International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications Selected, peer-reviewed papers from the International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC 2021), May 10-14, 2021, Vienna, Austria

PrefacePlenaryRecent Developments in the Processing of Advanced Materials Using Severe Plastic DeformationKeynotesAchieving Superplasticity in Fine-Grained Al-Mg-Sc AlloysImprovement in Mechanical Performance of Biomaterial Ti Alloy by Controlling Volume Fraction of Martensite PhaseAdditive Manufacturing of Ti6Al4V with Wire Laser Metal Deposition ProcessModel Description of the Unusual Temperature Dependence of the Viscosity of Metallic Glass-Forming LiquidsMechanical Stress Issues of La0.6Sr0.4Co0.2Fe0.8O3-δEffects of Al, Si and N Content on the Formation of M-A Constituent and HAZ Toughness of Ti-Containing Low-Carbon SteelGrain Orientation Spread in Dynamically Recrystallized Austenitic SteelEffect of the Morphology, Size, Distribution and Homogeneity of Carbides and Matrix on Wear Resistance in High Cr-Alloys White Cast IronFriction Stir Welded AISI 304 Metal Sheets for Application in Food ImplantsThe Use of Transient Liquid Phases in Powder MetallurgyAustenitic Grain Size Effect on the Phase Transformation of a 7.0% Cr Steel for ForgingEvolution of Carbides during Prestrain and TemperingDetonation Spraying of Metal Carbides CompositesHow to Master Interfaces in MMCs with Reactive ConstituentsSynchrotron 3D μ-Tomography of Porosity during Hot Isostatic Pressing of a Single-Crystal Nickel-Base SuperalloyEvaluation of Cu-Ni-Based Alloys for Thermoelectric Energy ConversionMechanical and Thermal Properties of Harmonic Structured Composites by MM/SPS ProcessTime-, Temperature- and Frequency-Dependent Viscoelastic Properties of a Curing Epoxy AdhesiveFatigue Behavior of Age-Hardening Cu-6Ni-1.5Si Alloys with Different Grain SizesProcessing Strategies for Hot-Rolled Medium-Mn SteelsDevelopment and Characterization of New Ti-25Ta-Zr Alloys for Biomedical ApplicationsEffect of Microshot Peening on Fatigue Strength of Austenite Stainless SteelMechanical Properties of Interface Layers in SiC/TiAl CompositeInferences of Baking Time on Hydrogen Embrittlement for High Strength Steel Treated with Various Zinc Based ElectroplatingInfluence of Substitution of Fe by Mo on Heat Treatment Behavior in Ti-Mo-Fe AlloysLayer-Thickness Dependence of Hardness and Local Bucking Behavior in Electrodeposited Ni-Co-Cu/Cu Multilayered FilmsHardness Development of Mechanically-Bonded Hybrid Nanostructured Alloys through High-Pressure TorsionEnergy Absorption of Additively Manufactured Porous Metals with Disordered CellsExperimental Characterization and Modelling of the PLC Effect in an AlMg-AlloyInfluence of Strain-Hardening and Dynamic Recovery on DDRX Steady StateUltrasonic Processing of Magnesium Alloy for Property EnhancementComputer Prediction of Phase Fraction in Multipass Weld of Duplex Stainless Steel - Proposal of Microstructural Improvement Welding Process -Effect of Particle Morphology on Thermal Properties of TiB2 Particle Dispersed Pure Aluminum CompositesDevelopment of New Particle Method Based on MPS and its Applicability for Friction Stir Welding of Dissimilar JointContributionsCorrosion Resistance of Additive Manufactured Titanium Alloy Parts: The Effect of Recycled PowdersPL Properties of (Ba, Ca)2( Si, P)O4: Eu Synthesized by Various Annealing and Cooling ProcessMicrostructural Prediction of Heat Treated Steel Forgings for Severe ApplicationsInfluence of Elastic Modulus of Matrix on Conductivity of VGCF Dispersed in Plastic MatrixStudy of the Impact of the Synergic Line and the Strategy of Conception on Ti-6Al-4V Wire Arc Additive Manufacturing Process (WAAM-CMT)Thermomechanical Processing without Accelerated Cooling to Achieve an As-Rolled Yield Strength of 400MPa in C-Mn Steel Plate15/15 Ti Stainless Steel Welding Process Optimization for GEN IV Nuclear Application in the GEMMA Project FrameHigh Cycle Fatigue Behaviour of Cu/Sn Intermetallic Compounds Prepared by Transient Liquid Phase Bonding ProcessThermal and Magnetic Properties of Ternary Fe-B-C and Quaternary Fe-B-C-Si Alloys with High Glass-Forming Ability and High MagnetizationAdaption of 3D Printing for Rapid ToolingHigh Purity Magnetite Microparticles Directly Derived from Mill Scale via Hydrogen-Reduction MethodFracture Behavior of an AlMgMnSc Alloy at Different TemperaturesMulti-Scale Characterization by Neutronography and Electron Diffraction of Ni Coating on Cu-Ni-Al or Cast-Iron Glass Molds after Laser CladdingDesign Solutions from Material Selection for Rib FixatorsEffect of Distance along the Built Axis on Mechanical Properties and Microstructure in Al10SiMg SLM AlloyMartensitic Transformation and Damping Behavior of Fe-Mn-Nb Damping AlloysHot and Cold Deformation Behaviors and Microstructure Evolutions of Mn18Cr18N Austenitic Stainless Steel with High-NitrogenMicrostructure Evolution in an Advanced High Strength Steel under Continuous CoolingThermal Stability of Ultrafine-Grained Pure Titanium Processed by High-Pressure TorsionStudy on the Effect of V Microalloying on Earthquake Resisting High-Strength Reinforcing Bar SteelsChange of Microstructure and Analysis of Fracture of the Ti-50.8 at.% Ni Alloy in the Ultrafine-Grained State after Multiple Martensitic Transformations with a Large Number of CyclesEffect of Different Production Processes on Metallic Composite Phase Change Materials for Thermal Energy StorageExtended Model for Prediction of Transition from Internal to External Oxidation in Steels: Comparison between Analytical/Semi-Analytical and Numerical ApproachesChallenges in Printing Certified Additive Manufactured Material: Ensuring Process Stability and Material QualityInfluence of Mn and Ni on Austenite Stabilization during a High Temperature Q&P TreatmentChanges in Mechanical and Microstructural Properties of Magnesium Alloys Resulting from Superimposed High Current Density PulsesRevisiting the Ostwald Ripening: A Discrete Model Based on Multiple Pairwise InteractionsMechanical Properties of Selective Laser-Melted Components of Alsi10mg for Prototype VehiclesThe Isothermal Oxidation of MCrAlY Protective CoatingsDelamination of Pearlitic Steel Wires: Role of Strain Partition on Mechanical Properties of Pearlitic WiresEvolution of the Microstructure and Mechanical Properties of the Ultrafine-Grained VT8M-1 during Isothermal Die Forging and Thermal TreatmentStatistical Errors in X-Ray Triaxial Stress Analysis by Cos α MethodThermal Stability of Retained Austenite in Advanced TRIP Steel with Bainitic Ferrite Matrix for Automotive Industries3d Printer Heads for Extrusion of Biologicals GelsInfluence of Surface Roughness on the Corrosion Behaviors of DP590 SteelHot Stamped Aluminium for Crash-Resistant Automobile Safety Cage ApplicationsPerformance of Vibration Power Generators Using Single Crystal and Polycrystal Magnetic Cores of Fe–Ga AlloysBiocompatibility of Anodized Low-Cost Ti-4.7Mo-4.5Fe AlloyEffect of Thermomechanical Treatments on the Mechanical Properties of New Low-Cost Ti-Fe-Nb-Zr AlloysTailored Liquid Phases for Enhanced Sintering of Advanced PM - SteelsAging Response in Selective Laser Melted AlSi10Mg Alloy as Function of Distance from the Substrate PlateFracture Toughness and Fatigue Crack Growth Characteristics of UFG Microalloyed and IF Steels Processed by Critical Phase Control Multiaxial ForgingThermal Barrier Coatings for Molybdenum Produced Using NanopowdersIncreasing Hardenability and Hardness of Quenching and Tempering Alloys by Substituting Chromium with ManganeseMulti-Class Grain Size Model for Forged Alloy 718 Aircraft PartsNon-Vacuum Fabrication of Bandgap-Controlled CZTGS Alloy Films Using CZTS+CZGS Mixed Nanoparticle InksTensile Deformation Behavior of Magnesium Single Crystals with Different Yttrium ConcentrationsBrazing of Stainless Steel Using Electrolytic Ni-P Plating Film and Investigation of Corrosion BehaviorShear Banding in Rotated Goss Grains and its Effect on the Formation of Cube Texture in Non-Oriented Electrical SteelMicromechanical Simulation Approach of Dual Phase Steel Artificial Microstructure Using Random Field ModelOrthotropic Behaviour of Magnesium AZ31 Sheet during Strain LocalizationMicrostructure and Tensile Properties of Sn-Ag-Cu-In-Sb SolderIron Carbon Masteralloy as Sintering Activator for Low Alloy Powder Metallurgy SteelsQuantitative Detection of Hydrogen Gas Release during Slow Strain Rate Testing in Aluminum AlloysEffect of Compressive Residual Stress on Film Formed by Mechanochemical Multifunction Cavitation ProcessingGrain Refinement of Fe-X Alloys Fabricated by Laser Powder Bed FusionThe Influence of Introduced Strains on the Exfoliation Corrosion Behavior of Mg-14mass%Li-1mass%Al AlloyCorrosion Resistance of Mg Alloy with High Zn Concentration Including Impurity CuOptimization of Slab Edge in Roughing of Stainless SteelOrientation AnalysisParametric Study of Pulse Arc Welding (PAW) and Laser Beam Welding (LBW) Techniques for Electrical Vehicle Battery CellsPost-Fire Performance of Square Concrete-Filled Steel Tube Columns under Uni-Axial LoadPromising Bendability of a New As-Rolled Medium-Carbon, Low-Alloy Steel with Isothermal Upper and Lower Bainitic MicrostructureStudy on Forging Permeability of 06Cr19Ni9NbN Steel during Hot DeformationInfluence of Chromium and Niobium on the Press-Hardening Process of Multiphase Low-Alloy TRIP SteelsOptimising Computational Fluid Dynamic Conditions for Simulating Copper Vertical CastingImprovement on Impact Toughness of Cold Formed S420 Steel by Direct QuenchingEffect of Cooling Rate below Ms Temperature on Hydrogen Embrittlement of TRIP-Aided Martensitic SteelsInvestigation of Temperature Evolution and Flash Formation at AA5083 Studs during Friction SurfacingMicrostructure and Precipitation Studies of Gas Tungsten Arc Welded Haynes 282 SuperalloyCarrier Concentration of CeFe2Al10 as a Candidate of Thermoelectric MaterialEffect of Alloying Element on Mechanical Properties of High Strength Austenitic SteelMagnetic and Mechanical Properties of Fe-Cr-Si-Mo Alloys by MIM ProcessStructural Changes in Multi Principal Element Alloys in Dependence on the Aluminium ContentShape Memory Properties of Ti-Ni Shape Memory Alloy / Shape Memory Polymer Composites Using Additive ManufacturingTemperature Increase during Isothermal Forging of Ti-5Al-2Sn-2Zr-4Cr-4Mo Alloy Using a 1500-Ton Forging PressSynthesis PbFCl-Type Mixed Anion APX(A=Hf, X=S, Se) Superconductors Related with Topological Materials by High-Pressure TechniqueAnalysis of the Strain Distribution and Texture Measurements in Asymmetric Rolling (AR) and Asymmetric Accumulative Roll Bonding (AARB)Effect of Heat Treatment on Structure and Properties of Martensite Stainless Steel for Ice-Class Ships Obtained by Direct Laser Deposition MethodMicrostructure and Tensile Properties of TRIP-Aided Steel Sheet Subjected to Hot-Rolling and AustemperingFabrication of Three-Dimensional Microstructure Film by Ni-Cu Alloy Electrodeposition for Joining Dissimilar MaterialsReaction Sintering of Tial Intermetallic CompoundComprehensive Phase Field Study on Directionally-Solidified MoSi2/Mo5Si3 Eutectic AlloyElectron Beam Melting: From Shape Freedom to Material Properties Control at Macro- and MicroscaleTemperature-Dependent Mechanical Stability of Retained Austenite in Thermomechanically Processed 3Mn SteelMicrostructure and Mechanical Properties of the UFG Magnesium Alloy Mg-1%CaEffect of Microstructure on Joint Strength of Fe/Al Resistance Spot Welding for Multi-Material ComponentsSevere Plastic Deformation of Copper, Binary Cu-Zn Solid-Solution Alloys, and High-Strength Brass by High-Pressure TorsionStructural Characterization of a Biogenic Secretion Extracted from the Tendon or Ligament in Rabbits for Artificial Ligament FormationEnhancing High-Temperature Creep Resistance of In Situ TiAl-Based Matrix Composite by Low Volume Fraction of Ti2AlC ParticlesImpact of Microstructural Anisotropy of As-Cold-Sprayed Cu Deposits on its Annealing EffectPerformance of 14Cr ODS-FeCrAl Cladding Tube for Accident Tolerant FuelAnalysis of the Applicability of Effective Thermophysical Properties to Composite Phase Change MaterialsLong Term Stability Evaluation of Stress Improvement Effect on Ni-Based Alloy Welds by Various Residual Stress Improvement MethodsInhomogeneous Microstructure and its Thermal Stability of AlSi10Mg Lattice Structure Manufactured via Laser Powder Bed FusionStudy of Nb Solubility in Hot Charging ProcessCold Spraying of IN 718-Ni Composite Coatings: Microstructure Characterization and Tribological PerformanceDefect Reduction and Quality Optimization through the Modelling of Plastic Deformation and Metallurgical EvolutionGrain Boundary Engineering of Strain-Annealed Hastelloy-XModelling of Cyclic Delamination Behavior of Thin Multilayered Structures Using Gradient Elasticity and Damage AccumulationEffects of Activated Carbon Counter Electrode on Bifacial Dye Sensitized Solar Cells (DSSCs)Dynamic Recrystallization Mechanisms of Nickel Niobium Alloys during Hot WorkingEffect of Stress Gradient on Heat Cycle Fatigue Life Prediction of Solder Joints by Repetitive Bending TestEffect of Strain Rate on the Microstructure and β-Texture Evolutions in β-Processed Forging of a Near-β Titanium AlloyAdditive Manufacturing of Multi Layered Bioactive Materials with Improved Mechanical Properties: Modelling AspectsNickel Supported Modified Zirconia Catalysts for CO2 Methanation in DBD Plasma Catalytic Hybrid ProcessPhysical Modelling of Strain Induced Roughness of Copper Wire during Dieless Drawing ProcessEffect of Hot Processing on Mircrostructure and Properties of Flat Billets of TA15 Titanium Alloy In Situ Observation during Copper Alloy Brazing Using an X-Ray SystemActivities of Non-Basal Slips in Rolled Mg-Li and Mg-Ce Alloys SheetsCreep Resistance of Ultrafine-Grained VT8M-1 AlloyThe Domain of Portevin-Le Chatelier Effect in Al-3Mg AlloyThe Effect of Hydrofluoric Acid Concentration in Sulfuric Acid-Based Desmutting Solution for Aluminium AlloysInfluence of Hot Pressing Sintering Temperature on the Properties of Low-Density Al0.5NbTa0.8Ti1.5V0.2Zr Refractory High-Entropy AlloyStrain Rate Dependent Mechanical Stability of Retained Austenite in Hot-Rolled Medium-Mn Sheet SteelsExtra-Hardening of SPD-Processed Al-Mg Alloy with Minimum Grain SizesImproving Mechanical Properties of Twin-Roll Cast AZ31 by Wire RollingMechanical Behaviour of Beta Titanium AlloysPreliminary Development of Cold Spray Procedures for Nickel Aluminum Bronze Casting RepairHigh-Temperature Tribological Properties of ReB2-Based Ceramic/Si3N4 Sliding PairsEffects of Retained Austenite Conditions on the Ductility of the Advanced High Strength SteelsSolid State Amorphization and Alloy Parameters for High Entropy AlloysCorrosion Resistance Evaluation of a Stainless-Steel Brazed Joint in HCl SolutionStress Ratio Effect on Fatigue Crack Initiation Mechanism of Magnesium Alloy AZ31Applications of Smart Material of Li2O-(Nb/Ta)2O5-TiO2 Solid Solution Having a Unique Periodical StructureCrystal Orientation Relationships among Acicular Ferrite, Oxide and the Austenite Matrix in a Steel Weld MetalFTMP-Based Kink Deformation and Strengthening Mechanisms for Mille-Feuille StructuresInfluence of Radial Shear Rolling Regimes on the Homogeneity of Structural-Phase State, Mechanical Properties and Fatigue of near β Titanium AlloyProgress towards a Complete Model of Metal Additive ManufacturingInvestigation of Three-Dimensional Geometry of Butterfly Martensite and Analysis of Relationship between Hardness of Lath/Butterfly Two-Phase Martensite and its Grain Thickness in Medium-Carbon SteelEffect of Cold Reduction Rate on Ferrite Recrystallization Behavior during Annealing in Low-Carbon Steel with Different Initial MicrostructuresSteel Production Technology Development for the Manufacture of Pipes Used in the Extraction and Transportation of Petroleum ProductsMechanical Joining Utilizing Friction Stir FormingThreshold Voltage Control for MONOS Nonvolatile Memory with High-k HfN/HfO2 Stacked Layers for Analog Memory ApplicationEffect of Aging Heat Treatment at 400-600°C on the Microstructure and Tensile Properties of 15Cr-15Ni Ti-Stabilized Steel Cladding In Situ Neutron Diffraction Measurement during Bainite Transformation and Accompanying Carbon Enrichment in Austenite at iMATERIA, J-PARC MLFMetallurgy of Highly Wear-Resistant Indefinite-Chill Work Roll Materials for Hot Rolling MillsAnisotropy of Plastic Deformation in Hexagonal MetalsThe Multiphase Micro- and Nanostructures of 0.2 and 0.4 C Direct-Quenched and Partitioned SteelsWhen 3D Printing Meets Tribological Demands - Surface Functionalization Technologies as Added Value of Existing and New Emerging ProductsA Novel Method for Evaluation of Chromium Evaporation from Solid Oxide Fuel Cells Interconnects: A Feasibility StudyMicrostructure Development in the Bonding Zone of Explosively Welded Ti and Cu SheetsEffect of Nano Sodium Titanate Whisker and Aramid Pulp on the Friction and Wear Behavior of Resin-Based Brake MaterialEffect of Nb on the Austenite Microstructural Homogeneity of Hot Rolled RebarsThe Influence of the Sintering Temperature on the Properties of the 0.98Pb(Zr1-xTix)O3 - 0.02La(Fe3+0.5, Nb5+0.5)O3 Ceramic SystemsThe Occurrence of a Peripheral Coarse Grain Zone (PCGZ) in Extruded Bars of AA 7108Microstructure after Solution Annealing of the Nuclear Grade Austenitic Stainless Steel DIN 1.4970Application of Image Analysis Method Combined with Microhardness Measurement to Determine Phase FractionsStability of Ordered B2-βO and Disordered BCC-β Phases in Tial - A First Principles StudyThe Influence of Process Parameters on Structure of YSZ Coating Deposited by Plasma Spraying on AISI 316L Stainless Steel Surface by APS Method and on Ti6Al4V Titanium Alloy Surface by PS-PVD MethodMicrostructure of Al-2.5Fe Binary Alloy Fabricated by Laser Powder Bed FusionEffect of Extrusion Temperature and Thermal Treatment on Microstructure and Mechanical Properties of Ti-1300 Alloy TubeMicrostructure and Mechanical Properties of a Lamellar-Structured Low-Alloy TRIP SteelNear-Threshold Fatigue Crack Growth Behavior of ECAPed Ultrafine-Grained CopperMicrostructure Evolution during Strain-Induced Transformation of Austenite in an Austempered Ductile Iron (ADI)Influence of Heat and Surface Treatments on the Fatigue Response of DMLS Manufactured AlSi10mgMicrostructure Evolution during Multiaxial Processing of TA6VMechanism of Void Formation during Brazing of Ni Paste Brazing Filler MetalInternal Dislocation Density in Deformed GlidCop from X-Ray Line Profile AnalysisEffect of Stacking Fault Energy and Solute Atoms on Microstructural Evolutions of FCC Metals Processed by Severe Plastic DeformationFriction and Wear Response of a Hard-Anodized AA6082Standardization of Cosα Method for X-Ray Stress MeasurementEffects of Alloying Elements on the Stability of ω-Fe Phase in Steel: A Density Functional Theory StudyEffects of Peening Direction on Reverse Transformation Induced by Shot-Peening for Fe-33%Ni AlloyNon-Parametric Comparison of Crystallographic Orientation DistributionsMetal-Free and Carbon-Free Flexible Self-Supporting Thin Film ElectrodesFabrication of Silver-Nanowire/PVDF Self-Supporting Thin Flexible Electrode MembranesMiniaturized Blood Sampling System with Integrated Sample PreparationFrom Biomaterial to Organoid - Bioprinting for PracticeResidual Stress in Automotive Powertrains: Methods and AnalysesMagnetization and XRD Studies of Laser Heat Treated SmCo5 PowdersHigh Energy Surface Implantation by Ion Nitrogen of Ultra- Fine Grained Ti-6Al-4V Alloy for Engineering ApplicationIndustrial Fe-Simulation of Roughing Using an Automatic Solver Shifting TechniqueSpinning Formability of Al-Mg-Si AlloyDeformation Behavior of Single Particle Cold Spray Ti-6Al-4V SplatsEffects of Microstructure on the Hydrogen Embrittlement Resistance of Ultra High Strength Martensitic Steel SheetsOptimization of Preform for Stub Axle Forging Using Simulation SoftwareHydrogen Embrittlement and Hydrogen Trapping Behaviour in Advanced High Strength SteelsProperties of Alumina Coatings Deposited by Detonation SprayingExperimental Study and Modelling of the Ferritic Steel Anisotropic Behavior under Associated and Non-Associated Flow RuleEffect of Silicon Content on the Decomposition of Austenite in 0.4C Steel during Quenching and Partitioning TreatmentMicrostructure and Shape Memory Behavior of Ti-18Nb-6Zr (at.%) AlloyTitanium Alloy Milling Using Abrasive Water Jet for Repair Application: Modifications in Surface Quality and Material Integrity Following Plain Water Jet CleaningHigh-Temperature Oxidation of AISI441 Ferritic Stainless Steel for Solid Oxide Fuel CellsEffect of Interstitial Elements on the Cryogenic Mechanical Behavior of FCC High Entropy AlloysMicrostructure Refinement Effect on EUROFER 97 Steel for Nuclear Fusion ApplicationThe Effect of Long-Term Heating on Thermal Stability of Ultra-Fine Grained Titanium Alloy VT8M-1 Processed by Rotary SwagingStructure and Microstructure of Advanced Materials Characterized by Neutron DiffractionEvaluation of Interfacial Thermal Resistance of Al-AlN Composites by Using Image-Based CalculationThe Effect of Ni Precursor Salts on Diatomite Supported Ni-Mg Catalysts in Methanation of CO2Performance of a Matrix Type High Speed Steel after Deep Cryogenic and Low Tempering TemperatureDevelopment of High-Accuracy Simulation Test Technology for Hot StampingEffect of Temperature and Humidity on Degradation Behavior of Cu/Epoxy Interface under High Temperature and High Humidity AgingTensile Deformation of Si Single Crystals at High Temperatures In Situ Evaluation of the Joining Defects in a Pb-Free Soldered JointEvaluation of Tensile Shear Strength for Lap Joint of Dissimilar SteelsMicrostructure Modification of 3D Printed Aluminium Alloys by Friction Stir ProcessingInvestigation of Bonding Strength of Al Solid Phase Diffusion Bonded Joint with Surface Treatment Using Electrolyzed WaterPowders for Additive Manufacturing: From Design to CertificationMechanical Property and Heat Treatment Behaviour of Ti-Zr-Fe AlloysStudy of High Temperature Properties of AlSi10Mg Alloy Produced by Laser-Based Powder Bed FusionOptimization of Molecular Characteristics via Machine Learning Based on Continuous Representation of MoleculesUtilisation of Titanium and Titanium Dioxide as Scaffolds for Proliferating Coral ReefImprovement of Strength and Ductility by Combining Static Recrystallization and Unique Heat Treatment in Co-20Cr-15W-10Ni Alloy for Stent ApplicationEffects of Carbon Content Change on Growth of Compound Layer in Surface of Nitrided SteelBending and Welding of New High Oxidation Material - Thor™ 115Surface Morphology of Refractory Metals Submitted to a Single Laser PulseIntegral Computer Model for Simulating Microstructure Evolution during Thermomechanical Processing and Heat Treatment of Steels and Predicting their Final Mechanical PropertiesStudies on Thermomechanical Cycling Characteristics of an Ni-Ti-Cu Shape Memory AlloyFinite Element Analysis of Surface Modification of Titanium Alloy Used for Hip ImplantForming an Optically Transparent Graphene Film via the Transformation of C60 MoleculesEffect of the Pre-Strain on the Elastic Behavior of a Dual-Phase Steel with Different Martensite ContentsAdhesion Properties of Thin Film Multilayers: Comparison of Nanoindentation and Four-Point-Bending TechniquesEffect of Strain Rate on Compressive Behavior of a ZrCuNiAl Bulk Metallic Glass at Room TemperatureEffect of Cellular Dislocation Structure on the Strength of Additively Manufactured 316L Stainless SteelSyngas Production by Dry Methane Reforming over Mg Doped NiO-ZrO2 CatalystsDeformation Property of Dense Oxide Coated Magnesium Alloy SurfaceRemelting of Thermal Spraying Coatings - Technologies, Properties and ApplicationsProcessing of Nanostructured Bulk Fe-Cr Alloys by Severe Plastic DeformationStudy of the Microstructure and Mechanical Properties Obtained by Laser Boost in SLM Process for the Ti-64 AlloyThe Influence of HPT on Microstructure and Wear Resistance of Al-7wt%Si-2wt%Fe AlloyMechanical Behaviour of Rubber Material with Consideration to Mullins EffectInvestigation on Surface Roughness in Electron Beam Selective Melting by Mesoscale ModelStatic Recrystallization in Aluminum/Graphene CompositesCorrelation of Segregation Energies of Ni and Fe with Mendeleev NumberOperando Monitoring of Charging Processes in Battery Cathodes by Magnetometry and Positron AnnihilationGoss Texture Evolution in a Grain-Oriented Fe-6.5wt%Si Steel Processed by Strip-CastingInvestigation of the Role of Intermetallic Phases in Microstructure of UFG Titanium VT8M-1 AlloyThe Effect of Aging Conditions on the Stress Relaxation Behavior of 17-7PH Stainless SteelFirst-Principles Study of Epoxy Resin Adhesion to Tin Oxide SurfaceFormation of Cemented Tungsten Carbide Layer with Compositional Gradient Processed by Directed Energy DepositionThe Impact of Interface Characteristics on Mechanical Performance of a Hot-Forged Cu/Ti-Coated-Diamond CompositeEffect of Chemical Composition on Grain Refinement of AlxCoCrFeNi High Entropy Alloys with NiAl Grain Boundary PrecipitatesImprovement of Mechanical Properties of Laminated Composites by Using Cryogenic Roll BondingDevelopment of Cu Coating on Ceramic Substrates by Low Pressure Cold Spray and its Deposition Mechanism AnalysisThermal Degradation Behavior of Hydrogen Permeability of Pd-Coated V-Alloy Membrane for Hydrogen Separation and PurificationAnalysis of Different Thermal Conductivity Measurements for Al-Si Casting AlloysDislocations of Ti-600 Alloy Crept at 600°C with Two StressesMicrostructure and Mechanical Properties of Cu-Fe Alloys via Powder MetallurgyNumerical Simulation of Microstructure Evolution during Continuous Hot Rolling Process of GCr15 Steel RodEffect of Tempering Time on Microstructure and Mechanical Properties of SA738 Gr.B SteelThe Microstructure and Properties of Low Carbon PM 625 Alloy for Marine-Based ApplicationEfficiency of Microstructure Refinement in Ti-Based AlloysMetallic Composites, Prepared by Deformation ProcessingThe Effect of Deformation Strain on Texture Uniformity in Tantalum Sheet during Asymmetric Cross RollingEffects of Powder Microscopic Defects on Densification and Mechanical Properties of WC via Spark Plasma SinteringThree-Dimensional Characterization of Morphology and Crystallography of a Gold Nanoisland FilmUnmixed Joint of A1050 and C1020 by Friction Stir Butt WeldingSpark Plasma Sintering of Paper-Derived Ti3AlC2-Based Composites: Influence of Sintering TemperatureFabrication of Be-Ta Ti Alloys without Pre-Alloyed Powders via SLMMartensitic Transformation of High-Entropy and Medium-Entropy Shape Memory AlloysSuppression of Intergranular Fracture in 7000 Series Aluminum AlloysElasto-Plastic Deformation of Heterogeneous Metallic Materials: An Experimental Approach with AlMg4Si10Effects of Tensile Testing Temperature on Mechanical Properties and Deformation Behavior in Medium Mn SteelsCharacteristics of Cube Orientation for Pure Iron Tape Fabricated by Cold Rolling and AnnealingThe Application of Neutron Diffraction Techniques (NDT) in Measuring Residual Strain-Stresses of Engineering MaterialsEvaluation of Color Tone and Exfoliation Resistance of Porcelain-Firing Ti with White Oxide Coating as an Opaque LayerEffects of Nb Content and Heat Treatment on Fretting Wear Behavior of Ti-Nb AlloysModelling Dilatometry Data of Isothermal ω-Phase Formation in a Strongly β-Stabilised TiV-AlloyHardness Prediction of AA 2024-T3 FSW WeldDensity Functional Theory Study of the Adsorption of Metal Adatoms on GrapheneInvestigation of CGHAZ Simulations of Low-Carbon Bainitic SteelsGrey-Fuzzy Logic Based Approach in Multi-Response Optimization of Semi-Solid Forging of A356 Aluminium AlloyMicrostructure Factor of Creep Behavior in Near-α Ti Alloy