, South Korea</p>
- Preface, Committees and Sponsors
- Chapter 1: Materials Science
- Conversion of Strontium Hydroxyapatite Nanopowders to Porous Scaffolds for Bone Implant Application
- Oxidation of Inconel 690 Alloys at 800-1000°C in Air
- Effects of TiC/TiN Contents and Sintering Temperatures on Microstructure and Mechanical Properties of Al2O3/Ti(C,N) Ceramic Materials
- Residual Life Prediction for In-Service Pressure Vessels Containing Crack Defects
- Gases Effects for Synthesis ZnO Nanostructures Using Carbon Assisted
- Numerical-Experimental Comparison to Validate a Mathematical Model for the Determination of the Superplastic Material Constants
- Mathematical Modelling to Evaluate the Superplastic Material Constants by Bulge Test
- Corrosion Behavior of Electrodeposited CoNiFe Nanoparticles Immersed in Different Environments
- Clustering of Composite Protein Films and their Packaging Properties
- Study on Performance of 8YSZ Thick Gradient TBC
- Study on Hydrothermal Process Variables Correlation to WO3 Nanostructure through Design of Experiments (DOE) Approach
- Analysis of Micro-Crack Inducing Mechanism by Graphite in Bond Area in Laser Repairing Grey Cast Iron
- Investigation of Redox-Transmetallation Process for Coating of Gold(Au)-Shell on Nickel(Ni)-Core Nanoparticles
- A Study of Water Crystal Growing Based on Dilution and Succussion Theory of Homeopathy
- Sustainable Natural Bio Composite for FDM Feedstocks
- Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles
- Inhibition Mechanism of Benzotriazole in Copper Chemical Mechanical Planarization
- Dynamic Propagation Problems Concerning Symmetrical Mode III Interface Crack of Aluminum Alloys
- Mixing and Characterisation of Stainless Steel 316L Feedstock for Waste Polystyrene Binder System in Metal Injection Molding (MIM)
- Chapter 2: Manufacturing, Forming and Processing Technologies
- Workshop Product Manufacturing Process Information Integration Based on USBOM
- A New Sample Selection Method for Testability Verification Experiment
- Research on the Single-Model Stochastic Assembly Line Balancing Problems of Type-1: A Task-Oriented Enumerative Algorithm
- Optimization of Surface Roughness in Micro-High Speed End Milling of Soda Lime Glass Using Uncoated Tungsten Carbide Tool with Compressed Air Blowing
- Characteristics of Swirl Effervescent Atomizer Spray Angle
- Position and the Size of Drawbeads for Sheet Metal Forming with the Finite Element Method
- Geological Adaptive Cutterhead Selection for EPB Shield Based on BP Neural Network
- A New Incremental Sheet Forming Process Based on Layer Manufacture
- Study on Microstructure and Properties of Laser-MIG Hybrid Welding Joints for Ti-70 Alloy
- Non-Melt Ultrasonic Bonding Method for Polymer MEMS Devices
- Manufacture of Model Apollo Capsule Utilizing Pulsed-Plasma Jet for Bow Shock Dispersion
- Changing Deformation under the Machined Surface in the Cutting Zone for the Different Materials during Drilling
- Study Accompanying Phenomenas at the Cutting Zone during Drilling Austenitic Stainless Steel X02Cr20Ni8TiMo
- Improving Rate of Penetration for PDC Drill Bit Using Reverse Engineering
- Parameters and Path Optimization on Formidability of Incremental Sheet Forming
- Development of Continuous-Type Electric Furnace to Recover Metal Values from Waste Mixed Batteries
- Implementation of Magnetic Damping to Reduce Chatter Amplitude and Tool Wear during Turning of Stainless Steel AISI 304
- Numerical Analysis of the Galloping Character of Fan-Shaped Ice Cover Conductor
- Mixing Homogeneity and Rheological Characterization for Optimal Binder Formulation for Metal Injection Moulding
- Experimental Study of Injection Conditions for a Thin-Walled Wax Pattern Using Response Surface Methodology
- Based on Particle Size of Cuttings to Study the Erosion of the Plugged Tee in Air Drilling
- Development of Batch-Type Electric Furnace for Recovery of Valuable Materials from Spent Batteries
- Chapter 3: Applied Mechanics and Mechanical Engineering: Experiment, Design and Simulation
- Modeling Platform for a Micro-CHP System with SOFC Operating under Load Changes
- Elastodynamic Analysis on a Long-Distance Transmission Roller Chain
- Research Prevention of Reeling Cocoon Sinking for Automatic Silk Reeling Machine
- Experiment Study on Achieving Triangle Spraying for Complete Fluidic Sprinkler
- Operational Features of Motorized Spindles with HSK Tool Connection
- Reasonable Choice of Motorized Spindles with HSK Tool Connection
- Truck Crane Hoisting Boom Reliability Analysis Based on Probabilistic and Interval Hybrid Model and Bayesian Network
- Kinematics Simulation Research on Bionic Manipulator
- Design of Galvanometer Laser Scanning System Based on FPGA
- Topology Optimization of Upper Turntable of General Vertical Rocket Rivet Fixture
- Application of Simulation Technology on the Design of One Special Expandable Tubular Thread
- Research on Coupled Thermo-Hydro-Mechanical Mechanism for Heavy Oil Thermal Recovery
- Simulation Analysis of Portal Crane Braking Effect with Dual-Stage Brakes under Fluctuating Wind Load
- Study on Gas-Liquid-Solid Three-Phase Flow Field of Radial-Straight-Vane Wet Fan
- The Design and Research of Connecting Rod Teaching Machine Based on the Principle of Metamorphic Mechanism
- Flexible Modeling and Dynamic Design of the Auto Jack
- Loading Capacity Calculated and Finite Element Analysis for Trough Roller
- Numerical Simulation and Analysis of Internal Flow Field for Control Valve Inlet Blocking Fault
- Study on Flow Characteristics of Valve Inlet Blockage
- Numerical Simulation of Supersonic Subsea Compact Wet Gas Separator for Gas Transmission Pipeline
- Flexible Laparoscopic Forceps Manipulator Using Synchronous Belt Mechanism
- Movement Mechanism Analysis of a Piezoelectric Spherical Two-Dimensional Stabilized Platform
- Inlet Passage’s Development and Optimization of New Tidal Unit-Shaft Tubular Turbine
- Improvement of Automated Guided Vehicle Design Using Finite Element Analysis
- Research about Dynamic Performance Prediction for Layout Structure of Globoidal Cam Machine
- Study on Virtual Prototype Modeling of Swing Movable Teeth Transmission
- Comparison of Theoretical and Numerical Analysis of Shell and Tube Heat Exchanger
- An Approach to Recognize Machining Features for In-Process Models by Using a Hybrid Graph and Rule-Based Method
- Analysis of Casing Hanger Fluid Channel Performance
- The Determination of the Three-Point Support Design of Machine Tool Based on iSIGHT
- Finite Element Analysis of the Rubber of the Prosthetic Knee Joint
- Design of 80000N·m Torsion Testing Machine
- Study on Whole PID Control Method of 5 Degree of Freedom Bearing-Less Motor
- Design on Structural Test and Modeling of the Mounting Structure of a GTF Aircraft Engine
- Simulation Analysis of Thinning Spinning Instability of Tube with Extra Thin-Wall and Height Diameter/Thickness Ratio
- A Novel Solar Concentrating Dish for Reduced Manufacturing Cost
- Numerical Investigation on Supercavitating Phenomenon for the Variable-Lateral-Force Cavitator
- Unsteady Flow Simulation of Directional Control Valve in Electro-Hydraulic Systems by Numerical Analysis
- Inherent Characteristic Similarity Analysis on Short Thin-Walled Cylindrical Shell
- CFD Analysis of Energy Loss of Direction Control Valve in Electro-Hydraulic Systems with Inverter
- Optimal Locomotive Control Parameters of Biologically Inspired Four-Legged Walking Machine
- Modal Analysis and Experimental Research of Marine Gearbox
- Synthetic Design of High Aspect Ratio Folding Wings Based on Aeroelastic Analysis
- Real-Time Semi-Physical Simulation of Industry Design System Based on Virtual Reality Technology
- Mixing Analysis of Laminar Flow in Static Mixers with Circle Grid Fractal Perforated Plate Elements
- Research on the Static and Dynamic Characteristics of the Sliding Rail Joint Surfaces of the Fe-Based Porous Oily Material
- The Thermal Structure Coupling Analysis of Hydrostatic Motorized Spindle in Ultra-Precision Grinding Machine
- Dynamic Control of Braking-Force Distribution as Turning Braking
- The Design of Dynamic Model of Engineering Material Arresting System
- Slip Enhancement in Continuously Variable Transmission (CVT) by Using Adaptive Fuzzy Logic and LQR Controller
- The Application of Safety Membranes in Hydropower Plant
- Screw Fixing Fracture and Fatigue Failure on Particleboard Surface Using Different Style of Screw Insertion Technique
- Research on the Ride Comfort of Electric Drive System Based on Double Trailing Arm Suspension
- Double-Acting Pneumatic-Hydraulic Pressure Amplifier Having Two-Step Liquid Pressure Output Pressure Driven by Pneumatic Cylinder with Rodless Piston
- Influence of Tailrace Surge Chamber with Standpipe on Draft Tube Pressure
- Research on Marine Electric Propulsion Shafting under Electromechanical Coupling Condition
- A Design of Mini Actuator for Compact Camera without Using Permanent Magnet
- Influence Characteristics of Shaft and Disk Models on Natural Frequency of Single-Rotor System
- Study on Hydraulic System for Full Hybrid Transmission
- Performance and Loads Investigation of Optimum Speed Rotors
- Optimal Design of Voice Coil Motor for Micro Stage
- Development of Vibration Simulator to Evaluate Vibration Characteristics for Railway Structure
- The Analyses of the Critical Speed and Unbalance Response in the Rotor System
- The Vibration Radiation Noise and Optimized Analysis of the Shell
- Vibration Test of Bearing Ball Fatigue Testing Machine Based on VB
- Gear Meshing Noise of the Closed Gearbox
- Study of Improving Low Voltage Ride - Through Capability of Doubly - Fed Induction Generator by Using DVR
- Design and Manufacture of the Prototype of an Innovative Pump for ‘Proof of Concept’ Test
- Research on DEH System Characteristics Effect on Power System Low-Frequency Oscillations
- Unsaturated Polyesters as Stamps for Hot Embossing of Micropumps
- Influence of Successive Load Rejections on Water Hammer Pressure of Spiral Case in Long Diversion-Type Hydropower Station
- Research of the Impact of Turbine Parameters on Low-Frequency Oscillation Based on Simulink
- Valveless Pump in Closed Loop Tube System
- Numerical Simulation of In-Pipe Turbulent Noise
- The Optimization Model of in Job-Shop Scheduling Problem with Alternative Machines Based on Improved Genetic Algorithm
- Finite Element Analysis and Topology Optimization Design for Motional Board of Injection Molding Machine
- Research to the Overall Design of 4-Axis VMC Based on CAD and NC Mfg Verification
- Computer Aided Design and Manufacture of a Novel Vertical Axis Wind Turbine Rotor with Winglet
- Engine Performance and Emission of Emulsified Biodiesel
- Analysis on Dynamic Characteristics of Closed Hydrostatic Guideway Throttled by Capillary
- Analysis of the Dynamic Characteristics of the Aerostatic Journal Bearings
- Vehicle Braking Stability Analysis in Turn Condition
- Combined Influence of Misalignment and Orifice Diameter on the Static Performances of Hydrostatic, Water-Lubricated Journal Bearings
- Simulation on the Life Expectancy of Fine Blanking Tool Punch for High-Strength Automobile Start Motor Flange
- The Design of Electromagnetic Preheating Unit for Vehicle Engines
- Effect of Biodiesel from Waste Cooking Oil on Mixture Formation and Emission of Burner Combustion
- Study on 3D Model Reconstruction of Vehicles from 2D Images
- The Study on PCCI Mode of Diesel Engine Fueled with Methanol/Dimethyl Ether
- Research on the Fault Characteristic Extraction of Hydropower Units Based on Hilbert-Huang Transform
- Chapter 4: Testing, Detection and Monitoring Technologies
- A Rapid and Efficient Feature Point Detection and Matching Algorithm
- The Design of Online Measurement System for Polyurethane Sheet
- Review on Visibility Monitoring in Expressway under Foggy Condition
- A Comparison of Short Duration Traffic Counts Methodologies for Estimating Annual Average Daily Traffic
- Eye Movements as a Means to Evaluate Operation Interface of Flat Knitting Machine
- Comparison of Crack Extraction Performance According to Different Edge Detectors
- The Design of Data Acquisition System in Wireless Dynamic Strain Acquisition Technology
- Whole-Condition Dynamic Alarm Research of Hydropower Unit Operating Parameters
- Energy Saving Algorithm Research Based on Interior Monitoring System
- Building a Practical Anechoic Chamber for Aero-Acoustic Measurements
- Manufacture and Material Considerations in Wind Tunnel Experimentation
- Effects of UV-HEPA Air Filters on Air Quality Status inside a Public Museum in Malaysia
- Changes Process of the Shear Modulus in Gravel Bed under Horizontal Vibration Triggering
- Finite Element Analysis of Gold Bonding under Different Loading Conditions
- Safety Margin Characterization for In-Service Pressure Vessels Containing Crack Defects
- Module Similarity Measure Method of Products Based on Assembly Relationship
- Power Spectrum Analysis Based on VB Language
- Analysis of Laminated Composite Plates by Local Inverse Multiquadrics Collocation Method
- Seismic Response Analysis of Large-Scale Site with Circular Diaphragm Wall
- Fault Diagnosis for CNC Machine Tool Based on Mapping Model
- A Study on the Interference Checking in CNC Incremental Forming Based on Parasolid
- A Study on Contact Angle and Surface Tension on Copper-ABS for FDM Feedstock
- Chapter 5: Robotics, Control System and Applications
- A Case Study of the Link between Virtual and Physical Prototyping in Servo-Pneumatic System
- A Novel 3-DOF Parallel Robot and its Kinematic Analysis
- The Research of Kinematic Model in the Rehabilitative Training System
- Research on Compiled-Type Numerical Control System and its Data Compression Technology
- Comparison between Waveform and Bug Path Planning Algorithm for Mobile Robot
- Comparison between Normal Waveform and Modified Wavefront Path Planning Algorithm for Mobile Robot
- Development of Automatic Wafer Centering System for Vacuum Transfer Robot Using for Semiconductor Manufacturing
- Molecular Sieve Valve Control System Based on DCS
- Low Cost Sensor Data Fusion in Omnidirectional Mobile Robot Feedback System to Improve the Navigation Accuracy
- Electro-Hydraulic Servo Actuator Fuzzy Self-Tuning PID Control Research
- Position Tracking Control of Flexible Robot Joints Using Model Predictive Control
- Probabilistic Approach to Mobile Robot Localization Based on Gaussian Models of Sensors
- Electro-Hydraulic Servo Actuator Parameters Self-Tuning Three-Dimensional Fuzzy Control Research
- Chapter 6: Product Design, Computation and Information Technologies
- The Estimation of Reliability Function in Terms of the Catastrophe Theory
- Research and Motion Analysis of Multi-Object Compact Layout Based on CPR in 2D
- The Design and Implementation of PDM System for Small and Medium Enterprises
- The Computation of the Effective Temperature of the Land Surface Covered with Canopy
- Variable Parameters-Based Damage Creep Model of Weak Rock Layer and its Engineering Application
- Summary of and Lessons from Domestic and Overseas Setting of Truck Escape Ramp
- Research on Active Absorbing Wave Maker System
- A New Contour-Parallel Tool Path Planning Algorithm for 2D Pockets
- Speeding Maintenance Performance through Time Study
- Ontologies to Capture and Share Knowledge in a Distributed Environment Needed to Support Decision Making in Probabilistic Design
- Dynamic Clustering Heuristic Method for Smart Grid Computing
- Performance Analysis of the PISO-Based CFD Simulation
- Research of Hadoop Task Speculative Execution Based on Process Migration
- Review of Analysis Model on Three-Dimensional Braided Composites
- The Fuzzy Evaluation Based on Entropy Method for Heavy Oil Reservoir Horizontal Well CO2 Huff and Puff Well Selection
- Numerical Analysis of the Iced Transmission Line Galloping
- Double Erasures Correcting MDS Code with Heterogeneous Placement
- Based on the Analysis and Study of Computer-Aided Industrial Design (CAID) Technology
- Comparison Study of Multi-Layer and Folding Liners of Corrugated Cartons - Domestic Ceramic Packaging
- Application of New Design Method by High-Strength Composite Material
- The Development of Bicycle into Trandem: The Bike Can Be Used as Tandem or Single Depend of the Necessity
- Intelligent Quilt Based on Conductive Textile Materials, Smart Flexible Sensors, and Composite Charging Technology
Les mer
Produktdetaljer
ISBN
9783038351801
Publisert
2014-10-08
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1750 gr
Høyde
240 mm
Bredde
170 mm
Dybde
48 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
962
Redaktør