PrefaceChapter 1: Materials Processing TechnologiesFatigue Performance and Impact Toughness of PBF-LB Manufactured AlSi 10MgDesign of Experiment for Determining Setting Parameter on Plasma Arc Machining for Stainless Steel Plate Cutting with Full Factorial DesignTitanium Nitriding: A Systematic Literature ReviewSheet Forming of Roll Cast Aluminum Alloy for Die CastingMechanical Behavior and Void Analysis of 3D Printed PEEK by Fused Deposition Modeling (FDM) with Varying Infill PatternsPrintability and Mechanical Properties of PLA/Iron Composites for FDM 3D PrintingChapter 2: Materials for Opto- and MicroelectronicsEnhanced Electrical Conductivity of Graphene-Incorporated Copper Wire and its Performances on Coaxial Cable Application at Sub 6 GHzMagneto-Conductive and Magnetic Properties in La1-xSrxMnO3 Thin Films on a-SiO2 Substrates Produced by Metal Organic Decomposition MethodExperiments of Failure and Damage in ITO-Coated PC/FPC with ACF Bonding due to Bending FatigueFabrication of Liquid-Metal Printed 2D Tin Oxide Nanosheets for Optoelectronic ApplicationsChapter 3: Chemical and Food EngineeringHydrogen Production from Rice Husk: Techno-Economic and Life Cycle AnalysisImproving Efficiency of Heat Pump Dryer Using R32 Refrigerant by NanofluidComparative Study on Performance of Passive and Active Solar DryerChapter 4: Waste Treatment and Biomass ProcessingCatalytic Pyrolysis of Biomass Waste Mixture over Activated Carbon and Zeolite Catalyst for the Production Bio OilPyrolytic Plastic Oil Distillation Study of Five Mixed Plastic Waste PyrolysisThe Effect of Drying Temperature Variation on the Production of Porang Starch Bioplastics with Sorbitol Plasticizer on Mechanical and Thermal PropertiesChapter 5: Measurements, Testing and MonitoringEffect Evaluation of Repeated Compression for Tactile Hardening of Cotton Pile Towel by Indentation TestIntelligent Identification of Chinese and Australian Merino Wool Fibers Based on Image RecognitionNeural Network Based Determination of the Degree of Fiber Mixing in Hybrid Yarns and Composites In Situ Measurement of Twist Propagation and Yarn Tension with Superconducting Magnetic Bearing Twisting Element for Ring Spinning Process