Produktdetaljer
ISBN
9783037859230
Publisert
2014-02-06
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1300 gr
Høyde
240 mm
Bredde
170 mm
Dybde
37 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
730
Redaktør
Collection of selected, peer reviewed papers from the 2013 4th International Conference on Applied Mechanics and Mechanical Engineering (ICAMME 2013), October 11-12, 2013, Singapore.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 116 papers are grouped as follows:
Chapter 1: Advanced Materials Science and Chemical Engineering;
Chapter 2: Measurement Technology of Detection and Monitoring;
Chapter 3: Control, Electronic, Automation Technology and Communication Engineering;
Chapter 4: Mechanical Engineering, Manufacturing Technology and Management;
Chapter 5: Biomechanics Technology;
Chapter 6: Rock, Civil and Structural Engineering
Les mer
<p>Selected, peer reviewed papers from the 2013 4th International Conference on Applied Mechanics and Mechanical Engineering (ICAMME 2013), October 11-12, 2013, Singapore</p>
- Preface and Organizing Committee
- Chapter 1: Advanced Materials Science and Chemical Engineering
- Chemical Extraction of Heavy Metals from the Ash Using Perchloric Acid
- XRD (X-Ray Diffraction) Analysis of the Stabilized Ash
- Fabrication and Microstructural Analysis of CNTs Reinforced Copper Matrix Nanocomposites via MIM Technique
- Corrosion of Copper Pipeline Systems under Different Flow Conditions
- Molecular Dynamics Simulation of Stick-Slip Friction on a Metal Surface
- Study on the Effects of Diluent on Silica/Epoxy Resin Composite Material Phase Change
- Optimization of Epoxy Composite on Thermal Decomposition Utilizing Experimental Design Method
- The Structure and Adhesion of Zr/TiAlN Coatings on High-Speed Steel and Cemented Carbide Substrates
- Preparation and Characterization of Fe3O4 Magnetic Nanoparticles Labeled with Technetium-99m Pertectnetate
- Predicting the Characteristics of Biofouling Mass Based on Support Vector Machine
- Evaluation of Threshold Condition of Interior Annular Crack Growth in Gigacycle Regime
- Study of Characteristics of Partial Discharge for Assessment of Condition of Electrical Insulating Materials of Power Supply System
- The Study about the Effect of Geometric Parameters' and Material Properties’ Changing on the Electromagnetic Performance of BSSAS
- The Comprehensive Utilization of Fly Ash
- Microstructure and Properties of High Performance Steels by Controlled Rolling
- Coefficient of Performance of Thermoelectric Cooling on Nanofluids
- Prediction of the Theoretical Strain Limit for the Bulging of Sheet Metals by the Approximate Analytic Method
- Solid Oxide Electrolysis Cell Systems — Variant Analysis of the Structures and Parameters
- Chapter 2: Measurement Technology of Detection and Monitoring
- Using Shear Wave Velocity to Assess the Stiffness of Soil-Cement-Fly Ash
- An Automatical Matching Method Applied in Kinematics Measurement for the Flapping Rotary Wing
- Fault Diagnosis of VCM Type AF Actuator Module for Phone Camera by Vibration Analysis
- Glycophorin a Expression in HEL-92 Cells Treated with Silica Gel Particles
- Detection for Rail Route State Deformation Based on Trap-Down Inertial Technology
- An Analysis of Algebraic Reasoning Test of the Life Situation of Multiple-Representation by Using Grey Relational to Assess
- Study on the Influence Factors of DWTT for X70 Thick Wall Linepipe
- Study on the Methods of Predicting the Fouling Characteristics of Plate Heat Exchanger Based on Water Quality Parameters
- Extraction of Modal Parameters from Structural Acoustical Responses
- The Application of Mobile P2P Communication Mechanism in Geological Disaster Monitoring
- Chapter 3: Control, Electronic, Automation Technology and Communication Engineering
- The Distributions and Moments of the First Entrance Time for Nonhomogeneous (H,Q) Process
- Compliant Control for the Redundant Dual-Arm Live-Working Robot
- Waveform Relaxation Approach to Solution of Nonlinear Circuit
- Impact of Wind Penetration Level on System Dynamic Performance
- The Judgment of Algebraic Immunity and Resilience of Balanced H Boolean Functions
- A Study of RootLocus with Application to the Design of PD Controller for Linear Control Systems
- Design and Development of the Short Message System on the Campus Network
- Robust Control Techniques Applied to the Hot-Dip Galvanizing Process
- A Dual-Arm Cooperating Physiotherapy Service Robot Based on Visual Position
- EEG Classification for BCI Based on CSP and SVM-GA
- Study on Improved Multi-Objective Adaptive Artificial Immune Genetic Algorithm
- The On-Line Monitoring Method for Drainage Wire Galloping in High Voltage Overhead Power Transmission Line
- Research on the Improving of the Large-Scale Wind Power Accommodation Ability in Inner Mongolia Grid
- The Research of Power Grid Reserve Capacity Model Based on Equivalent Continuous Load
- Optimal H∞ Fuzzy Control for Nonlinear Interconnected Systems via Genetic Algorithm
- Design and Beam Quality Analysis of Reflective Telescopes through Diffraction Effects and Third Order Aberrations
- A Wireless Control System for 3D Microscope
- Theoretical and Numerical Solutions of Maglev Train Induced Vibration
- Pressure Control Technology of DDVC Gas Regulating System for Butterfly Valve
- Thermal Performance of Commercial Vehicle Braking Process during the Vehicle Descending Speed Control on Roads with Long Length Steep Inclination - A Case Study
- Thermal Effects Analysis of Flip Chip LED Packages with through Silicon via (TSV) by Using Numerical Simulation
- Chapter 4: Mechanical Engineering, Manufacturing Technology and Management
- An Automatic Assembly Technology for Perforated Discs Based on Contour Optimized Hough Circle Transform
- Finite Element Analysis of the Piston Thermal Load in a Diesel Engine
- Numerical Simulation of High Frequency Electromagnetic Wave in Microwave Cavity for Soot Oxidation
- Decision Making Toolset for Woody Biomass Supply Chain in Karelia
- Development of CAD-to-CAE Model Preparation Technology
- Fatigue Strength of the Rolls with Grooves
- Dynamics Analysis of Vibrating Screen Based on Double Compound Pendulum with Single Motor Driving
- Development of a High Precision Silicone Rubber Mold for Cylinder Block
- Development of a Low-Cost Automatic Vacuum Degassing System for Rapid Tooling
- Layout Optimization for Welding Workshop of Vehicle Door Based on SLP
- System Dynamics Analysis and Mode-Switch Control for a 3-Mode Range-Extender Electric Vehicle
- Manual Assembly Workstation Redesign Based on a New Quantitative Method for Postural Comfort Evaluation
- Deformation Solution in Thin Ring Plates with Circular Holes
- Theoretical Analysis and Modeling Fora Piezoelectric Bimorph Actuator with Overhanging
- A Numerical Study on the Influencing Parameters of Tire-Acoustic Cavity
- The Influence of On-off Shift Solenoid Valve's Design Parameters on Electromagnetic Force
- Design of an Innovative Piezoelectric Jacquard Selection Mechanism
- Theoretical Analysis and Experimental Verification that Influence Factors of Climb and Conventional Milling on Surface Roughness
- Innovation Research on Medium and Low-Tech Traditional Industry
- Design of a Kind of Non-Resonant Linear Piezoelectric Motor
- Study of the Tool Life and the Tool Wear Mechanisms in the Production of Holes in Stainless Steel
- Change of Material Deformation under the Machined Surface when Drilling Steel C45 and DIN 1.4301
- Lubrication in Push-Through Bending on Bending of Aluminum Extrusion Section
- Effect of Die Properties on Bending Characteristics of Push-Through Bending of Aluminum Extrusion Section
- Numerical Dynamic Analysis of a Single Link Soft Robot Finger
- A 3D Finite Element Simulation of Cold Roll Forming of Wrought Magnesium Alloy Sheets
- Supply Chain Controllable Costs Management and Strategy Analysis
- Design of the Typical Claw Structure Using the Technology of LFC
- Discuss the Fault Disposal of Wind Vane and Anemometer of MW Wind Turbine
- A Stochastic Collocation Method for Uncertainty Analysis of Fatigue Damage Prognosis
- Develop on Tutorial Courseware for the Theoretical Mechanics Based on the Basic Conception
- Research of Parallel Machine Scheduling with Flexible Resources Based on Nested Partition Method
- Applying Technology Acceptance Model to Explore the Adoption of Hydrogen-Electric Motorcycle in Taiwan
- Design Optimization of Blade's Stacking Line Based on Fluid-Structure Coupling Technique
- Chaotic Motions of a Damped and Driven Morse Oscillator
- Development of Landing and Taxiing Response Analysis System for Aircraft with Multi-Wheels and Multi-Landing Gears
- Chapter 5: Biomechanics Technology
- State of the Art Analysis of Device for “CPM” Rehabilitation of Wrist and Hand
- Evaluation of Stress Shielding for Three Types of Implanted Femurs Based on Stress Distribution
- Biomechanical Analysis of Starting Action on an Outstanding Short Track Speed Skating Female Athlete
- Cable-Driven Parallel Manipulator for Lower Limb Rehabilitation
- Design and Supporting Force Experimental for the Bionic Water Strider Model
- Research on Micro and Nano Structure and Wettability for Water Strider’S Leg, Abdomen, Back and Wing
- Study on Micro and Nano Structure and Superhydrophobicity for Several Typical Planing Animals Legs
- Substrate Stiffness as a Regulator in Catalyzing Integrin-Mediated Cell Adhesion Nucleation: A Mechanochemical Model
- Chapter 6: Rock, Civil and Structural Engineering
- Reducing Air Pollutants through Road Innovative Intersections
- Estimation of Measures of Effectiveness (MOE) for the C-Roundabouts
- Study on Damage Characteristics of Unstable Rocks under Excitation Effect
- Design Analysis of Shallow Embedded Column Foot of Reactive Powder Concrete Pole
- Research on Application of Non-Equilateral Angle Steel for Transmission Towers
- Calculation of Turbo-Roundabouts with Slip Lanes
- Aseismic Analysis on Separation Joint of Atrium Roof and Connection Modes with Tower
- Performance of Steel Pipeline with Concrete Coating (Modeled with Concrete Damage Plasticity) Underseismic Wave Passage
- Case Study for Rectangular Composite Panel Zone
- Orthogonal Expansion Method of Random Processes for Fluctuating Pressure of Water Flow
- Finite Element Model of High-Voltage Transmission Tower Confirmed
- Gobi Inclined Excavation Based Numerical Analysis
- A New Type of Phase-to-Phase Spacer
- The Numerical Simulation Analysis of Transmission Lines New Composite Type Foundation
- Dynamic Stability Analysis of the Tower Structure of Construction Elevators
- Laboratory Experiments on Effects of Water Jet on Heat-Affected Concretes
- Development of High Compressive Strength Fire Brick
- Application Using Sugar Sediment to Enhance Mechanical Properties of Autoclaved Aerated Concrete
- Calculating Algorithm for Torsional Stiffness of Conductors-Spacers
- Constitutes Model of Housing Prices and Analysis of the Reasons for High Prices in China
- Failure Patterns Analysis of Transmission Tower under Longitudinal Tensions Based on the Finite Element Numerical Simulation
- An Analysis of Visitors' Satisfaction toward Urban Parks Based on the Method of IPA - Illustrated with the Example of Beijing Lotus Pond Park
- Seepage Mechanics Mechanism of Undercompacted Mudstone's Formation
Les mer
Produktdetaljer
ISBN
9783037859230
Publisert
2014-02-06
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1300 gr
Høyde
240 mm
Bredde
170 mm
Dybde
37 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
730
Redaktør