Produktdetaljer
ISBN
9783037855577
Publisert
2013-02-06
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
70 mm
Aldersnivå
P, UP, 06, 05
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1400
The collection includes selected, peer-reviewed papers from the 2012 3rd International Conference on Applied Mechanics and Mechanical Engineering (ICAMME 2012) held in November 14-15, 2012 in Macau.
The 226 peer reviewed papers are grouped into the following chapters:
Chapter 1: Applied Mechanics and Measurement Technology of Detection and Monitoring,
Chapter 2: Mechanical Engineering, Manufacturing Technology and Application,
Chapter 3: Advanced Materials Science and Engineering,
Chapter 4: Rock, Civil and Structural Engineering,
Chapter 5: Control, Electronic, Automation Technology and Communication Engineering,
Chapter 6: Biomechanics Technology.
Les mer
<p>Selected, peer reviewed papers from the 2012 3rd International Conference on Applied Mechanics and Mechanical Engineering (ICAMME 2012), November 14-15, 2012, Macau</p>
- Preface and Organizing Committee
- Chapter 1: Applied Mechanics and Measurement Technology of Detection and Monitoring
- Study on the Method of Crack Detection of Steel Rods Based on Modal Analysis
- Detection System for Scratch on the Wheel Tread of Train Based on PSD
- Effects of Time Dependent Temperature and Thermal Radiation on Free Convection Flow in Unsteady Couette Motion
- Numerical Simulation of Stress Wave Propagation Induced by Cut Blasting in Multi-Media
- Quantifying Fractal Dynamics of Metallogenic Systems with Detrended Fluctuation Analysis
- Bottom Dead Center Repeat Precision of High-Speed Press Measurement
- Research on Fatigue Life of Autofrettaged Thick-Walled Cylinder in Probabilistic Fracture Mechanics
- Numerical Analysis of Ice Accretion and Icing Effects on Airfoils
- Identification and Reconstruction of Cracks in Ultrasonic Infrared Thermography
- Study of the Parameters of Deep Drawing Process Based on the Simulation of Dynaform
- The Simulation and Sensitivity Analysis of S-Lay Installation in Deep Water
- Finite Element Analysis of Elevator Link Stress Based on Pro/E and ANSYS
- Quantitative Analysis of Transverse Cracking of Rail Using Eddy Current Non-Destructive Testing
- Convergence Study on Application of the Over-Deterministic Method for Determination of Near-Tip Fields in a Cracked Plate Loaded in Mixed-Mode
- Numerical Simulation Studies on Surface Erosion of Transmission Line in Sand and Dust Conditions
- Experimental Study on Measurement Accuracy of Prediction Index K1 for Rock Crosscut Coal Uncovering
- Temperature Drift Compensation Algorithm Based on BP and GA in Quartzes Flexible Accelerometer
- Buffeting Prediction of a Square Cylinder with Inflow Turbulence
- A Practical Method to Calculate Elasto-Plastic J-Integral
- Real-Time Detection of Adhesion Coefficient between Tire and Road
- Research on WALKER Constitutive Model Tangent Modulus
- Flow Microsensor of Thermal Type for Measurements of Gas Fluxes
- A Study of Air Flow through Perforated Tile for Air Conditioning System in Data Center
- The Evolution Equation for Wave Processes of the Shift Deformation
- Structural Damage Detection by Integrating Non-Negative Matrix Factorization and Relevance Vector Machines
- The Sufficient Condition for the Existence of Periodic Solution of Certain Three Dimensional Nonlinear Dynamical Systems
- Combination Method of Kernel Principal Component Analysis and Independent Component Analysis for Process Monitoring
- Grid Validations for Downburst Simulations
- Semi-Orthogonal Binary Spline Wavelets in Incompressible Fluid Dynamics
- Two-Dimension Temperature Field Reconstruction in Furnace by Acoustic Method
- Tilt Error Analysis and Compensation for Two-Position North Determining Scheme in FOG North-Seeker
- Locomotive Characteristics of Body and Limb in a Terrestrial Vertebrates
- UGNX8.0 Multi-Axis Machining Technology in Impeller Design and Programming Simulation Processing Application
- Measurement of Blood Pressure and Heart Beat Based on Sensors and Microcontrollers
- Numerical and Experimental Investigation on the Weighing System of an Incubator Shaker
- Design of a LabVIEW System Applied to Predictive Maintenance
- Drum Sludge Drying Equipment Energy Dissipation Factor Analysis
- The Design about Aiming at Amount of Change from Baseline Detector with Characteristics of High-Resolution
- Density-Based Distributed Elliptical Anomaly Detection in Wireless Sensor Networks
- Interstellar Autonomous Navigation System Using X-Ray Pulsar and Stellar Angle Measurement
- Recognizing Check Magnetic Code Based on Peak-Valley Location and Amplitude
- Wireless Gas Detector System Using Microcontrollers, PLC and SCADA System for Monitoring Environmental Pollution
- Chapter 2: Mechanical Engineering, Manufacturing Technology and Application
- Suppressing Chatter in a Plunge Grinding Process: Application of Variable Rotational Speed of Workpiece
- An Efficient Model for Trust Force Dynamic Analysis in Drilling of CFRP/AL Stack
- An Optimal Selection Model of the Satellite Lurk Orbit
- Dynamic Responses of Vehicle-Track-Foundation System under Axial Loads
- Thermodynamic Performance Analysis of Ammonia-Water Rankine Cycles Using Heat Sources of High and Low Temperatures
- Effects of Repair Weld on Residual Stress Distributions in Offshore Pipelines
- Research of Dynamics Simulation of a Six-DOF Segment Erector for Tunnel Boring Machine
- Experimental Investigations on Characteristics and Welding Forces in Friction Stir Welding of AA 6061-T6 Aluminum Alloy
- The Application of Hasofer-Lind Method in Reliability Design of Thin-Walled Cylindrical Shell
- Statistical Energy Analysis of Wind Noise in High-Speed Train Cab
- Kinematic Model of Mobile-Cylinder Engine
- A Method to Test Holding Force of an Electrode Tab-Clamp for Lithium-Ion Battery Formation
- Research on the Sufficient Condition for the Existence of Periodic Solution of FGM Subjected to Aero-Thermal Load
- Residual Stress Prediction for High Speed Machining
- Slip-Slope Estimation of Mutative Road Friction Coefficient Based on Unscented Particle Filter
- Stress Analysis and Safety Prediction of Alloy Wheel Hub
- The Refined Equations of Special Orthotropic Piezoelectric Plate-I: Anti-Symmetrical Transverse Surface Loadings
- The Refined Equations of Special Orthotropic Piezoelectric Plate-II: Symmetrical Transverse Surface Loadings
- Analysis of Contacting Mechanical Characters Based on Cyclical Symmetrical Theory
- A Coupled Fluid-Structure Simulation for Variable Displacement Pump Used in Vehicle
- Characteristics of Self-Synchronization of Dual-Rotors System
- The Simulation Application for the Structure Design of the Etcher Nozzle
- Design Method of the Advanced Actuator
- Innovation of the Advanced Actuator
- Study on Inversions of the Offset Planetary Train with Bevel Gears
- Steady-State Load Analysis of a Caterpillar Chassis by Finite Element Method
- Green NC Transformation of Lathe C6132 Based on the Green Manufacturing Process
- Data-Driven Based Gas Path Fault Diagnosis for Turbo-Shaft Engine
- The Study of Electromagnetic Slip Clutch Application in Step Less Speed Regulation of Small Cars
- Improved Design and Dynamic Simulation of High Aspect Ratio Folding Wings
- Manufacturing Information Model for Design for Manufacturing
- Two Layer Fuzzy Generalized Maxwell-Slip Compensator in Direct Drive Servo Hydraulic System
- Large Eddy Simulation of Two-Phase Mixing Layer Flows in the Scramjet
- Investigation for Convective Heat Transfer on Grinding Work-Piece Surface Subjected to a Mist/Air Impinging Jet
- Investigation on Convective Heat Transfer over a Rotating Disk with Bottom Wall Subjected to Uniform Heat Flux
- Numerical Simulation of Impinging Jet with Mist Injection
- Effects of Centrifugal Pumps Outlet Angle on Flow Induced Vibration and Noise
- Preliminary Research of Manufacturing Technology for ITER Magnet Supports
- A Numerical Study of an Injection-Compression Molding Process by Using a Moving Grid
- The Control of Hydrogen Flow in Keeping with Load Changing at the PEMFC
- Neural Network and D-S Evidence Theory Based Condition Monitoring and Fault Diagnosis of Drilling
- Evaluation of a Three-Parameter Equation in the Multiaxial Fatigue Life Prediction
- Effects of Droplet Size on Transient Behavior of after Fogging Process
- Analysis on Thermal-Fluid-Solid Interaction of Straight Pad Finger Seal Performance
- Theoretical Analysis and Experiment of Super Hybrid Rice Seeds Embryo Oriented Based on Arc-Shaped Guided Plate
- The Influence of Speed on the Performance of Centrifugal Pump
- A Numerical Study on the Influence of Grooves on Heat Transfer Performance of Wet Clutch
- Development of Connecting Rod Three-Dimensional Parametric Design System
- Numerical Simulation of Non-Equal Diameter Cylinder
- Ontology Based Knowledge Processing in Condition Based Maintenance System
- A Novel Shape Memory Alloy Damper and its Application in the Vibration Control of Transmission Towers
- Development of 1×4 MEMS Multifunction Integrated Optical Device
- Numerical Study of Inverse Problems of Nonscattering Anisotropic Shell Theory
- Three-Dimensional Structure Modeling in Tuo128 Block of Shengtuo Oilfield
- A Kind of New Switching Power Supply with Multiple Isolated Outputs Used in High-Voltage Static Synchronous Compensator
- Application of Generalized Predictive Control to a Peristaltic Pump
- The Research of the Stability of Rotation Super-Rice Seed Based on Single Axisymmetric Characteristics
- Comprehensive Evaluation for Safety Working Status of Hoisting Mechanism of Crawler Crane Based on 3-Scale AHP
- Research on Stochastic Finite Element Reliability Analysis Method of the Structure for the Truck Crane Boom
- Research on Integrated System Control Strategy of Regenerative Braking and Anti-Lock Braking System for Electric Vehicle
- Dynamic Characteristic Analysis and Experiment of Piezoelectric Vibration Table of Industrialized Precision Seeding Device
- Design and Research on Variable-Rate Fertilization Computer Control System
- Design and Experiment on Paddy Hydraulic Drive Variable-Rate Fertilization Device
- Modeling and Analysis of Brake by Wire System in Electric Vehicle
- The Iterative Method for Reliability Estimation of Fatigue Life
- Reliability Estimation of Fatigue Life for Machine Parts under Uniaxial Constant Amplitude Load
- Optimization of Two-Stage Closure Law of Turbine Wicket Gates and its Application
- Study on Fatigue Performance of Large Volume Seamless Steel Cylinder Served in CNG Hydraulic Daughter Station System
- Shape Optimization of High-Speed Train Pantograph Insulators for Low Aerodynamic Noise
- Discussion on Solving Systematic Matrix for Linear System of Invariant Time
- Numerical Simulation and Experiment of Motion of Rice Seed in Pneumatic Seed-Metering Device
- Analysis of Ring Compression Test for Determination of Friction Circumstances in Forging Process
- Research on Vehicle Chassis Integrated Control Technology Based on Coordination Strategy
- Research on Stochastic Stability of Wheelsets with Primary Suspension
- The Union Algorithm of Rolling Stocks’ Kinematic Envelope
- Vibra-Acoustic Characteristic Matching of Mini-Car Body Structure and Interior Acoustic Cavity in Low Frequency Range
- Thermal Analysis of Cold Plate for Motor Controller Based on Fluent
- The Optimum Windshield-Defog and Passenger-Comfort Methods of a Vehicle in all Seasons
- Design of a Cutting Point Control Algorithm for Five-Axis Machining
- Study on the Mechanical Characteristics of an Electrode Tab-Clamp for Lithium-Ion Battery Formation
- Heat Dissipation and Temperature Distribution of Brake Liner Using Steady State Analysis
- Application of Micro Capillary Groove Radiator to Electric Vehicle Power-Control Unit
- An Experimental Study on Cycle Performance of the Mobile Air Conditioner with and without Indoor Fan Operation
- A Comprehensive Approach for Resistance Spot Welding Quality Estimation Using Dynamic Resistance Based Model
- Research on Electric Weft Insertion Method for the Rapier Loom
- Novel Scanning Immersion Lithography for 3D Microfabrication
- Topology-Preserving Transformation Based on the Correspondence of Control Points Using Radial Basis Functions
- Stability Analysis and Numerical Simulation of the Conical Tower of the Wind Turbine
- The Practical Use and Method for Diagnosing Roller Axle Troubles on Site
- Analysis on the Finite Element of Electromechanic Coupling of Flexible Gear in Electromagnetic Harmonic Drive
- Multi-Axle Electro-Hydraulic Control Steering System Based on Servo Solenoid Valve
- An Analytical Study on Thermally Induced Vibration Analysis of FG Beams Using Different HSDTs
- Finite Element Resistivity Forward Modeling Using Algebraic Multigrid Preconditioned Conjugate Gradient Method
- Simulation and Experiential Research for Broken Conductor Load of Suspension Towers of UHVDC Power Transmission
- Chapter 3: Advanced Materials Science and Engineering
- Force Propagation of Flow of Granular Materials through an Orifice in Start up Stage
- Control Problems for the Models of Thermally and Electrically Conductive Viscous Fluid
- A Comparative Experimental Investigation of 3D Angle-Interlock Woven Composite between Quasi-Static Tension and Three-Point Bending Loading Conditions
- Finite Element Model Analysis of 3-D Angle-Interlock Woven Composite under Quasi-Static Tensile Loading
- Kinetic Study on Photopolymerization of TPGDA under Containerless Condition
- Development of Approaches to the Creep Process Modeling under Large Deformations
- Spectral Element Model for the PZT-Bonded Laminated Composite Beams
- Study on UV Curable Waterborne Polyurethane Modified by Epoxy Resin
- A Strain Sensing Structural Health Monitoring System for Delaminated Composite Structures
- Damage Detection of Filament Wound Composite Cylinder Using Ultrasonic Waves
- Constitutive Modeling of Flow Behaviour of AISI 4340 Steel under Hot Working Conditions
- Inhibition Effect of Sodium Molybdate on Friction Stir Weld of 5083 in Aqueous Solution
- Fracture Finite Element Analysis for Roll Forming of U Section Parts of TRIP 600 Steel
- Optimization of Elastic Supports for Laminated Composite Plates
- Research on Debonding Damage of Adhesive-Bonded Composite Integrated Structure
- Transient Plasma Ignition for Delay Reduction of Ethene-Air Mixtures
- Oxidation Behavior of Reheating Hot Work Die Steels
- A Study on Failure of Welded Lap Joints in Alloy 718
- An Analytical Modeling for Effective Thermal Conductivity of Multi-Phase Transversely Isotropic Fiberous Composites Using Generalized Self-Consistent Method
- Several Models for Piezoelectric Composites
- Microstructure of the Acid Welding Slag
- Leaching of Heavy Metals from Municipal Solid Waste Incineration (MSWI) Fly Ash Using Nitric Acid
- Leaching of Heavy Metals from Municipal Solid Waste Incineration (MSWI) Fly Ash Using Sulfuric Acid
- 3-D Elastic-Plastic Constitutive Relationship of Mixed Hardening
- Surface Plasmon Interference with Two-Slit Metal Structure
- The Investigation of Terahertz Metamaterials by Normalized Power Transmission
- Sintering Characteristics of Micro-Zn Paste Containing Sn-3.0Ag-0.5Cu Nanoparticles
- Fabrication of Spherical Bi Particles during Polyol Synthesis Using a Bismuth(III) Carbonate Precursor
- Investigation on Impact Performance of Light-Weight Composite Honeycomb Sandwich Panels
- Finite Element Analysis and Shape Optimization of Aluminum Alloy Automobile Energy-Absorbing Components
- Influence of Nanostructured Fibers on Properties of Building Composites
- One-Dimensional Temperature and Stress Distributions Associated with Hyperbolic Heat Conduction
- Nondestructive Reliability Monitoring of Zirconia Degraded under Hydrothermal Condition
- Research on the Pressure-Measuring Uncertainty of Standard Copper-Cylinder
- “Internal” Resistivity and Quantum Efficiency in Organic/Hybrid Solar Cells
- Interaction of High Power Laser with Carbon Doped PVC
- The Burst Tests and Theory Analysis of CFRP Pressure Vessel
- Humidity Sensing Property of Al-Doped Mesoporous Silica
- Chapter 4: Rock, Civil and Structural Engineering
- A New Method to Estimate Routine Based on the Motion Modes of Rockfall
- Simulation Research of Blasting Vibration Prediction with Cylindrical Dynamite
- Estimation of Ultimate Limit Statefor Stiffened-Plates Structures: Applying for a Very Large Ore Carrier Structures Designed by IACS Common Structural Rules
- Study of Civil-Plane High-Lift Model Using Omni-Tree Cartesian Grids
- Research on Modal Parameters Identification of Wing Structures with NExT-ERA
- Mutation Instability Model of Perilous Rock and Calculation Methods for Corresponding Dynamic Parameters
- Study on Wavelet Denoising of Pulse Impact Force of Non-Viscosity Debris Flow
- Monitoring and Analysis of Blasting Vibration of Diversion Tunnel Excavation in Layered Rock Mass
- Structure Analysis of Microbe-Repaired Concrete Using Scanning Electron Micrographs
- Structural Post-Fire Behaviour of the Steel I-Shape Beams-to-Cylindrical Columns
- Numerical Analysis of Anti-Impact Performances of the Reinforced Concrete Slab
- Numerical Simulation of the Rock Fragmentation Process Induced by TBM Cutters
- Experimental Investigation about Dynamic Bond-Slip between Reinforcing Steel Bar and Concrete
- Smoke Transport Calculation during a Wooden Residential Structure Fire
- Nonlinear Probabilistic Analysis of the Reinforced Concrete Structure Failure of a Nuclear Power Plant Considering Degradation Effects
- Study of the Three-Dimensional Global Limit Equilibrium Method Applied to the Stability of Rock Slope
- On Problems of Mechanical Properties of Structural Steel in Load-Carrying Structure of Historical Building Construction
- Study on the Physics and Mechanical Properties of Freeze-Thaw Soil and Undisturbed Soil
- Evidence Theory and Differential Evolution for Uncertainty Quantification of Structures
- The Application of an Immune Clonal Selection Algorithm Based on the Information Entropy in Truss Structure Multi-Objective Optimization
- Construction of Hazardous Waste Management
- Chapter 5: Control, Electronic, Automation Technology and Communication Engineering
- Microcontroller System for Oil Refinery Parameters Measurements Based on Piezoresistive and Strain Gauge Pressure Sensors
- High Precision Ultrasonic Ranging System for Mobile Robot Navigation
- Calibration of the Wireless Unit of Micromechanical Accelerometers
- Real-Time Identification and Tracking of Infrared Markers Based on Kalman Filter
- Automatic Integration of System-Level Design and System Optimization Based on SysML
- Integration of System-Level Design and Detailed Design Models of Mechatronic Systems Based on SysML and Step AP 203 Standard
- The EKF Senorless Control Strategy of Permanent Magnet Synchronous Motor Adaptive Backstepping Control System
- Conservativeness Judgement of Controller for Systems with Time-Varying Delay
- Significant Factors Identification for Particle Swarm Optimization Algorithm to Solving the Design Optimization Problem of a Four-Bar Linkage for Path Generation
- Design of PLC Timer System Based on ARM + FPGA
- Application of CNC Programming Technology in the during of Processing for the Key Parts of Disappearing Mould
- Joint Source and Relay Optimization of Multiuser MIMO Relay System
- Typical Product Cases Guided Engineering Graphics Teaching Reform for Communication Engineering Major
- The Forecasting of the Development of Home Automation
- The Design of Household Appliances Controller in Smart Home
- Research and Realize of High Availability in Femto Communication System
- Stability Analysis for Discrete-Time Markov Jump System
- Research on the Method for Intelligent Autonomous Vehicle to Distinguish the Road in Virtual Traffic Environment
- Embedded Micro Inertial Navigation System
- Development of Tool Inquiry System Based on Embedded RFID Middleware
- Speech Emotion Recognition Based on Mixed MFCC
- Design of a Multi-Thread Data Collection System
- Developing of Environmental Noise Control
- Chapter 6: Biomechanics Technology
- A New Dimension in the Study of Human Functional Joint Instability
- Optical-Tracker-Based 3D Reconstruction for Endoscopic Environment
- A Study on Image Representation Method Based on Biological Visual Mechanism
- Cloning of the High Alkaline Endoglucanase Gene from Bacillus pumilus AC-4 and Expressed in E.coli
- Biomechanical Analysis in Human Masticatory System
- Removed at authors request
- Characteristic Parameters of Surface Electromyography Signals of Cervical Muscles
- Modeling of Temperature in Orthopaedic Drilling Using Fuzzy Logic
Les mer
Produktdetaljer
ISBN
9783037855577
Publisert
2013-02-06
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
70 mm
Aldersnivå
P, UP, 06, 05
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1400