PrefaceThe Application of Physical Simulation in Hot and Cold Rolling of SteelsDevelopment and Application of a Thermal Microstructure Model of Laminar Cooling of an API X70 Microalloyed SteelCharacterization and Separation of Damage Mechanisms of Extruded Case-Hardening Steel AISI 5115 under Cyclic Axial-Torsional LoadingEffect of Mo and Mo+Nb Additions on the Phase Transformation and Microstructure of a Developed Low-Carbon CrNiMnB Ultrahigh-Strength Steels with a Preceding Hot DeformationEffect of Rapid Induction Tempering on the Mechanical Properties and Microstructure of Ultra-High Strength SteelEffect of Nitrogen Impurity on the Tensile Ductility and Impact Toughness of Al-Bearing DQP SteelsMicrostructural Characteristics and Mechanical Properties of Nanostructured Bainite Processed through High and Low Temperature Ausforming and Isothermal Holding near Ms in a Medium Carbon SteelAssessment of Mechanical Properties and Microstructure of EUROFER97 Steel after Thermo-Mechanical TreatmentsImpact of Ultra-Flash Tempering Treatment on the Microstructure and Mechanical Properties of High-Strength Carbon SteelPhenomenon-Based Model for Virtual Hot Strip RollingHot Stamping of Heavy-Gaged - Full Development and the Effect of Press Hardening Process on the Microstructure and Mechanical Properties of 22MnB5 + NbMo AlloyedGrain Refinement in 441 Ferritic Stainless Steel: High Versus Low Ti/Al Ratio after Casting and Hot RollingBack-Annealing of Hot Dip Galvanised Strip Steel Microalloyed with VanadiumComparative Study of Quench and Partition Processes in High Si and High Al SteelsThermomechanical Processing of V-N Structural Plate Steels in Low Temperature AusteniteInfluence of Hot Rolling Practice and Furnace Residence Time on the Strength and Toughness of Normalised Nb-Ti-V Structural Steel PlateMedium Carbon Q&P Steel with High Product of Strength and ElongationDelamination Fracture in a Medium-Carbon Low-Alloy Steel Subjected to TempformingEffects of Pre-Strain and Tempering on Mechanical Properties in High-Strength Martensitic SteelsEffect of Pressure on High-Temperature Oxidation of Ferritic Stainless SteelsTribological Behaviour of Low Temperature Plasma Assisted Carburized 316 L Steel Produced by L-PBF TechniqueRecent Development of Hot-Rolled AHSS for Lightweight ChassisEffect of Thermomechanical Rolling on Mechanical Properties of TRIP-Aided Steel SheetPrediction of TTR Diagrams via Physically Based Creep Simulations of Martensitic 9-12% Cr-SteelsInfluence of the Holding Thickness and Process in the Microstructure and Mechanical Properties of a Microalloyed 380 MPa Structural SteelApplication of CALPHAD for the Prediction of Matrix Phase Transformations in SteelTowards High Strength-Ductility Balance Using Double Annealing CyclesQuench and Bainite (Q&B) Thermal Cycle as an Alternative to Standard Quench and Partitioning (Q&P) Annealing to Produce AHSSImportance of through Hardening of Low-Alloy High Performance Martensitic Steels for Large Section ApplicationsEffects of Substrate Microstructure and Chemical Composition on Liquid Metal Embrittlement in Galvanized 3rd Generation AHSSDouble Soaking of Medium Manganese SteelsOn High Performance Steels for FastenersDesign and Properties of Hot Rolled Tough Carbide Free Bainitic SteelsLow Temperature Hot Press Forming of a Zinc Coated Third Generation Advanced High Strength Steel