This issue represents to readers the last research results and practical decisions in metallurgy of alloys and steel, technologies of their processing, technologies and materials for wastewater treatment, and also in the area of building materials and construction technologies. This issue will be helpful for specialists in metallurgy, materials processing, wastewater treatment and buildings.
Les mer
Special topic volume with invited peer-reviewed papers only
PrefaceChapter 1: Metallurgical and Metal Processing TechnologiesEffect of Sr and Ni Addition on Microstructure, Tensile Behavior and Electrical Conductivity of Squeeze Cast Al-6Si-3Cu Al AlloyEnlarged Zn Content Improves Fatigue Crack Propagation Resistance of Two Al-Zn-Mg-Cu Alloys with Multiple Aging TempersStudy of Quench Sensitivity and Microstructure Evolution of Al-Mg-Si Alloy SheetsEffect of the Inhomogeneity of Material Properties on the Quenching and Pre-Stretching Residual Stress in Aluminum AlloyIntegrated Design and Manufacturing of Aviation Aluminum Alloy Support Based on SLM TechnologyEffects of Deformation Rate on the Mechanical Properties of an Industrial Al-Zn-Mg-Cu AlloyEffect of Fe-Rich Phases on Fracture Toughness of High Strength Al-Zn-Mg-Cu AlloyEffect of Cu Content on the Microstructures of As-Cast and Homogenized Al-Cu-Mg-Ag AlloysEffect of Zn/Mg Ratio on Microstructure Evolution of Al-Zn-Mg-Cu Alloys during HomogenizationSecond Phase Dissolution Evolution of an As-Cast Al-4.0Cu-1.0Li-0.4Mg-0.3Ag-0.1Zr Alloy during Multiple Homogenization ProcessesRegulate and Control Grain Structure Characteristics and Mechanical Properties Control of Al-Zn-Mg-Cu AlloyEffect of Pre-Deformation Degree on the Mechanical Properties and Microstructural Evolution of a Novel Al-Cu-Li AlloyMetal Injection Molding Using Gas-Assisted Technology for Optimizing Density Uniformity and Part Weight ReductionSimulation Research on Cold Extrusion Strengthening and Reaming of 7050 Aluminum Alloy Plate HoleChapter 2: Functional MaterialsImpurity Characterization by LA-ICP-MS in Terbium Metal after Solid State Electrotransport PurificationSpectroscopic Properties and Micro-Structure for Promising Solar Cell Application of Ruthenium-Diphenyl Carbazide (RuDPC) ComplexChapter 3: Wastewater TreatmentAdvanced Wastewater Treatment by Using Entrapped nZVI into Alginate (Ag) Biopolymer: Adsorption Isotherm, Kinetic Models, and Statistical AnalysisThermodynamic Equilibrium Kinetics of Sewage Sludge Ash Pellets for the Removal of Methylene Blue (MB) from Aqueous SolutionsReduction of Biological Contaminants from Municipal Wastewater by Encapsulated nZVI in Alginate (Ag) Polymer: Reduction Mechanism with Artificial Intelligence ApproachTreatment of Chromium from Tannery Wastewater Using Nano-Bio Polymer ComplexChapter 4: Materials and Technologies in ConstructionUsing Glass Wastes as Partial Replacement of Coarse Aggregates in ConcreteImproving the Performance of Cement Mortar Using Granite Powder and Nano-SilicaExperimental Study of the Effect of Partial Replacement of Cement with Glass Powder on Concrete PropertiesEvaluating the Use of Waste Materials in Building Envelopes for Energy Efficiency: A Theoretical and Empirical StudyProperties and Microstructure of High Strength Concrete Incorporating Different Supplementary Cementitious MaterialsThermal and Mechanical Properties of Mortar Incorporated with Phase Change Materials (PCMs)Experimental Study of RC Column Strength Restoration after Core Drilling Using Different Strengthening TechniquesInvestigation of Tensile Lap-Splice Hybrid Steel Bars Used in RC Beams under Flexure
Les mer

Produktdetaljer

ISBN
9783036400792
Publisert
2022-06-30
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
650 gr
Høyde
240 mm
Bredde
170 mm
Dybde
15 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
306