PrefaceChapter 1: Composites, Polymers and CeramicsAnalysis of the Upshot of Heat Treatment on Properties of Magnesium Hybrid CompositesA Comparative Study of the Effect of Natural Fillers Embedded in Jute/Basalt Hybrid CompositePerformance and Mechanical Characterization of Tufted and Untufted Woven Pine Apple Leaf Fibre Reinforced with Poly Lactic Acid Green CompositesEffect of Electrical Poling on the Structural, Dielectric, and Photoluminescence Properties of Eu3+ Substituted Eco-Friendly Ferroelectric Material Na0.5Bi0.5TiO3Impetus Yield of Acrylic Top Cover Pyramid Solar still due to Furthered Thermal Conductivity of MnO2 and PANI-MnO2 Nanocomposite MaterialsMWCNT Filled Banana-Rice Husk Epoxy Hybrid Natural Fiber Polymer CompositesMacrostructure and Fracture Behaviour of Rice Husk and MWCNT Dispersion Strengthened Alkali Treated Banana Fiber Matrix Hybrid CompositesExperimental Study of Fiber Orientation on the Mechanical Properties of Glass Fiber Reinforced Thermoplastic CompositesProcessing and Mechanical Properties of (Hf-Ta-Zr-Nb-Ti)CA Study of the Relationship between the Rate of Return Strain of Polytetrafluoroethylene on Time, Mechanical Stress and Dose of Electron IrradiationPredicting the Climatic Resistance of the Material and the Durability of the Structural Elements of the Composite Tower of the Power LineDevelopment of Digital Models of Physical and Mechanical Characteristics of Biodegradable Polymers Using the Example of Compositions Based on Low Density Polyethylene with Natural RubberMathematical Modeling in Studying the Electrophysical Properties of Syndiotactic 1,2-PolybutadieneResearch of Moisture Sorption by Laminated Composite MaterialsInfluence of Filler Concentration on the Mechanical Properties of a Polymer CompositeMaterials for the Needs of Agriculture Based on Biopolymers: A Comparative Analysis of Physical and Mechanical PropertiesStudy of Thermal Aging of the PCM Using Acoustic Emission and Optical MicroscopyDevelopment of Heat-Resistant Composite Foam MaterialStudies of Dielectric Characteristics of Polymer Films in a High-Frequency Electromagnetic FieldMaterial Parameter Assessment for Noise-Absorbing Devices in Shoe HeelsChapter 2: Microstructure, Properties and Processing of Structural MetalsMicrostructure Analysis of Progressive Secondary AlSi7Mg0.6 Alloy with Higher Fe Content Using Electron Metallography TechniquesComparison of Microstructure and Properties of Nickel-Copper Alloy Prepared by Casting and Laser Powder Bed Fusion ProcessFormation of Sulphides in As-Cast GOES Thin StripsCharacterisation of a San Mai Steel Composite for the Manufacture of KnivesNumerical Simulation of the Welding Process during the Main Circulation Pump Impeller RepairA Study of Cut Surface after the Abrasive Water Jet Application on the MS1 Material Prepared by DMLS MethodThe Influence of Progressive Cladding Technologies on Layers QualityChapter 3: Building MaterialsCreep of Foam Concrete from the Position of the Hereditary Theory of AgingDurability of Asphalt Concrete with Mineral Fillers Made of Non-Carbonate Raw MaterialsThe Effect of the Dispersion Nickel Slag Additive on the Strength of Ceramic BricksMechanical Properties of Sand-Cement Mortar with Different Water/Cement Ratio under Thermal Gradient ConditionsAging of Structural Materials Modified with Polymer Additives in Cold Climate ConditionsAnalysis and Development of Innovative Concrete Compositions in the Republic of BashkortostanNonlinear Modeling of Heat Distribution during a Concreting Beam, Using a Heating Electric WireMineral Fillers Influence on Structure Formation and Properties of Asphalt ConcreteIncreasing Sedimentation Stability of Cement-Mineral Suspensions by Adding the Hydroxyl-Containing Water-Soluble PolymersDevelopment of Acoustic and Thermal Insulation Materials from Pantyhose WasteFlattening of Bamboo Culm while Softening in Palm Oil and Subsequent Mechanical CharacterizationPotential Construction Applications of Sustainable 3D Printed Elements Made from Plastic WasteThermal and Flammability Properties of Flame Retardant Phase Change Material for Buildings ApplicationsAdditive Manufacturing with Environmentally Sustainable Materials for Shell Envelop SystemGreen Building Materials: Mechanical Performance and Environmental Sustainability