PrefaceChapter 1: Additive ManufacturingInfluence of Styrene-Ethylene-Butylene-Styrene and Stearic Acid on Poly(Lactic) Acid/Alumina Filament Composite for Fused Deposition Modeling ApplicationAssessment of Microstructural and Mechanical Properties of 420 Stainless Steel Fabricated by Laser Powder Bed FusionMechanical Behavior of Functionally Graded ABS Gyroid Lattice Structures Using Fused Deposition ModelingChapter 2: Surface Engineering and CoatingsImproving the Electroplating Coating Uniformity Based on Fuzzy Control of the Setting Value Using the Combined Defuzzification Method with the Presence of Stochastic InfluencesAssessment of Shear Bond Strength of Thermal Spray Coatings by Applying Prismatic SamplesChapter 3: Chemical and Hydrometallurgical TechnologiesSelective Copper Extraction from Spent Lithium-Ion BatteriesChapter 4: BioceramicsEffect of Sintering Temperature on the Properties of Calcia-Stabilized Zirconia (Ca-SZ) BioceramicsThe Effect of Glazing, Reglazing, and Polishing on Zirconia Biaxial Flexural StrengthUpscaling of CaO Derived from Cockle Shells as Stabilizer for Zirconia with Improved Properties for Dental ApplicationsCarbonate Apatite Crystal Formation in Novel Endodontic SealerChapter 5: Alternative Inorganic BindersDependence of Lignosulfonate Plasticizer Efficiency on the Activator Concentration in Alkali-Activated Blast Furnace Slag PasteInfluence of KOH and Granite Cutting Waste on the Formation of Calcium Silicate Hydrates under Hydrothermal Conditions at 200 °CSelf-Sensing Properties of Carbon Black or Graphite Modified Fly Ash Geopolymer under FlexureThe Development of Composites Based on Alkali-Activated Matrices Resistant to Extreme TemperaturesThe Technology of Processing of Bed Combustion Fly Ash for Cement Composite ProductionBelite-Rich Cement - A more Environmentally Friendly Alternative to Ordinary Portland CementInfluence of Nitrate Species A(NO3)2 on Physico-Mechanical Properties of the Aluminosilicate Adhesives for Wooden Structure