PrefaceChapter 1: Polymers and CompositesABS/AgZrP Nanocomposite Additive Manufacturing Filament for Antibacterial ApplicationsPrediction of Mechanical Properties and Failure Behavior of Nano-Alumina Reinforced Poly(Lactic) Acid Composite for Fused Deposition Modeling 3D Printing via Finite Element AnalysisEffect of Silica/M-BNT/BNT Ternary Filler Loading on the Curing Properties of Natural Rubber VulcanizatesEffect of Addition Amount of Surface Treated Wood Flour on Moisture Absorption Property of Green CompositePLA/MWCNT Nanocomposite: Improved Electrical, Thermal and Antibacterial Properties for Fused Deposition Modelling Additive Manufacturing ApplicationsEffects of Wood Flour Reinforcement on the Warpage and Compressive Strength of 3D Printed HDPEsMicromechanics-Based Thermo-Mechanical Simulation of SCS-6 Fiber-Reinforced Ti-6Al-7Nb Matrix NanocompositeCoral Concrete: Overview, Composition and its Behavior in EnvironmentDevelopment and Comparative Analysis of MWCNT-Polymer Composites for Bioelectronics ApplicationMetal Matrix Composite Developed with Marine Grades: A ReviewChapter 2: Functional and Special MaterialsExperimental Study of Magnetic Materials Obtained via Fusing with Laser RadiationIntegral Assessment of Antistatic Properties of Materials Used in Individual Safety GearTechnological Method of Using Functional Materials in a Heat-Protective Clothing PackageModel of SPS Two-Stadium Synthesis and Densification Reactor Applied for Ultrafine Zirconium Nitride PowderThermal Conductivity of Insulation Material: Effect of Moisture Content and Wet-Drying CycleThixotropic Magnetorheological Fluid for Controlled Vibration MountsChapter 3: Properties and Processing of AlloysA Precision Analysis of Machining Incoloy 901 Aerospace Materials with Cemented Carpide Tools by the Taguchi MethodThe Promise of Mg-Li Based Alloys for Biomedical Implant MaterialsChapter 4: Tribological ResearchEffect of Load on Surface Roughness of PPS Thrust Bearings under Rolling Contact Fatigue in WaterObservation of Mode I Crack Growth Behavior in 4.762 mm Diameter-Silicon Nitride Ball under Compressive-Tensile Cyclic Loadings