Advanced Materials Researches, Engineering and Manufacturing Technologies in Industry
Heftet /
2013
/ Engelsk
Produktdetaljer
ISBN
9783037858028
Publisert
2013-11-15
Utgiver
Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
58 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1150
Redaktør
Collection of selected, peer reviewed papers from the 2013 2nd International Symposium on Materials Science and Engineering Technology (ISMSET 2013), July 27-29, 2013 Singapore.
The 208 papers are grouped as follows:
Chapter 1: New and Advanced Materials and their Technologies;
Chapter 2: Micro/Nano Materials and Technologies;
Chapter 3: Manufacturing and Industry Engineering, Processes and Design, Geo-engineering Applications;
Chapter 4: Applied Mechanics;
Chapter 5: Control and Automation, Fault Diagnosis;
Chapter 6: Information Technologies and Networks Engineering, Computational Methods and Management.
Les mer
Selected, peer reviewed papers from the 2013 2nd International Symposium on Materials Science and Engineering Technology (ISMSET 2013), July 27-29, 2013 Singapore
- Preface and Organizing Committees
- Chapter 1: New and Advanced Materials and their Technologies
- Direct Synthesis of Titanium Phosphates Functionalized Ordered Mesoporous Materials (SBA-15)
- Research on Application Performance of Surface Anti-Corrosion Technology of Corrugated Steel Beam Guardrails
- Structure of Ni80Fe20 Films Deposited on SiO2/Si(100) by Direct Current Magnetron Sputtering System with the Oblique Target
- Microstructures and Properties of AISI 304L Stainless Steel Irradiated by High-Current Pulsed Electron Beam
- Multi-Channel Metamaterial Sensor Based on Split Ring Resonator
- Electrochemical Investigation of the Adsorption Behaviour of Guanine on Copper in Acid Medium
- Microstructure Evolution of 2024 Aluminum Alloys Subjected to Thermal Cycling in Simulated LEO Space Environment
- Tris (2, 2, 2-Trifluoroethyl) Phosphate (TFP) as Flame-Retarded Additives for Li-Ion Batteries
- Preparation and Characterization of Activated Carbon from Palm Shell by Catalytic Activation with Steam
- Study on the Preparation and Particle Size Control of Silica Sphere in a Sol-Gel Process
- Synthesis of Spherical LiFePO4/C Composites as Cathode Material of Lithium-Ion Batteries by a Novel Glucose Assisted Hydrothermal Method
- An Investigation on Surface Sol-Gel Silica Film
- Research on Non-Linear Power Coal Blending Model and its Algorithm
- Efficacy of Resinous Polypropylene (PP) Fibers on Strength Behavior of Reinforced Soils
- Effects of Magnesium on Inclusions in Consumable Electrode of H13 Die Steel
- Structural and Electrical Properties of Network Ni Films Sputter-Deposited at 300 K and 573 K
- Technical Economic Analysis of Bioethanol
- Mixed-Template Molecularly Imprinted Technique and its Application Research
- Wood-Based Panels’ Properties when Subject to Temperature and Humidity Variation
- Potentials and Limits of Oxidative Photocatalysisand Possible Applications in the Field of Cultural Heritage
- Adsorption of Organic Substances on Modified Montmorillonite, Cloisite 10A, 15A, 20A, 25A, and 30B
- The Removal of Rubber Particles from Skim Rubber Latex by Batch Adsorption Technique Using Organoclay
- Compressive Strength Prediction of T300/QY8911 Composite Subjected to Moisture and Temperature Environment Condition
- Lightweight Concrete Incorporating Waste Expanded Polystyrene
- Investigation of Ultrasonic Effects in Cotton Dyeing Processing
- Rapid Thermal Annealing on GaSb Thin Films Grown by Molecular Beam Epitaxy on GaAs Substrates
- Polycalixresorcinarenes as Solid Polyelectrolytes
- The Effect of Additives on the Microstructure and Properties of BaTiO3 Ceramics
- Studies of Preparation and Stability of Liposomes Formed by 1,1'-[(3,5-didodeciloxycarbonyl-4-phenyl-1,4-dihydropyridine-2,6-diil)-dimethylen]Bispyridinium Dibromide
- Comparison of Spectrophotometry, FAAS and ICP-OES Methods for the Determination of Trace Iron in Solar Glass
- The Effects of Depositing Sn-Ag-Cu-S Systems at Different Temperatures on Silver Substrates
- Mutation Analysis of a Thermostable Exo-ß-D-Glucosaminidase from the Hyperthermophilic Archaeon Pyrococcus Horikoshii and Comparison with Two Mesophilic Exo-ß-D-Glucosaminidases
- Disk-Shaped Colloids: The Synthesis and Applications of ZrP Crystals
- Catalytic Pyrolysis of Rice Husk via Semi-Batch Reactor Using L9 Taguchi Orthogonal Array
- Synthesis and Characteristics of Thermo-and pH-Sensitive PNIPAAm/PVP Hydrogels
- Preparation and Properties of Emulsion Type Sizing Agent for Carbon Fiber
- A Fatigue Life Prediction Method for Composite Lamina
- Synthesis and Crystal Structure of (1E,2E)-1,2-Di (-3-Nitrobenzylidene) Hydrazine under Micromave Irradiation
- Synthesis and Crystal Structure of 9,9-Dipropionitrilefluorene
- Effectiveness of some Nonionic Surfactants As Corrosion Inhibitors for Carbon Steel in Hydrochloric Acid Solution
- Investigation of the Inhibitive Effect of Hexatriethanolamine Derivatives on Corrosion of Carbon Steel Pipelines in 1M HCI
- Improving Oil well Cement Slurry Performance Using Hydroxypropylmethylcellulose Polymer
- Preparation of PEI Ultrafiltration Membrane with Excellent Thermal Resistance
- Effect of Holding Time on the Microstructure of Mg-3Si-1.70Sn Alloy during Semisolid Isothermal Heat Treatment
- Molecular Docking Studies Involving Transitional Metal Complexes (Zn(II), Co(II), Cu(II), Fe(II), Ni(II) with Cholic Acid (AC) as Ligand against Aurora A Kinase
- Synthesis and Characterization of well Defined Polychloroprene by RAFT Polymerization
- Effect of Selective Solvents on Self-Assembly of Cationic Amphiphilic Triblock Copolymers Q-PVBC-b-PS-B-Q-PVBC
- Alkali-Activated Matrix Based on Metakaoline with Lightweight Aggregate
- Microstructural Refinement of Pure Copper by Friction Stir Processing
- Effects of Variations in Annealing Temperature and Annealing Time on the Spectral and Solid State Properties of Nickel Oxide (NiO) Thin Films
- Strain Induced Anomalous Magnetic Ordering in Epitaxial TbMnO3 Thin Films
- A Comprehensive Research to Find Suitable Acid for Sandstone Acidizing
- Optical Characterization of Novel Crystal Na5Bi (WO4)2(MoO4)2 :Yb3+
- Effect of Milling Time on Mechanical Properties of Fly Ash Incorporated Cement Mortars
- ZnS-Intercalated Montmorillonite: A Low Cost Potentiometric Sensor
- Influence of Vacuum Cathodic Arc Etching on Structure and Properties of W-Doped DLC Films
- Theoretical Study on Thermal Hazardous Properties of C18H10O11 and C18H18O7 Organic Peroxides
- Equibiaxial Extensional Viscosity and Network Formation of Wheat Gluten - Xanthan Gum Dough
- Characterization of Kevlar Fiber-Reinforced Absorbing Composites
- Use of a Dielectric Glass to Join Dielectric Ceramics for Microwave Filters
- Mathematical Model of Agar Gels Rheological Behaviour in Transient/Steady State
- Functional Vibro Pressed Pavement with Ecological Benefits
- Hot Carrier Energy and Energy Relaxation Length in a-Se Photoconductive Target
- Drift Velocity of Hot Carriers in a-Se Photoconductive Target
- Interface Layers of Ag-Al Fusing Metals by Casting Processes
- Microstructure and Mechanical Properties of Friction Stir Welded Annealed Pure Copper Joints
- Experimental Investigation of Notched CCF300/QY8911 Composite Laminates Subjected to Tension Load
- Data Mining of Nicotine Demethylase Genes in Modern Tobacoo
- Chapter 2: Micro/Nano Materials and Technologies
- Formation of Surface Nanoaustenite and Properties of 3Cr13 Steel Induced by Pulsed Electron Beam Irradiation under Melting Mode
- Charge Trapping Properties of Au Nanocrystals with Various Sizes for Non-Volatile Memory Applications
- Structure and Magnetic Properties of the Co-Ni Alloy Nanowires Prepared by AC Electrodeposition
- Structure of Composite Biocompatible Titania Coatings Modified with Hydroxyapatite Nanoparticles
- The Preparation of High Quality CIS Films by Spraying Citrate-Capped Cu11In9 Alloy Nanoparticles Ink and RTP Process
- The Magnetic Properties of FeCoNbB Nanocrystalline Films
- Catalytic Reaction-Nanogold Resonance Rayleigh Scattering Method for the Determination of Trace Tellurium
- Resonance Rayleigh Scattering Spectral Determination of Se Using NaH2PO2 as Reducer
- Resonance Rayleigh Scattering Determination of Trace Hemin Basing on Aptamer-Modified Nanogold Catalysis of HAuCl4-Vitamine C
- Effect of Silver Coating on Barium Titanium Oxide Nanoparticle Toxicity
- Study on the Composites Epoxy Resin/Nano-TiO2/Polyester
- Review of Mechanical Properties and Durability of Concrete Containing Nano-Particles
- Electrochemical Synthesis of CdS on Multi Walled Carbon Nanotubes Paste Electrode
- Measurement of Trap Stiffness of Holographic Optical Tweezers with Power Spectrum Method
- Synthesis and Characterization of Zinc Oxide Nanowires Grown Hydrothermally on Glass Substrate
- Fabrication, Characterization and Drug Release Property of Protein Encapsulated Emulsion Electrospun Nanofibers
- Chapter 3: Manufacturing and Industry Engineering, Processes and Design, Geoengineering Applications
- Numerical Research on Mooring System of Wave Measuring Buoy
- Casting Mold Designing for Double-Chamber Throttle Valve
- Heat Treatment Process and Optimization of Shooting Nails
- 3D Dynamic Simulation and Optimization of Mammoth Desiliconization Converter for High-Quality Stainless Steel
- Design of Double-Layer Copper Sheet for RFID Tags Antenna
- Study on the Reverse Designing for Engine's Cylinder Head
- Feasibility Study on Applying a Single Loop-Based Vehicle Detector
- Improvement of Detection Method and Power Supply Device of Vehicle Detector
- Numerical Simulation of Aircraft over Run Arresting System
- Small Module Design of Ball Mill Main Drive Gear with Φ2.4×10m
- Effect of Increasing Rudder Deflection on Rudder Inflow for LNG Vessel in Shallow Water
- CDTAs Based Current-Mode Universal Biquad Filters with Orthogonal Control of Quality Factor and Pole Frequency
- Research on Analysis of Linear Texture
- An Experimental Study on the Correlation between Spray Dispersion Area and Tip Penetration Using an Edge Detection Technique of Images Captured from Highly Pressurized Cr-Di Fuel Injection
- Preparation and Characterization of Nickel-Based Anode-Supported SDC Half Cell by Tape Casting, Laminating and Co-Sintering
- The Design and Implement of Acquisition and Recording System for Pulse Radar
- Design and Simulation of Servo System of Based on Kalman Filter
- New Progress of Ship’s Increment Resistance in Waves
- Study on Geometry Filtering Phenomenon and Flexible Car Body Resonant Vibration of Articulated Trains
- Modeling and Optimization of Hiper Strut Suspension Based on Adams
- Economic and Environmental Analysis for Steam-Driven Induced Draft Fans of 1036MW Ultra Supercritical Units
- CAD Analysis of Mechatronic Device Used for Orthopaedics
- Finite Element Analysis and Experiment Research on Machine Tool Cutting Force Error
- Design of Pitch Curve of Internal-Curved Planet Gear Pump Strain in Type N-G-W Based on Three-Order Ellipse
- Study on Molding Processing Method of New Type Shotcrete Machine Helical Blade
- Conflict Modeling and Analysis of Agent Federation-Based Rapid Design for Electric Motor
- Hertzian Contact Analysis of Ceramic/Metal Functionally Graded Coating
- Influences of Machining Parameters on Electrode Wear in Piezoelectric Self-Adaptive Micro-EDM
- Study on Application of CAE in a Centrifugal Compressor Impeller
- Carrier-Diffusion Wave and Thermal Wave in a Semiconducting Microcantilever Generated by Optical Excitation
- Exploration of Specialty Talents Training Program for Measuring and Control Technology and Instrumentation with the Core Features of Detection Technology
- Operating Analysis and Data Mining System for Power Grid Dispatching
- Research on Sedimentary Microfacies of Sandstone Group I in Putaohua Oil Reservoir of Gu83 Block in Gulong Oilfield
- Seepage Stability Analysis for Surrounding Rock Mass of Diversion Tunnel by FEM
- Study on Power Loss in Transformerless Grid-Connected Inverter
- Analysis of Rail Traffic Measured Vibration Based on Hilbert-Huang Transform
- Application of Hartmann Acoustic Generator in Source of Underwater Pyrotechnic Combustion
- A Kind of Convenient Method for Testing Strength of Combined Tubing String
- The Research on Sequence Stratigraphy of Shahezi Formation in Xujiaweizi Depression
- Temperature Distribution and Polarization Curve Sensitivity in the Proton Exchange Membrane Fuel Cell Single Cell
- Study on Volcanic Facies of Yingcheng Formation in Yaoshen Area
- Analysis on the Reservoir Heterogeneity of North Lake Oilfield under Jurassic Badaowan Formation
- Numerical Modelling of the Thermal Process in the Aquatic Environment
- Polarization Configuration and Control Method of Micro-Raman Spectros Copy for in-Plane Strainmeasurement by Using Carbon Nanotube Sensor
- Internal Energy of the Non-Spinning Black Holes
- Study of Influence of Fans Arrangement to Offshore Platform Noise
- The Temperature Field Distribution in Thermal Recovery and the Study on Residual Oil Distribution Laws
- Analysis of Magnetic Field in Dry-Reed Relay Application Circuit
- The Effect of Piston Skirt Profile on EHD Lubrication in an Internal Combustion Engine
- The Role of Wind on Double Skin Facades in High Rise Office Building
- The Types of Sedimentary Facies and Rock Characteristics of Xujiaweizi Fault Depression in Songliao Basin
- The Influence of Microscopic Pore Structure on Microscopic Residual Oil in Sandstone Reservoir
- Filter Technology in the Switching Power Supply
- Analysis of Energy Efficiency in Construction Solutions at the Façade-Slab Connection
- Designing a BSC Knowledge-Based Strategic Planning System
- Chapter 4: Applied Mechanics
- Morphology Analysis of Mixed Mode Fatigue Crack Growth in a Low Alloy Steel
- Statistical Analysis on Shear Wave Velocity of Soils in Bohai Gulf
- Peak-To-Peak Change in Magnetization Caused by Fracture
- Numerical Simulation Analysis of the Effect on the One-Dimension Assumption in Different Diameter SHPB Pressure Bar by Two Kinds of Loading Waveform
- Three Kinds of Gear Transmission Nonlinear Dynamics Models
- Seismic Tests on RC Building Exterior Joints with Wide Beams
- Research on the Resistance Acting on the Bucket during Shovelling
- Analysis of Pitch Curve of Internal-Curved Planet Gear Pump
- Numerical Analysis of Thermoelastohydrodynamic Behavior of an Elliptical Tow-Lobe Bearing
- Effects of Concentration and Temperature on Rheological Properties of Mixture of HPMC and CMC Solutions
- Damping Induced from the Interaction between a Vibrating Cantilever and its Surroundings
- Random Vibration Analysis of Rivets on Payload Structure
- Analysis and Research of Luo River Inverted Siphon Structure
- Simulation Analysis for Homogeneous Earth Dam of Qijiadian Reservoir
- Simulation Analysis of Bridge-Type Reinforced Concrete Inverted Siphon
- Three-Dimensional Finite Element Analysis of Clay Core Wall Earth Dam
- Fatigue Test Studies on Reinforced Concrete Hollow Slab Girder
- RC Beam Bridge’s Fatigue Cumulative Damage Rule Research
- Chapter 5: Control and Automation, Fault Diagnosis
- An Inproved GA and its Application to DRP
- Fault Location Based on Artificial Bee Colony Algorithm for Distribution Network with Distributed Generators
- T-S Fuzzy Model Establishment and Control of Discrete Chaotic System
- Adaptive Back-Stepping Control for Wheeled Robot with Uncertainty
- Reading Process of Integrated Circuit Layout Debugging: Evidence from Eye Movements
- Research on Control Method of Grid-Connected Inverter Suppressing Grid-Voltage Background Harmonics
- Design of the Centralized Control Circuit for Large Ship Borne Squid Jigging Machine
- Design of an Adaptive Neural Network Controller for Robot Manipulators
- Fault Diagnosis of Grounding Grid Based on Principal Component Analysis and Fuzzy Clustering
- Speed Ratio Control Study on CVT with Electrical Control and Motor as Actuator (EM-CVT)
- Exponential Stability Criteria for Neutral System with Mixed Time-Varying Delays and Nonlinear Perturbations
- Optimization of Level Set Segmentation with Nonlinear Coherent Diffusion
- Fault Section Location in Distribution Network with DG Based on Voltage Sag Correlation Coefficient
- Fault Diagnosis for Grounding Grids Based on Genetic Algorithm and Support Vector Machine
- Effect of Poles to the Automatic Control System
- Dynamical Behaviors of Stochastic Reaction-Diffusion Hopfield Neural Networks
- Linear Capacity and Heuristic Algorithms for Multicommodity Flow in Computer Networks Engineering
- A Region-Growing Adaptation-Based Algorithm for the Smart Detection of Remote Sensing Images
- H∞-Based LQR Control for Flexible Air-Breathing Hypersonic Vehicles with Pole Placement
- Method of Detection for Complex Surfaces Based on Industrial Close-Range Photogrammetry
- 3D Measurement of Anatomic Parameters and Development of a Digital Design to Improve the Outcome of Lower-Extremity Surgery
- Fault Locating of Grounding Grids Based on Extreme Learning Machine Elman Neural Network
- Study on the Method of Radar Servo System Faults Diagnosis Based on Expert System and Neural Network
- Facial Diagnosis of Chinese Medical Syndromes of CHB and its Correlation with Liver Function
- Chapter 6: Information Technologies and Networks Engineering, Computational Methods and Management
- Rescheduling Problems with Deteriorating Jobs to Minimize the Tardiness Costs under Time Disruptions
- Research and Implementation of Time Synchronization Protocol Based on the ZigBee
- CANbus Hybrid Scheduling Algorithm Based on DMS and EDF
- The Allocation and Statistics of Quota of Teaching-Practicing Normal Graduates: Based on Excel Built-in Function and VBA
- Differences in the Usage of Information Systems Applied by the German and Hungarian Micro-Enterprises
- Game Analysis on the Shareholders, the Manager and the Auditor in Equity Incentive Process
- Selection of Engineering Management University Internship Projects Based on Fuzzy Analytic Hierarchy Process
- The (G'/G,1/G)-Expansion Method for Solving the (2+1)-Dimensional Breaking Soliton Equations
- Wireless Sensor Network Platform Based on STM32
- How to Identify the Real Requirement of Consumers
- Single Machine Scheduling with Discretely Compressible Processing Times
- An Efficient Image Retrieval Based on Combined Features
- Research on Passenger Information System Based on Train Security Detection Sensor Network
- The Vegetable Quality and Safety Traceability Model Research in China
- An APIT Algorithm Based on DV-HOP Multi-Hop
- An Improved DV-HOP on Weighted and Distributed Calculation Method
- Energy-Efficient Routing Protocol on Mobile Sink in Wireless Sensor Network
- Design and Implement an iOS-Based M-Learning Platform for University Students
- Optimal Locating of Misbehavior Node in Wireless Sensor Network
- A Model of Three Points for Location Estimation in Wireless Sensor Networks
- Determinants for Product and Process Innovation: A Review in the Perspective of TQM Practices
- Extended Mapping Approach and Exact Solutions for a (1+1)-Dimensional Benjamin-Boma-Mahony Equation
- A Numerical Framework for Free Surface Flow and Wettability Based on Arbitrary Lagrange-Eulerian Method
- Bending Response of Exponentially Graded Plates by a Meshless Method
- Imputed Estimation For Varying Coefficient Models with Missing Covariates
- Attractor and Invariance of a Class of Chaotic Dynamic Systems
- Training Sequence Design Based on Channel Estimation
Les mer
Produktdetaljer
ISBN
9783037858028
Publisert
2013-11-15
Utgiver
Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
58 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1150
Redaktør