Produktdetaljer
ISBN
9783035718416
Publisert
2022-03-03
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1020 gr
Høyde
240 mm
Bredde
170 mm
Dybde
26 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
526
Redaktør
The 4th International Russian Conference on Materials Science and Metallurgical Technology (RusMetalCon 2021, September 21-23, 2021, Russian Federation) was devoted to discussing the latest achievements in applied materials science and materials processing technologies, and metallurgy.
Les mer
<p>Selected peer-reviewed full text papers from the 4th International Russian Conference on Materials Science and Metallurgical Technology (RusMetalCon 2021)</p>
- Preface
- Chapter 1: Materials Synthesis, Treatment and Characterisation
- Technological Justification of the Possibility of Applying Wear-Resistant Coatings to Strengthen Machine Parts
- Composite Chrome Coatings in Aluminum Production
- Investigation of the Diffusion Zone Formation Mechanisms during the Production of Functional Steel-Aluminium Compositions by Arc Processes
- Ensuring the Quality of Self-Tapping Screws by Replacing the Thermochemical Treatment Line
- Studying the Structure and Properties of the Material of Screws for Spinal Osteosynthesis
- Mechanical Similarity Principle for Measurement Metal Hardness
- Mechanical Properties of Titanium Alloys at Operating and Pressure Shaping Temperatures Depending on the Aluminum and Molybdenum Equivalents
- Self-Healing of PVD-Coatings
- Influence of Environment at Laser Processing on Microhardness of Amorphous-Nanocrystalline Metal Alloy
- Laser-Induced Vacancies-Relief Ordered Structures on Titanium Surface
- Criteria for Evaluating the Manufacturability of Steels when Cutting with an Edge Tool
- Effect of Surface Tension of Intrapore Fluid on Physicochemical Properties of Al2O3·nH2O
- Mechanisms of Plastic Deformation during Laser Heat Treatment of ARMCO Pure Iron
- Study of the Behavior of SS34 in a Free and Heat-Treated State
- Determination of the Thermodynamic Stability of Intermetallic Compounds in Technical Aluminum
- The Impact of Ferro-and Superparamagnetic Nickel Particles on the Magnetism of YBCO Superconducting Ceramics
- Transport Properties of Ferromagnet/Superconductor and Superparamagnet/Superconductor Heterostructures Based on Ni/YBCO
- Modeling the Structural Strength of Materials on Disk Laboratory Specimens
- Viscosity of Microdestruction of Multilayer Composite and Method of its Revealing
- Structural and Surface Properties of Silicon Dioxides Obtained by Extraction from Sulfuric Acid Solutions of Nepheline Decomposition
- On the Problem of Getting a Correct Crack Shape in Fracture Toughness Specimens of Low-Carbon Steel
- Physical Aspects of Laser Steel Processing in the Magnetic Field
- Interaction of Ferromagnetically Ordered Clusters with Dislocations in Austenite and Twinning
- The Effect of Hole Manufacturing Technology on the Strength of Orthogonally Reinforced Fibrous Composites
- Evolution of Phase Composition and Thermal Expansion during Heating of VT23 Titanium Alloy
- FEM Simulation of Sclerometric Test of Nickel Aluminide Layered Coatings
- Correlation of the Chemical Composition and Structural Characteristics in the Partially Substituted Spinel Ferrites
- On the Issue of Safety of Multilayer Protective Angle Pieces for Metal Products Packaging
- Synthesis, Structure and Properties of Barium Ferrites BaFe11M1O19 (M= Al, Ti and Mn) Ceramics
- Investigation of the Effect of Thermocyclic Treatment on the Mechanical Properties of Steel
- Composite and Metal Structural Elements Joint Strength
- Multi-Walled Carbon Nanotubes in Electrolytic Chromium Plating
- Structural Features of Ni-Based Self-Fluxing Alloy Protective Layers, Produced by Non-Vacuum Electron Beam Cladding, Reinforced with Titanium-Based Particles
- Oxidation Resistance of “Ni-Cr-Si-B-Alloy + Nb + B” Protective Layers, Produced by Non-Vacuum Electron Beam Cladding Technique
- Chapter 2: Technologies in Pyrometallurgy and Electrometallurgy
- How the Chemistry of Raw Materials Affects Aluminum Produced in Cells with Prebaked Anodes
- Ducat Deposit Concentrate Pyrometallurgical Processing Technology
- Phase Diagrams of Me-O-C Systems to Study Metallurgical Processes
- Investigation of the Impurities Formation during the Silicon Melt Crystallization
- Study of Manganese Recovery in the CaO-SiO2-MgO-Al2O3-MnO-Fe2O3 System by Thermodynamic Simulation
- Protection of Cast Iron Sections of Gas-Collecting Bell of Soderberg Electrolysis Cell
- Research of Ferronickel Manufacturing Process by Selective Reduction of Poor Iron-Chromium-Nickel Ores
- Experimental Determination of the Main Parameters of the Refining Process of Rough Ferronickel, Obtained by Iron-Chromium-Nickel Selective Reduction
- Laboratory Assessment of the Technogenic Raw Materials Briquettes Effect on the Arc Furnace Electric Mode
- Impact of Initial Titanium Magnetite Ore Material Composition on Fluxed Pellet Metallurgical Properties
- Technology and Equipment for Sintering of Iron-Ore Materials by Adding Brown Iron Ores as Pulp during Sinter Mix Pelletizing at Ural Steel, JSC
- Analysis of the Granulometric Composition of the Feedstock Influence on Mechanical Properties of Iron Ore Pellets
- Chapter 3: Modern Problems of Foundry Production
- Features of Casting Magnesium Alloys in Chill Mold
- The Effect of Cooling Rate on Structure, Basic Mechanical and Special Properties of Complex Alloyed Manganese Cast Iron
- Development and Introduction of a New Composition of Wear-Resistant Cast Iron with Improved Performance Properties for Castings of Pump Parts
- On the Issue of Casting Copper Alloys in Chill Mold
- Control of Compacted Graphite Iron Production Process by Using the Thermal Analysis System
- Investment Casting for Oil and Gas Complex
- Chapter 4: Metal Forming
- Study of the Influence of Geometric Parameters on the Destruction Possibility of Aluminium Alloys during Pressing in Equal-Channel Step Matrix
- Local Thickenings and Thinnings of Hot Rolled Strips
- Bauschinger Effect, Masing Principle and Hencky Theorem for Bending Moment at Repeated Alternating-Sign Bending of Steel Sheet
- New Die Design for High-Pressure Torsion
- Change in Mechanical Properties During Drawing of Wire from Ni 99.6
- Roller Drawing of Simple Profiles from Hard-to-Form Alloys
- Investigation of Causes of Wall Thinning during Stamping of Halves of Stamped-Welded Elbows
- Studying on the Internal Quality of Steel at Various Stages of Production: Slab-Rolled Metal
- Chapter 5: Technologies of Welding Production
- Design and Manufacturing Technology of Round Samples for Studying the Effect of Defects on the Mechanical Properties of Welds
- Kinetics of the Formation of Bimetallic Compounds and the Distribution of Energy Components in the Explosion Welding Process
- Modeling of High Module Power Sources Systems Safety Processes
- Chapter 6: Additive Manufacturing
- Assessment of Fracture Mechanisms and Temperature of Ductile-Brittle Transition of Metals Obtained on the Basis of 3D Printing Using Neural Network Modeling and Fractal Analysis
- Optimization of 3D Printing Modes for Electric Arc Surfacing Using a Digital Twin of the Process
- Chapter 7: Industrial Ecology and Waste Recycling
- Hard Alloys Recycling as a Promising Direction of Technological Equipment for Machine-Building Production
- Methods for the Determination of Chloride-Ion in Soils from the Territory of Nearby Metallurgical Enterprises: Guidelines for Selection
- The Optimization of Sc Recovery from Red Mud Obtained by Water-Leaching of Bauxite-Sintering Product
- Influence of Particle Size Distribution of Wood Waste Pyrolysis Product on Productivity and Purification Efficiency
- The Use of Silicon Production Waste as an Effective Additive in the Manufacture and Machining of Various Materials
- Production Tests of the Don Water Purification and Disinfection Technology
- Analysis of the Leaching Stage Effect on the Vanadium Extraction from Technogenic Raw Materials
- Process Development for Integrated Use of Metallurgical Production Wastes
- Mathematical Models for an Energy Intensive Multistage Roasting Process of Pelletized Industrial Waste from Apatite-Nepheline Ores
- Expanding the Application Scope of Fine Dust from Petroleum Coke Calcining Furnaces in Aluminum Production
- Choosing the Reagent to Leach Fluorine from Spent Pot Lining of Aluminum Electrolysis Cells
- Improvement of the Technology of Fluorine Recovery from Solid Waste of Primary Aluminum Production
- Radial-Shear Rolling as a New Technological Solution for Recycling Bar Scrap of Ferrous Metals
Les mer
Produktdetaljer
ISBN
9783035718416
Publisert
2022-03-03
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1020 gr
Høyde
240 mm
Bredde
170 mm
Dybde
26 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
526
Redaktør